RunRyder RC
WATCH
 1 page 800 views POST REPLY
HomeAircraftHelicopterRadio - Servo - Gyro - Gov - Batt › Servo wire crimpers
10-19-2009 04:59 PM  8 years agoPost 1
Seablade

rrKey Veteran

earth

My Posts: All  Forum  Topic

Who knows an online shop where I can order a good crimper to make my own wire terminals.
Thanks

"Vini, Vidi, Velcro"

PM  EMAIL  GALLERY  Attn:RR  Quote
10-19-2009 05:06 PM  8 years agoPost 2
cdrking

rrElite Veteran

Seattle

My Posts: All  Forum  Topic

Crimping tools. Do NOT buy the cheaper tool! I tried it and my buddy has the better quality crimper and it works MUCH better.

Jeff

To hover is divine, the alternative is rather PLANE.

PM  EMAIL  GALLERY  Attn:RR  Quote
10-19-2009 08:55 PM  8 years agoPost 3
BarracudaHockey

rrMaster

Jacksonville FL

My Posts: All  Forum  Topic

+1
It's cheaper to buy good up front.

Andy
AMA 77227
http://www.jaxrc.com

PM  EMAIL  GALLERY  Attn:RR  Quote
10-19-2009 09:10 PM  8 years agoPost 4
Dood

rrProfessor

Wescanson

My Posts: All  Forum  Topic

I had to buy a $200 crimping tool for my job

They look like THIS

I don't think you could use a crimper like this for servo wires, I'm just saying.

  ▲
▲ ▲

PM  EMAIL  GALLERY  Attn:RR  Quote
10-19-2009 10:16 PM  8 years agoPost 5
Lamar Cooley

rrApprentice

Houma,La.,U.S.A.

My Posts: All  Forum  Topic

crimping tool
Check out Max Products Inc. ( MPI ) or "Cermark" They carry crimping tools. The crimping tool with the red handle seen at "crimping tool" is a good tool. I've use this kind for years and find it works great.
I hope this is of some small help.
Regards


Here when wanted.
There when needed.
Everywhere when looked for.

PM  EMAIL  GALLERY  Attn:RR  Quote
10-19-2009 10:27 PM  8 years agoPost 6
Andy from Sandy

rrElite Veteran

Bedfordshire, UK

My Posts: All  Forum  Topic

I purchased the deluxe crimping tool from Hansen Hobbies and the pressure was set at maximum. The instructional video and booklet make no mention of this. The tension needs reducing to almost the minimum to work properly. I must have wasted 25 to 30 crimps trying to work out how to use it.

Now it is set it works very well. Sometimes I don't push the wire in far enough and the insulation doesn't get crimped but the wire does. The crimps grap so tight even done badly I can't pull the wire out. I have to cut the crimp off and start again.

This one also works very well

http://ashtekelectronics.com/shop/s...ool-p29855.html

PM  EMAIL  GALLERY  Attn:RR  Quote
10-19-2009 11:03 PM  8 years agoPost 7
Seablade

rrKey Veteran

earth

My Posts: All  Forum  Topic

Thanks guys, I do appreciate it.

"Vini, Vidi, Velcro"

PM  EMAIL  GALLERY  Attn:RR  Quote
10-20-2009 12:37 AM  8 years agoPost 8
DSW

rrApprentice

Oviedo, Florida 32765

My Posts: All  Forum  Topic

PM  EMAIL  GALLERY  Attn:RR  Quote
10-20-2009 02:57 AM  8 years agoPost 9
Conrod

rrVeteran

Mount Dora , Florida

My Posts: All  Forum  Topic

I just received the 100 dollar setup from Hansen. includes the ratchet crimper (delux). Works great!!!

PM  EMAIL  GALLERY  Attn:RR  Quote
WATCH
 1 page 800 views POST REPLY
HomeAircraftHelicopterRadio - Servo - Gyro - Gov - Batt › Servo wire crimpers
 Print TOPIC  Make Suggestion 

 5  Topic Subscribe

Monday, July 23 - 1:24 am - Copyright © 2000-2018 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online