RunRyder RC
WATCH
 1 page 485 views Post Reply
Home✈️Aircraft🚁Helicoptere-AlignT-REX 450 › Trex 450 pro with a belt?
09-20-2009 05:51 PM  11 years ago
Topic Vote0Post 1
BOOGIE

rrElite Veteran

LAFAYETTE LA

MyPosts All Forum Topic
Trex 450 pro with a belt?
Has anyone dun this? Put a bet from the Sport on a pro?
MSH USA / Lynx Heli Innovations
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
09-20-2009 11:41 PM  11 years ago
BOOGIE

rrElite Veteran

LAFAYETTE LA

MyPosts All Forum Topic
guess not MSH USA / Lynx Heli Innovations
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
09-21-2009 12:14 AM  11 years ago
MikeInMobile

rrElite Veteran

Mobile, Alabama

MyPosts All Forum Topic
Who would want to use a belt instead of a torque tube .... a GIANT step backwards!
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
09-21-2009 12:53 AM  11 years ago
whyfly

rrVeteran

Temecula C.A.

MyPosts All Forum Topic
True......
SHARE  PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
09-21-2009 01:11 AM  11 years ago
BOOGIE

rrElite Veteran

LAFAYETTE LA

MyPosts All Forum Topic
This will be my beater and there are less parts and easer to fix at the feild using a belt I can't tell the dif on this small of a heli with my horrible heli skills I'm going to probably go 4S anywayMSH USA / Lynx Heli Innovations
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
09-21-2009 02:01 AM  11 years ago
MikeInMobile

rrElite Veteran

Mobile, Alabama

MyPosts All Forum Topic
The torque tube will increase the stability of the tail by reducing the slop in the rotation in the tail. Torque tubes are extremely reliable and durable when used with a carbon fiber tail boom!
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
09-21-2009 02:07 AM  11 years ago
BOOGIE

rrElite Veteran

LAFAYETTE LA

MyPosts All Forum Topic
Look in my gallery I have them both. I like TT but I want a belt on this heli thank thoughMSH USA / Lynx Heli Innovations
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
09-21-2009 03:50 AM  11 years ago
TonyTypeS

rrElite Veteran

New Orleans, LA & El Monte, CA

MyPosts All Forum Topic
If you want a belt driven tail than you should get the sport Boogie The heads are almost the same. Grips are a little bit different though.
The pro is not too difficult to work on. The tail is very easy to fix if you ever strip out a TT gear. You remove 4 screws that hold on the boom block on, remove the 2 screws that hold the boom brace, slide the boom block off and change the gears. Reverse the process and your done Should take any longer than 15 minutes if you take your time
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
WATCH
 1 page 485 views Post Reply
Home✈️Aircraft🚁Helicoptere-AlignT-REX 450 › Trex 450 pro with a belt?
Print TOPIC

 3  Topic Subscribe

Thursday, July 29 - 11:21 pm - Copyright © 2000-2021 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online