RunRyder RC
WATCH
 1 page 589 views Post Reply
Home✈️Aircraft🚁Helicoptere-AlignT-REX 250 › T250 powring out??.
09-19-2009 06:13 AM  11 years ago
Topic Vote0Post 1
rocco.sj

rrVeteran

California,

MyPosts All Forum Topic
T250 powring out??.
Has anyone had problems in-reguards with the T250 powering out while doing some 3D manuvers or in air flights?.Flying the T250 has been solid for me over 6 month until now?.Any pilot inputs will be appreciated!!.

Thanks-Ray
JR Americas
Evo Power Battery
Radio Frequency RC
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
09-19-2009 12:12 PM  11 years ago
helidevil

rrElite Veteran

Brunswick, ME

MyPosts All Forum Topic
mine's been working fine! what connectors are you using?
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
09-20-2009 03:28 AM  11 years ago
rocco.sj

rrVeteran

California,

MyPosts All Forum Topic
everything stock,except the gyro and tail servo.im using the jst connectors.will that make any difference?JR Americas
Evo Power Battery
Radio Frequency RC
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
09-20-2009 04:09 AM  11 years ago
dkshema

rrMaster

Cedar Rapids, IA

MyPosts All Forum Topic
Sounds as if your battery is on its way out.-----
Dave

* Making the World Better -- One Helicopter at a time! *

Team Heliproz
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
09-20-2009 05:11 AM  11 years ago
rocco.sj

rrVeteran

California,

MyPosts All Forum Topic
i actually thought of that it was my batteries,but changed them and put a brand spanking new ones and still the issue occuring which is powering out in mid flight. i changed the esc to another align, but nothing.my last solution is changed the esc and the motor to a higher amps and kv,like scorpion motor & esc.i just want to solved the issue before doing all the mods.JR Americas
Evo Power Battery
Radio Frequency RC
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
09-20-2009 01:15 PM  11 years ago
helidevil

rrElite Veteran

Brunswick, ME

MyPosts All Forum Topic
try a new AR6100?
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
09-21-2009 03:16 AM  11 years ago
rocco.sj

rrVeteran

California,

MyPosts All Forum Topic
im running the new AR6250.supposely carbon free static!.one of the align rep say's it might be my pitch being too low on the neg-side.i'll probaly break down the whole thing apart and re-assemble the whole thing again.Thanks everyone for your inputs!!.JR Americas
Evo Power Battery
Radio Frequency RC
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
09-21-2009 05:14 AM  11 years ago
dkshema

rrMaster

Cedar Rapids, IA

MyPosts All Forum Topic
Only other thing I can think of -- the stock 250 ESC has two battery voltage cutout settings. It ships in what has the higher cutoff voltage of the two choices. I initially had a problem where the speed control would start acting weird (slowing down) after a couple of minutes hovering. I put a voltage/current monitor in line with the battery and found this:

The green line is battery voltage, the blue line current. That oscillating stuff went away after I chose the lower of the two cutoff voltages in the stock ESC.
-----
Dave

* Making the World Better -- One Helicopter at a time! *

Team Heliproz
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
09-22-2009 04:25 AM  11 years ago
rocco.sj

rrVeteran

California,

MyPosts All Forum Topic
Thanks you guys,and thank you dkshma for posting the current reading on the stock esc.i was betting on the esc or the motor going bad,so might as well replace them both again. i see a post on the in fourms on the t250 motor.im thinking about the scorpion 3900kv and 25CC.

Thanks-Ray
JR Americas
Evo Power Battery
Radio Frequency RC
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
WATCH
 1 page 589 views Post Reply
Home✈️Aircraft🚁Helicoptere-AlignT-REX 250 › T250 powring out??.
Print TOPIC

 2  Topic Subscribe

Thursday, July 29 - 9:45 pm - Copyright © 2000-2021 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online