RunRyder RC
WATCH |
1 page 1193 views | Topic Closed |
| RunRyder | RunRyder |
|
|
0| Kiba
rrApprentice CA |
Trex 500 CF, Mavrikk G5, Belt & TT tail, Charger, BNF Selling this Trex 500 for a friend.After seeing me fly for the last year or so my friend decided he wanted a heli of his own-- so he went out and bought RealFlight 4.5 and spent hours on it. Then he decided he was ready for a real heli, so I purchased this Trex 500 for him off the classifieds here. I went through it, completely stripping it down and rebuilding it; everything is loctited, regreased the main and tail thrust bearings, I put protective sleeving over all the wiring, etc. I also changed the mainshaft bearings when I rebuilt it-- they were toast. I also bought him the DX7 and set it all up.I flew it 4 times or so for test purposes and then turned it over to him. Less than a minute into his first hover, it drifted out over the lawn and he got nervous so he set it down nice and easy-- unfortunately he mowed the lawn with the tail blades stripping 2 of the torque tube gears. I fixed them that night but he got cold feet and hasn't tried flying again. That was a month ago. He then asked me to sell it-- I tried to talk him out of it and give it another try, but being the good friend I am here's the listing.Heli is currently configured as follows:
Trex 500 CF Align 60A ESC Align 500L motor JR DS3421 cyclic servos JR G7703D gyro AR6100 receiver (the case is a pretty beat up from the previous owner but it works) Futaba 9257 tail servo Full black metal head KBDD tail blades Torque tube tail drive currently installed, a complete belt drive setup is also included Battery tray has been lowered (frames not cut but frame screws redrilled lower.) Align canopy + brand new Fusuno canopy 1X sets Mavrikk G5 Wide Chord blades (Sold the 1 spare set.) 3X sets of Radix cosmetic flaw blades (All sets NIP. No longer available, all sold.)Batteries included (not pictured): 2x Outrage 6S 25C 3000mah packs. Unknown number of cycles from the previous owner but they fly OK and don't come down hot or puffy.Spares inventory includes: Mikado flybarless head conversion (SOLD) Main blade grips (SOLD) Head block Black aluminum flybar cage 3X main gears 2x front TT gear sets 2x rear TT gear sets 2x booms 1x torque tube 1 pair skids 5x mainshafts 2x feathering spindles 3x flybars Align white carbon paddlesAlso available:Near-new condition DX7 including charger, neckstrap balancer, neckstrap, and kickstand. Has a Dimension Engineering voltage regulator for looooooong battery life! There is nothing wrong with the display, it only looks like it in the picture. All lines work and the contrast is fine. DX7 IS SOLD.Triton charger, used once.Pricing, including shipping:Heli + spares + batteries (BNF): $550 DX7 + accessories: $190 (SOLD) Charger: $90Please PM me if interested.          |
| SHARE PM EMAIL Attn:RR | |
| Kiba
rrApprentice CA |
|
| SHARE PM EMAIL Attn:RR | |
| Kiba
rrApprentice CA |
|
| SHARE PM EMAIL Attn:RR | |
| DqP
rrNovice Fort Lauderdale, FL - USA |
|
| SHARE PM EMAIL GALLERY Attn:RR | |
| Kiba
rrApprentice CA |
|
| SHARE PM EMAIL Attn:RR | |
WATCH |
1 page 1193 views | Topic Closed |
| RunRyder | RunRyder |
|
|
Classifieds › HELP-FAQ
|
Attention Buyers!
To receive feedback Post Reply in the seller’s topic.
The seller can then click your post's Add Classified Feedback link.
Attention Sellers!
Stating price is not mandatory but recommended. Post Reply commentary that interferes with the selling process
(and not replied to) will be removed upon request. Click Attn:RR on the offending classified post.
Repeated NIB-NIP sales are not allowed. Take it to EBay.
Buyer Beware!
RunRyder cannot vouch for any seller's or buyer's credibility and will not accept responsibility for any transactions resulting from the use of this site.
|
Monday, January 18 - 10:47 pm - Copyright © 2000-2021 RunRyder EMAIL • Enable Cookies
