RunRyder RC
WATCH
 1 page 539 views Post Reply
HomeRC & Power✈️Aircraft🚁HelicopterRadio - Servo - Gyro - Gov - Batt › UAF8 setup does not work
09-17-2009 06:43 PM  11 years ago
Topic Vote0Post 1
Hill

rrNovice

Netherlands

MyPosts All Forum Topic
UAF8 setup does not work
Hello,

I have a question concerning to a setup of my helicopter.

When I select the "Heli swh1" option in my UAF8 transmitter only one servo is moving when I move the pitch stick and or the aileron stick.

I have done several trouble shooting options, but without any result.

- The channels are setup right in the receiver.
- swashplate type is 120
- Heli is HK-450

Does any body have a clue what I do wrong?

Thanks
SHARE  PM  EMAIL  Attn:RR  Quote
09-17-2009 10:10 PM  11 years ago
jsenicka

rrProfessor

Eagle River, WI

MyPosts All Forum Topic
is swh1 an eCCPM config or a mCCPM config for the radio?

Sounds like a straight mechanical setup
Jim Senicka
Team Manager, GrandRC Flight Team
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
09-17-2009 11:35 PM  11 years ago
ppljr

rrApprentice

Dallas, TX (Grapevine)

MyPosts All Forum Topic
If it is a regular "8" not the "Super 8" then there is no ccpm mixing, at least no in the regular menu. There is a good book on programing the UAF8, also if you do a search you can find the way to set up the mixing.
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
09-18-2009 01:28 AM  11 years ago
PJRono

rrKey Veteran

Minnesota, Ya!

MyPosts All Forum Topic
You should be using channels 1-2-6 for you're cyclics. 1 and 6 are the side servos and 2 is the elevator or centerline of the heli servo.If you skip me I can't play!
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
09-18-2009 01:28 AM  11 years ago
PJRono

rrKey Veteran

Minnesota, Ya!

MyPosts All Forum Topic
I also think you need swh3. If I remember right.If you skip me I can't play!
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
09-18-2009 08:54 PM  11 years ago
Hill

rrNovice

Netherlands

MyPosts All Forum Topic
I tried all options you mentioned. Nothing really works. Do I have to do something with other mixers?
SHARE  PM  EMAIL  Attn:RR  Quote
09-19-2009 12:00 AM  11 years ago
PJRono

rrKey Veteran

Minnesota, Ya!

MyPosts All Forum Topic
Yes you will have to reverse channels to make them work right as well.If you skip me I can't play!
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
09-19-2009 08:21 PM  11 years ago
Hill

rrNovice

Netherlands

MyPosts All Forum Topic
What channels do I have to reverse? All servo's are moving correct. But they don't move together. I also reset everything for that model. And started all over with the setup. But still nothing moves correct.
SHARE  PM  EMAIL  Attn:RR  Quote
09-19-2009 10:29 PM  11 years ago
PJRono

rrKey Veteran

Minnesota, Ya!

MyPosts All Forum Topic
Sorry, unless you have the Super version of this radio it won't work for CCPM. My bad sorry.If you skip me I can't play!
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
09-21-2009 05:49 PM  11 years ago
Hill

rrNovice

Netherlands

MyPosts All Forum Topic
The problem seem to be solved. I had to use helisw2 and a mixer. Everything is working allright.

Thanks for the great support.
SHARE  PM  EMAIL  Attn:RR  Quote
WATCH
 1 page 539 views Post Reply
HomeRC & Power✈️Aircraft🚁HelicopterRadio - Servo - Gyro - Gov - Batt › UAF8 setup does not work
Print TOPIC

 2  Topic Subscribe

Tuesday, January 26 - 1:28 am - Copyright © 2000-2021 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online