RunRyder RC
WATCH
 1 page 356 views Topic Closed
09-16-2009 06:47 PM  11 years ago
Topic Vote0Post 1
TINY

rrApprentice

eunice louisiana

MyPosts All Forum Topic
atg help
im hooking up my atg im using a JR X9303 radio with the jr-R921 rec whic would be the best place to plug the gain wire from the ATG to the recieve
Infamous Butcher Angel Of Death
SHARE  PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR
09-16-2009 07:07 PM  11 years ago
Jag72

rrProfessor

South of Boston

MyPosts All Forum Topic
AUx 2
I always prefer to use the Aux 2 input and use that channel to get 3 headspeeds...
SHARE  PM  EMAIL  GALLERY  Attn:RR
09-16-2009 07:44 PM  11 years ago
KennyS

rrKey Veteran

Marble Falls, Tx

MyPosts All Forum Topic
atg help

im hooking up my atg im using a JR X9303 radio with the jr-R921 rec whic would be the best place to plug the gain wire from the ATG to the recieve
On the 9303, under device select on the gear channel there is the option for Gov. If you select Gov you will you go back into the main list of options, then you will be able to set a percentage for rpm's in each flight mode.
Only Fine Helis, Hobbywing
SHARE  PM  EMAIL  GALLERY  Attn:RR
09-16-2009 08:36 PM  11 years ago
Elgreco

rrVeteran

Montreal,QC-Canada

MyPosts All Forum Topic
As he said, on the gear channel and enable the governor menu on it through devise select menu.
Then just add percentages for the three flight conditions to give you the required head speed. You should really use a gview for that but from memory, 82 % gives me about 1850 and 92% is at 1970.

Using it on a Trex 700 with 82 gear ratio...

Hope this helps you.
Trex 550 V-BAR, Trex 700 V-BAR, N5-os55VBAR, TREX700E V-BAR /X9503
SHARE  PM  EMAIL  GALLERY  Attn:RR
WATCH
 1 page 356 views Topic Closed
Print TOPIC

 2  Topic Subscribe

Monday, January 25 - 9:42 am - Copyright © 2000-2021 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online