RunRyder RC
rrTV-PHOTO  GALLERIES  MY GALLERY   HELP-FAQ
🚁Helicopter Forum Topic
myHOME PM pmRR MEMBERS 282 ONLINE 1 EVENTS SEARCH REGISTER  START HERE
 3  Topic Subscribe
WATCH
  1 page 522 views Post Reply
Home › ✈️Aircraft › 🚁Helicopter › e-Electric General Discussion › how are you guys mounting your servos on 450's?
09-15-2009 10:57 PM  11 years ago
Topic Vote0Post 1
helibro

rrVeteran

hamilton, ohio

MyPosts All Forum Topic
how are you guys mounting your servos on 450's?
how is everyone mounting there servos on there 400 450 size helis, im geting ready to put some ds285mg's in are you all using the rubber gromets or just using the screws? thankshey! were is the reset button!
SHARE  PM  EMAIL  Attn:RR  Quote
09-15-2009 11:38 PM  11 years ago
0Post 2
Heli 770

rrProfessor

USA.

MyPosts All Forum Topic
Just screws.
SHARE  PM  EMAIL  Attn:RR  Quote
09-15-2009 11:41 PM  11 years ago
0Post 3
what_the_helli

rrKey Veteran

cookeville, tn USA

MyPosts All Forum Topic
You do not have to use grommets on electricsI put the fun in dysFUNctional :)
Team KBDD & Funding by TnPrintMasters.com
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
09-15-2009 11:48 PM  11 years ago
0Post 4
helibro

rrVeteran

hamilton, ohio

MyPosts All Forum Topic
ok i didnt think you needed the gromets but was just checking, so just the screw? or is there some type of plastic peice to put were the gromet would go? thankshey! were is the reset button!
SHARE  PM  EMAIL  Attn:RR  Quote
09-15-2009 11:53 PM  11 years ago
0Post 5
what_the_helli

rrKey Veteran

cookeville, tn USA

MyPosts All Forum Topic
just a screw and a washer is all that is needed.

Sometimes though it is just as easy to use the grommet and the brass sleeve and skip the washer.

I use what seems to fit best for each applicationI put the fun in dysFUNctional :)
Team KBDD & Funding by TnPrintMasters.com
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
09-16-2009 02:35 AM  11 years ago
0Post 6
helibro

rrVeteran

hamilton, ohio

MyPosts All Forum Topic
so its ok to use the rubber gromets then?hey! were is the reset button!
SHARE  PM  EMAIL  Attn:RR  Quote
09-16-2009 03:14 AM  11 years ago
0Post 7
what_the_helli

rrKey Veteran

cookeville, tn USA

MyPosts All Forum Topic
yes you can use them, you just don't NEED to use them. In a nitro machine there are so many vibes that grommets are necessary so you do not have a servo fail. Electrics don't have that vibe therefore grommets are optional.I put the fun in dysFUNctional :)
Team KBDD & Funding by TnPrintMasters.com
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
10-07-2009 01:36 AM  11 years ago
0Post 8
R22 pilot

rrNovice

Fountain Hills Arizona

MyPosts All Forum Topic
in addition...
Just my own observations, but watch the spacing too. The arm may be too far out with the grommet...just depends on the various servo tab. Also, if the servos are opposing, you may HAVE to use the grommets to have good clearance. Make sure the servos are not touching or rubbing each other.
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
WATCH
  1 page 522 views Post Reply
Home › ✈️Aircraft › 🚁Helicopter › e-Electric General Discussion › how are you guys mounting your servos on 450's?
Print TOPIC

 3  Topic Subscribe

Wednesday, January 27 - 5:01 am - Copyright © 2000-2021 RunRyder   EMAIL • Enable Cookies

Login Here
 New Subscriptions 
 Buddies Online