RunRyder RC
 6  Topic Subscribe
WATCH
 3 pages [ <<    <     1      2     ( 3 )    >    >> ] 2065 views POST REPLY
HomeAircraftHelicopterAlignOther › Purchasing a new Trex 600 NSP. Need suggestions.
09-07-2009 03:40 AM  8 years agoPost 41
LonR

rrElite Veteran

Macomb,Mi

My Posts: All  Forum  Topic

They both suck,walkera servos are 1000000X better .

600LE,OS55,OS PowerBoost pipe,Align 610's,Spartan

PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
09-07-2009 03:59 AM  8 years agoPost 42
Twrecks600

rrKey Veteran

Round Rock, Texas

My Posts: All  Forum  Topic

Question....

Since the AR 7100r has a built in regulator, how can you run the servos on 6v if the regulator regualtes to 5.2? Also, would I need to get a switch to turn the machine off an on since I won't be running the align 2-in-1? If so, what would you recommend?

So here is what I have so far...

Trex 600 NSP
DS 610 on cyclic
DS 650 on tail
AR 7100R
Gy 520

Bubbleless clunk
Metal fan
Header tank
Maverick G5 Wide chord blades
Switch glo
Rev limit sensor

PM  EMAIL  GALLERY  Attn:RR  Quote
09-07-2009 04:04 AM  8 years agoPost 43
Quicktoy

rrApprentice

Venice, FL USA

My Posts: All  Forum  Topic

Lmao at the walkeras
as far as the running at 6 volt. I don't I run them at 8. Was a typo. Many ways to do an on off. One is to put an on off switch. Other is to use bind plug as I do as your on off switch

Srimok, Goblin 770, Avant Aurora, Trex 700 Suzi Hans, 700 LE, 700 FBL, Trex 450 Dominator X2, HC500, and a crap ton of parts with no time to fly! :)

PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
09-07-2009 04:06 AM  8 years agoPost 44
FlaG8r

rrElite Veteran

Florida

My Posts: All  Forum  Topic

Question....

Since the AR 7100r has a built in regulator, how can you run the servos on 6v if the regulator regualtes to 5.2?
The AR 7100 regulates 5.2-voltage output to the Rudder, Gear, Aux 2 and Throttle channels allowing the cyclic servos to be powered at
high voltage for increased performance while the gyro and throttle
servos are powered by the necessary compatible lower voltage
(5.2V)

Life is tough, it's tougher if you're stupid

PM  EMAIL  GALLERY  Attn:RR  Quote
09-07-2009 04:12 AM  8 years agoPost 45
Twrecks600

rrKey Veteran

Round Rock, Texas

My Posts: All  Forum  Topic

Ok, that makes sense but that being the case, would I have to get a regulator for the cyclic servos if I am running a 2s or 3s lipo? Sorry for all the questions, but since I have never purchased brand new, I need as much info as I can!!

Hope I am not being a pest!!

PM  EMAIL  GALLERY  Attn:RR  Quote
09-07-2009 04:23 AM  8 years agoPost 46
FlaG8r

rrElite Veteran

Florida

My Posts: All  Forum  Topic

Yes you'll need a regulator.

Life is tough, it's tougher if you're stupid

PM  EMAIL  GALLERY  Attn:RR  Quote
09-07-2009 04:46 AM  8 years agoPost 47
Quicktoy

rrApprentice

Venice, FL USA

My Posts: All  Forum  Topic

No voltage regulator needed as the 7100r is one. Don't run a 3s. Receiver packs are 2s

Srimok, Goblin 770, Avant Aurora, Trex 700 Suzi Hans, 700 LE, 700 FBL, Trex 450 Dominator X2, HC500, and a crap ton of parts with no time to fly! :)

PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
WATCH
 3 pages [ <<    <     1      2     ( 3 )    >    >> ] 2065 views POST REPLY
HomeAircraftHelicopterAlignOther › Purchasing a new Trex 600 NSP. Need suggestions.
 Print TOPIC  Make Suggestion 

 6  Topic Subscribe

Saturday, June 23 - 3:43 am - Copyright © 2000-2018 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online