Servo output arms

rrTV-PHOTO GALLERIES MY GALLERY HELP-FAQ

myHOME PM pmRR MEMBERS 387 ONLINE 1 EVENTS SEARCH REGISTER START HERE

WATCH

1 page 470 views

Post Reply

RunRyder	RunRyder

Home › ✈️Aircraft › 🚁Helicopter › Align › T-REX 700N › Servo output arms

06-20-2009 11:09 PM 11 years ago

Topic Vote

0Post 1

QuantumPSI

rrElite Veteran

Atlanta, GA

MyPosts All Forum Topic

Servo output arms

So I'm going to be running 9451s and need some output arms/wheels. I'm debating between plastic and aluminum. I'm leaning towards aluminum but the problem I have is that there is no "point of failure" between the swash and servo (rather something else break than to stress the servo). What do you guys suggest?...now where was I, dh/dt = BS-dx/dt
I will fly you forever... till earth do us part

SHARE PM EMAIL GALLERY Attn:RR Quote

06-20-2009 11:25 PM 11 years ago

0Post 2

Ghostrider

rrElite Veteran

San Diego, CA

MyPosts All Forum Topic

I run the Align servo wheels all the way around including the tail servo. IMHO, I would not risk the servos with metal wheels/arms.

SHARE PM EMAIL GALLERY Attn:RR Quote

06-21-2009 12:09 AM 11 years ago

0Post 3

baddynergy

rrElite Veteran

sierra madre, ca- usa

MyPosts All Forum Topic

^^^ +1 on Sams advice. Align servos work great and have lots of options to get 0 subtrim.**Unattended children will be givin a shot of espresso and a puppy**

SHARE PM EMAIL GALLERY Attn:RR Quote

06-21-2009 12:19 AM 11 years ago

0Post 4

QuantumPSI

rrElite Veteran

Atlanta, GA

MyPosts All Forum Topic

Where can I get them (PM me this information)?...now where was I, dh/dt = BS-dx/dt
I will fly you forever... till earth do us part

SHARE PM EMAIL GALLERY Attn:RR Quote

06-21-2009 12:23 AM 11 years ago

0Post 5

baddynergy

rrElite Veteran

sierra madre, ca- usa

MyPosts All Forum Topic

From each and every dealer that sells Align parts.

rons
grand
amain
gyro
cajun
heli-proz
ready heli
heli direct**Unattended children will be givin a shot of espresso and a puppy**

SHARE PM EMAIL GALLERY Attn:RR Quote

06-22-2009 03:34 AM 11 years ago

0Post 6

marc8090

rrElite Veteran

Long Island, N.Y.

MyPosts All Forum Topic

The Align servo wheels will be listed under 600 nitro parts. I agree with everyone else to use these arms. I used aluminum servo arms years ago when they came out, but they are not necessary. They also sometimes don't fit well on servos with a metal output gear/splines.

SHARE PM EMAIL Attn:RR Quote

06-22-2009 03:36 AM 11 years ago

0Post 7

erict

rrApprentice

MyPosts All Forum Topic

part hn6048

http://www.readyheli.com/HN6048_Ali...tr_p/hn6048.htm

eric

SHARE PM EMAIL GALLERY Attn:RR Quote

WATCH

1 page 470 views