RunRyder RC
WATCH
 1 page 632 views Post Reply
Home✈️Aircraft🚁Helicoptere-MikadoLogo 600 › which blade is better for the logo 600?
06-20-2009 12:51 AM  11 years ago
Topic Vote0Post 1
J-Money

rrApprentice

Underground

MyPosts All Forum Topic
which blade is better for the logo 600?
just got my logo 600 and was woundering manaic 603 or 623 and if 623 can u still run 105 tails? What about curtis blades too? Thanks J
SHARE  PM  EMAIL  Attn:RR  Quote
06-20-2009 01:46 AM  11 years ago
Ronald Thomas

rrMaster

Gainesville, Fl, USA

MyPosts All Forum Topic
It really depends on the power system and the type of flying you plan on doing. As a rule of thumb though, If you are a 3D guy and are running a robust 10s setup, go with the 623s. If you are a mild guy and have a good setup, go with the 603s. For tails with either, I would stick with 92-95mm CF blades..........RonTeam MikadoUSA 480XXTreme, 550SX, 600SX, 700XXTreme, 800XXTreme!!
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
06-20-2009 03:04 AM  11 years ago
helicraze

rrElite Veteran

Victoria - Australia

MyPosts All Forum Topic
If you do go to 105MM get the quick uk tail upgrade, or your grips may break off, it has happened numerous times.
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
06-20-2009 03:29 AM  11 years ago
Ronald Thomas

rrMaster

Gainesville, Fl, USA

MyPosts All Forum Topic
^^^^^^^Which is why I said 92-95mm tails. Like Helicraze says, do the upgrade first.......RonTeam MikadoUSA 480XXTreme, 550SX, 600SX, 700XXTreme, 800XXTreme!!
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
06-20-2009 03:50 AM  11 years ago
jbdww

rrElite Veteran

Round Rock, Texas

MyPosts All Forum Topic
I have 95MM right now and when I punch out the tail swings a little bit so I am thinking of changing over to 105 with the Quick UK hub.
Joe
Skids Up
http://www.jbdww.com
http://twitter.com/jbdww/
SHARE  PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
06-20-2009 04:02 AM  11 years ago
Ronald Thomas

rrMaster

Gainesville, Fl, USA

MyPosts All Forum Topic
What gyro?Team MikadoUSA 480XXTreme, 550SX, 600SX, 700XXTreme, 800XXTreme!!
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
06-20-2009 04:06 AM  11 years ago
jbdww

rrElite Veteran

Round Rock, Texas

MyPosts All Forum Topic
I am using the VStabi. The tail is solid other than pitch punches.
Joe
Skids Up
http://www.jbdww.com
http://twitter.com/jbdww/
SHARE  PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
06-20-2009 05:49 AM  11 years ago
J-Money

rrApprentice

Underground

MyPosts All Forum Topic
Thank u all for the usefull infromation im a 3d guy so 623s and 105s with quick uk tail thanks again everyone. J
SHARE  PM  EMAIL  Attn:RR  Quote
06-22-2009 02:40 AM  11 years ago
jbdww

rrElite Veteran

Round Rock, Texas

MyPosts All Forum Topic
OK I put the Quick UK Tail hub on with CY 105MM tail blades and the heli now holds very well with punch outs and pitch pumping.
Joe
Skids Up
http://www.jbdww.com
http://twitter.com/jbdww/
SHARE  PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
06-22-2009 02:50 AM  11 years ago
Terrabit

rrElite Veteran

Seattle, WA - USA

MyPosts All Forum Topic
I'm running Gohbee 620's with CY 105's on the Quick UK tail in my vbar L600. It is powerful and precise.
SHARE  PM  EMAIL  Attn:RR  Quote
06-22-2009 08:17 AM  11 years ago
OICU812

rrMaster

Grande Prairie, Alberta, Canada

MyPosts All Forum Topic
Running 600mm SAB Red Devils and 105mm Radix tails, works well....Once upon a time there were Nitros, flybars and frequency pins...
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
WATCH
 1 page 632 views Post Reply
Home✈️Aircraft🚁Helicoptere-MikadoLogo 600 › which blade is better for the logo 600?
Print TOPIC

 4  Topic Subscribe

Saturday, January 23 - 1:46 am - Copyright © 2000-2021 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online