RunRyder RC
WATCH
 3 pages [ <<    <     1      2     ( 3 )    >    >> ] 1752 views Post Reply
Home✈️Aircraft🚁HelicopterHelicopter Main Discussion › ok im stumped TT53
06-21-2009 08:57 AM  11 years ago
Lota Fun R

rrApprentice

Acton, CA (So. Cal.)

MyPosts All Forum Topic
Not enough pressure in tank.

Make sure your fuel tank nipple is clear, run a small drill bit down it to be sure. Also use larger fuel line than you are now, if it is already large tubing then check for obstructions.

IF you're not using a filter properly it could have dirt in the needle/s. All fuel that enters engine must be filtered.
SHARE  PM  EMAIL  Attn:RR  Quote
06-21-2009 11:52 AM  11 years ago
Jeff polisena

rrElite Veteran

westpalmbeachflorida usa

MyPosts All Forum Topic
I read a previous post and remembered I had a problem like this also with a Align pipe . Had high needle 1/4 turn out to run good changed pipe and tuning was where it was supposed to be . I could run without pressure line a full tank without leaning because of Align pipe.I stole it ,flew it and gave it back ;)
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
WATCH
 3 pages [ <<    <     1      2     ( 3 )    >    >> ] 1752 views Post Reply
Home✈️Aircraft🚁HelicopterHelicopter Main Discussion › ok im stumped TT53
Print TOPIC

 7  Topic Subscribe

Saturday, January 23 - 1:07 am - Copyright © 2000-2021 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online