RunRyder RC
WATCH
 5 pages [ <<    <     2      3     ( 4 )     5     NEXT    >> ] 4332 views Topic Closed
Home🏬 Classifieds✈️Aircraft🚁Helicopter🏬Classifieds - Miscellaneous Sold  V-BLADES I HAVE BEEN SCAMMED
06-19-2009 02:05 PM  11 years ago
rudyy

rrElite Veteran

E. Amherst, NY

MyPosts All Forum Topic
Do you have the picture of the root thickness of both blades placed side by side? 2mm is quite a noticeable difference.
SHARE  PM  EMAIL  GALLERY  Attn:RR
06-19-2009 02:11 PM  11 years ago
T Koffler

rrVeteran

Cayuga, NY 13034

MyPosts All Forum Topic
If I'm understanding this right.. The blades are useless. Totally mismatched.. But, for $20 they are ok??? So you are happy spending $50 on blades that are crap??? I'm just a little confused....
Todd
SHARE  PM  EMAIL  GALLERY  Attn:RR
06-19-2009 02:21 PM  11 years ago
JimmyC

rrApprentice

...

MyPosts All Forum Topic
Do you have the picture of the root thickness of both blades placed side by side? 2mm is quite a noticeable difference.
Here's a picture from the original post.
http://runryder.com/t516958p1/?p=4252290#RR

SHARE  PM  EMAIL  GALLERY  Attn:RR
06-19-2009 02:27 PM  11 years ago
rudyy

rrElite Veteran

E. Amherst, NY

MyPosts All Forum Topic
I mean a side view close up picture of the two roots to see the difference.
SHARE  PM  EMAIL  GALLERY  Attn:RR
06-19-2009 02:35 PM  11 years ago
GyroFreak

rrProfessor

Orlando Florida ...28N 81W

MyPosts All Forum Topic
I do not like to go thru the trouble of shipping it back again because some people got better things to do
Cheeez man, you spent more time arguing than it would take to send them back !

Perhaps simtec used the blades and crashed them, so he can't send them back.
I think about the hereafter. I go somewhere to get something, then wonder what I'm here after ?
SHARE  PM  EMAIL  GALLERY  Attn:RR
06-19-2009 02:50 PM  11 years ago
Simtech

rrNovice

Philadelphia, PA - USA

MyPosts All Forum Topic
Blades are still intact good only as a decorative item for my Stratus but not for flying. To me it is worth $50.00 bucks holding while looking for an opportunity to find a match down the line here RR or eBay.

Notice the gap on the blade grip since there is a 2 x 1mm spacer installed.
SHARE  PM  EMAIL  Attn:RR
06-19-2009 02:57 PM  11 years ago
USNAviationjay

rrElite Veteran

Houston Tx USA

MyPosts All Forum Topic
ok.. since he has posted he has multiple screen names here on RR isnt that a bannable offense?

That's enough right there that anything this guy says is total fertilizer.

New Heliman vs a well known guy with flawless feedback..

with guys like Jag72 and Ron vouching for him.

let this guy rant all he wants.
the solution was offered he balked.. let him live with it.

and report this guy for multiple log ins.
SHARE  PM  EMAIL  GALLERY  Attn:RR
06-19-2009 03:00 PM  11 years ago
GyroFreak

rrProfessor

Orlando Florida ...28N 81W

MyPosts All Forum Topic
ok.. since he has posted he has multiple screen names here on RR isnt that a bannable offense?
How do you tell when someone has multiple screen names. That could be very useful when buying and selling.
I think about the hereafter. I go somewhere to get something, then wonder what I'm here after ?
SHARE  PM  EMAIL  GALLERY  Attn:RR
06-19-2009 03:06 PM  11 years ago
rudyy

rrElite Veteran

E. Amherst, NY

MyPosts All Forum Topic
Mark might be able to find out.
SHARE  PM  EMAIL  GALLERY  Attn:RR
06-19-2009 03:07 PM  11 years ago
Simtech

rrNovice

Philadelphia, PA - USA

MyPosts All Forum Topic
Diffferent logins belong to my flying buddies and my son (with their permission - actually they are loggin in for me). I never had an account before so they let me use theirs for buying for a while and learning RR - no biggie. Just recently I decided to register my own then I got screwed for being a RR newbie. Live and learn right? I hope that clear it out to some. (fault finders?)
SHARE  PM  EMAIL  Attn:RR
06-19-2009 03:12 PM  11 years ago
T Koffler

rrVeteran

Cayuga, NY 13034

MyPosts All Forum Topic
The last two pics look like something is on the root. It does not look smooth like the ones with the spacer installed. I don't think it matters if you are a new guy or key veteran. Right is right and wrong is wrong no matter what your status..
SHARE  PM  EMAIL  GALLERY  Attn:RR
06-19-2009 03:18 PM  11 years ago
JimmyC

rrApprentice

...

MyPosts All Forum Topic
Guys, just figured it out. I checked my paypal where the money was sent from for the receiver Simtech purchased from me and this came up.
MannyL@a-tech-inc.com

I then looked up MannyLalo on RR, and the address is where I shipped the receiver, Levittown, PA 19057

You be the judge .
SHARE  PM  EMAIL  GALLERY  Attn:RR
06-19-2009 03:18 PM  11 years ago
Simtech

rrNovice

Philadelphia, PA - USA

MyPosts All Forum Topic
The smoother blade picture has 2 spacers I put in while the rough one has no spacer.
SHARE  PM  EMAIL  Attn:RR
06-19-2009 03:19 PM  11 years ago
GyroFreak

rrProfessor

Orlando Florida ...28N 81W

MyPosts All Forum Topic
Looks like the root was sanded down, ex posing the fiber weave. Wish the original pictures showed the roots clearly for comparison.I think about the hereafter. I go somewhere to get something, then wonder what I'm here after ?
SHARE  PM  EMAIL  GALLERY  Attn:RR
06-19-2009 03:23 PM  11 years ago
rudyy

rrElite Veteran

E. Amherst, NY

MyPosts All Forum Topic
There is a nick about an inch from the root. I check back the picture provided by JimmyC and I do not quite see the nick. It looks like the sender's and buyer's pictures are not matching.
SHARE  PM  EMAIL  GALLERY  Attn:RR
06-19-2009 03:24 PM  11 years ago
GyroFreak

rrProfessor

Orlando Florida ...28N 81W

MyPosts All Forum Topic
and this came up.
MannyL@a-tech-inc.com
WOW !
Are you serious ?
I think about the hereafter. I go somewhere to get something, then wonder what I'm here after ?
SHARE  PM  EMAIL  GALLERY  Attn:RR
06-19-2009 03:31 PM  11 years ago
Simtech

rrNovice

Philadelphia, PA - USA

MyPosts All Forum Topic
He really hide it pretty well which made me think it's a perpect blade and fell for it. My pictures are under a light with high resolution so you can see.

I'll take a picture of what you want me to see while I still have the heli. Which part of the blade you want?
SHARE  PM  EMAIL  Attn:RR
06-19-2009 03:39 PM  11 years ago
what_the_helli

rrKey Veteran

cookeville, tn USA

MyPosts All Forum Topic
Guys, just figured it out. I checked my paypal where the money was sent from for the receiver Simtech purchased from me and this came up.
MannyL@a-tech-inc.com

I then looked up MannyLalo on RR, and the address is where I shipped the receiver, Levittown, PA 19057
your kidding, right?
I put the fun in dysFUNctional :)
Team KBDD & Funding by TnPrintMasters.com
SHARE  PM  EMAIL  GALLERY  Attn:RR
06-19-2009 03:39 PM  11 years ago
USNAviationjay

rrElite Veteran

Houston Tx USA

MyPosts All Forum Topic
If that's the paypal then this guy is already a crook...

haha.. another Manny Lalo alt ego.. when are you going to give up?..

sit and rot with those blades Manny.
enjoy.
SHARE  PM  EMAIL  GALLERY  Attn:RR
06-19-2009 03:56 PM  11 years ago
rudyy

rrElite Veteran

E. Amherst, NY

MyPosts All Forum Topic
What is so famous for Manny Lalo? Any background information?
SHARE  PM  EMAIL  GALLERY  Attn:RR
WATCH
 5 pages [ <<    <     2      3     ( 4 )     5     NEXT    >> ] 4332 views Topic Closed
Home🏬 Classifieds✈️Aircraft🚁Helicopter🏬Classifieds - Miscellaneous Sold  V-BLADES I HAVE BEEN SCAMMED
Print TOPIC

 11  Topic Subscribe

Classifieds › HELP-FAQ
Attention Buyers! To receive feedback Post Reply in the seller’s topic. The seller can then click your post's Add Classified Feedback link.
Attention Sellers! Stating price is not mandatory but recommended. Post Reply commentary that interferes with the selling process (and not replied to) will be removed upon request. Click Attn:RR on the offending classified post. Repeated NIB-NIP sales are not allowed. Take it to EBay.
Buyer Beware! RunRyder cannot vouch for any seller's or buyer's credibility and will not accept responsibility for any transactions resulting from the use of this site.

Wednesday, January 27 - 5:08 pm - Copyright © 2000-2021 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online