RunRyder RC
WATCH
 1 page 1331 views Post Reply
Home✈️Aircraft🚁HelicopterKasama Srimok 90 › Spindle Kasama Head
06-15-2009 11:14 PM  11 years ago
Topic Vote0Post 1
AreA51tje

rrApprentice

Murcia, Spain

MyPosts All Forum Topic
Spindle Kasama Head
Hi Guys,
Think I am one of the lucky guys, just assembled my head, screw the blade grips on and ¨crack¨ the screw just snapped

Did it happend to some one before?

Anyone know where to get it in Europe so that I can order before the weekend!!

Thanks in advance!
Dave

SHARE  PM  EMAIL  HOMEPAGE  Attn:RR  Quote
06-16-2009 12:48 AM  11 years ago
tchavei

rrProfessor

Portugal

MyPosts All Forum Topic
you're lucky indeed. Rather on the bench than in mid flight while doing tic tocs 3 feet from your face.

Can't you bore out the remaining screw without touching the spindle threads? You don't have nothing to loose I guess. Anyway, in europe I know these stores that have kasama parts, you should contact them if they can help

Realraptors (Uk)
Midlandhelicopters (Uk)
RcMarket (Belgium)

They all have/had the Srimok so I guess someone will have parts for it.

Good Luck

Tony

--------------------
"Perfection and patience usually walk side by side..."
SHARE  PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
06-16-2009 01:08 AM  11 years ago
GMPheli

rrElite Veteran

W. Bridgewater, MA USA

MyPosts All Forum Topic
How tight did you tighten it? Did you really sock it down? This is a very scary thing. Is this a 5 or 4 mm bolt?
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
06-16-2009 01:49 AM  11 years ago
Edvard R

rrNovice

Taiwan

MyPosts All Forum Topic
Dave,

Try putting the spindle in the oven for 15 minutes at 220 degrees or so. Should loosen up the screw so it would be easy to screw out.
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
06-16-2009 05:05 AM  11 years ago
TmMugen

rrKey Veteran

Tiny Little Red Dot aka Singapore

MyPosts All Forum Topic
WOW..Freaking scary..!! Did you use your bull strength to turn the screws?
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
06-17-2009 07:12 AM  11 years ago
AreA51tje

rrApprentice

Murcia, Spain

MyPosts All Forum Topic
Hi Guys, no bull strenght used at all, was just tightning them up and then it snapped.

Thomas Kreuzberger has send me some spare spindles, Thanks mate! hope to have it up and flying by this weekend.

Greets, Dave
SHARE  PM  EMAIL  HOMEPAGE  Attn:RR  Quote
WATCH
 1 page 1331 views Post Reply
Home✈️Aircraft🚁HelicopterKasama Srimok 90 › Spindle Kasama Head
Print TOPIC

 4  Topic Subscribe

Friday, January 22 - 5:40 am - Copyright © 2000-2021 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online