RunRyder RC
WATCH
 1 page 421 views POST REPLY
HomeAircraftHelicopterAudacity Models P6 Pantera - Tiger 50 › See Saw Arm Hole Selction ??
06-08-2009 02:15 AM  9 years agoPost 1
Hate_To_Crash

rrApprentice

Near Lake Tahoe

My Posts: All  Forum  Topic

And yes I searched before posting..

Now on the lower washout arms I do know the outer hole for 3D and the inner hole for stability

But what about the upper see saw arms? I looked here and Googled it and looked in the manual.

Call me blind, but I could not find the inner/outer does what to handling??

Help anyone??

PM  EMAIL  GALLERY  Attn:RR  Quote
06-08-2009 02:22 AM  9 years agoPost 2
petmotel

rrKey Veteran

DeKalb, IL.

My Posts: All  Forum  Topic

Page 27
Tuning Tip: The seesaw arms may be
mounted in one of two holes, inboard, or
closer to the center of the main shaft's
rotation, or outboard, closer to the fl ybar
paddles. The outer mounting hole results in
a 1:1 Bell Hiller mixing ratio. Use these for
smoother fl ight. The inner holes result in a
0.7:1 Bell-Hiller mixing ratio and are where
you mount the arms for aggressive 3D fl ight.

Jay

PM  EMAIL  HOMEPAGE  Attn:RR  Quote
06-08-2009 02:28 AM  9 years agoPost 3
Hate_To_Crash

rrApprentice

Near Lake Tahoe

My Posts: All  Forum  Topic

Yes read that.. But on the arms themselves there are 3 holes on the side to goes down to the swash.

What hole effects the head in what way??

But thank you for the quick response..

Mike

PM  EMAIL  GALLERY  Attn:RR  Quote
06-08-2009 02:54 AM  9 years agoPost 4
petmotel

rrKey Veteran

DeKalb, IL.

My Posts: All  Forum  Topic

As you move the ball closer to the main shaft, it increases both cyclic, and collective. Quite noticeably I might add!

Jay

PM  EMAIL  HOMEPAGE  Attn:RR  Quote
06-08-2009 03:43 AM  9 years agoPost 5
Hate_To_Crash

rrApprentice

Near Lake Tahoe

My Posts: All  Forum  Topic

Thank you.. I was staring at it and was about to come to that conclusion.

This will lead to the next question..

Who runs what holes and where??

Thanks again
Mike

PM  EMAIL  GALLERY  Attn:RR  Quote
WATCH
 1 page 421 views POST REPLY
HomeAircraftHelicopterAudacity Models P6 Pantera - Tiger 50 › See Saw Arm Hole Selction ??
 Print TOPIC  Make Suggestion 

 0  Topic Subscribe

Tuesday, August 21 - 3:17 am - Copyright © 2000-2018 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online