RunRyder RC
WATCH
 1 page 659 views POST REPLY
HomeAircraftHelicopterMain Discussion › 660 blades
06-07-2009 05:50 PM  9 years agoPost 1
Aaron29

rrProfessor

USA

My Posts: All  Forum  Topic

For those pilots like me who still enjoy their old 60 size engines...where on earth do you find your blades? Seems everywhere has 600's and then 690's. Nothing in between.

Any insights where I can buy some 660 rotorblades?

PM  EMAIL  GALLERY  Attn:RR  Quote
06-07-2009 07:11 PM  9 years agoPost 2
Gyronut

rrProfessor

Martinsville In.

My Posts: All  Forum  Topic

Try MTA...........

Rick

PM  EMAIL  GALLERY  Attn:RR  Quote
06-07-2009 08:02 PM  9 years agoPost 3
Furious Predator

rrProfessor

Kitchener, Ontario, Canada

My Posts: All  Forum  Topic

Funkey makes 660 and 680 glass blades. i have a set of the 600mm blades for my 50. they run real well. they are a perfect sport blade, and auto real well.

http://www.centuryheli.com/products...m?currentid=485

here is a link to some 60 size woodies
http://www.centuryheli.com/products...m?currentid=192

Shawn
Team Leisure-Tech
Team HelixRC

PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
06-07-2009 10:09 PM  9 years agoPost 4
reddragon

rrElite Veteran

Brooklyn, N.Y.

My Posts: All  Forum  Topic

PM  EMAIL  GALLERY  Attn:RR  Quote
06-07-2009 11:00 PM  9 years agoPost 5
RotorTech321

rrApprentice

Scranton, PA. USA

My Posts: All  Forum  Topic

Maybe in your area its dead, not mine!

PM  EMAIL  Attn:RR  Quote
06-07-2009 11:14 PM  9 years agoPost 6
reddragon

rrElite Veteran

Brooklyn, N.Y.

My Posts: All  Forum  Topic

LOL

PM  EMAIL  GALLERY  Attn:RR  Quote
06-08-2009 05:00 AM  9 years agoPost 7
Aaron29

rrProfessor

USA

My Posts: All  Forum  Topic

I just picked up SAB0220's.

They are 680mm and wide chord. I think this YS61 will be taxed spinning these blades around.

When I posted I was kind of hoping to find V-blades, SAB's, MAH's, Rotortechs and the other "big" blade manufacturers. So I'll be skipping detention.

PM  EMAIL  GALLERY  Attn:RR  Quote
09-06-2009 10:50 PM  8 years agoPost 8
Aaron29

rrProfessor

USA

My Posts: All  Forum  Topic

OK this has come up again due to running out of gas while in a piroflip...oops

The 680's indeed ran poorly on my Freya. The YS61 was not able to run more than about 8 degrees max pitch. It needs smaller blades, like 660.

I've been doing "homework" and coming up dry. And the links above are mainly 680's and are off brands.

Anyone know where to find 660mm symmetrical blades by SAB, V-Blades, Rotortech, or the like?

PM  EMAIL  GALLERY  Attn:RR  Quote
09-07-2009 01:23 AM  8 years agoPost 9
Sonic88

rrVeteran

Murfreesboro, TN

My Posts: All  Forum  Topic

What about these? They 665 SWEs.
http://www.helidirect.com/advanced_...20&inc_subcat=1

Procrastinators of the world unite ... tomorrow.
AMA #: 912822

PM  EMAIL  GALLERY  Attn:RR  Quote
09-07-2009 08:06 AM  8 years agoPost 10
Aaron29

rrProfessor

USA

My Posts: All  Forum  Topic

Well, the length seems right, but they say semisymmetrical. I'd like to go with a symmetrical blade for good sport/3D performance.

PM  EMAIL  GALLERY  Attn:RR  Quote
09-07-2009 01:55 PM  8 years agoPost 11
GMPheli

rrElite Veteran

W. Bridgewater, MA USA

My Posts: All  Forum  Topic

http://us.vario-helicopter.biz/shop...oducts_id=33454

They are left hand rotation, but are symetrical so you can run them upside down

They have these also, I am not a purple fan

http://us.vario-helicopter.biz/shop...oducts_id=32668

PM  EMAIL  GALLERY  Attn:RR  Quote
WATCH
 1 page 659 views POST REPLY
HomeAircraftHelicopterMain Discussion › 660 blades
 Print TOPIC  Make Suggestion 

 3  Topic Subscribe

Sunday, July 22 - 5:55 pm - Copyright © 2000-2018 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online