RunRyder RC
WATCH
 1 page 1648 views POST REPLY
HomeAircraftHelicopterRadio - Spektrum DSM › Tips for DX7- AR7100R Set-up!!!!
06-03-2009 05:25 AM  9 years agoPost 1
creepin

rrNovice

louisville, ky

My Posts: All  Forum  Topic

I'm updating my Raptor Titan from a trainer to something that can handle 3D. For starters I'm pulling out my ar7000 and putting in the AR7100R. I'm going with a 6v 2150NiMH spektrem battery. Anyways, while I'm double checking my linkages and saving up for servos and a metal head, I thought that any of you DX7 user who have installed an AR7100R could share some set-up tips.

PM  EMAIL  Attn:RR  Quote
06-03-2009 07:11 AM  9 years agoPost 2
f penfold

rrKey Veteran

uk

My Posts: All  Forum  Topic

if its on a 50 you will have to make sure that the sensor is touching the back plate I had to make the adjustment holes longer so i could do this . other than that its easy i run all my servos direct except gyro and tail. start off at about 70 on the gear channel and tach it from there. works well I have two now and need another three.

I know I used lock tight why did my head explode

PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
06-03-2009 02:34 PM  9 years agoPost 3
cbflys

rrVeteran

Nesconset, NY - USA

My Posts: All  Forum  Topic

PM  EMAIL  GALLERY  Attn:RR  Quote
WATCH
 1 page 1648 views POST REPLY
HomeAircraftHelicopterRadio - Spektrum DSM › Tips for DX7- AR7100R Set-up!!!!
 Print TOPIC  Make Suggestion 

 2  Topic Subscribe

Tuesday, July 17 - 12:57 pm - Copyright © 2000-2018 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online