RunRyder RC
WATCH
 1 page 1222 views POST REPLY
HomeAircraftHelicopter
e-
Minicopter
Other › Hyperions in battery bay - do not fit right
06-03-2009 05:02 AM  9 years agoPost 1
Evil VV

rrNovice

Ottawa, Ontario - Canada

My Posts: All  Forum  Topic

Hey guys !

I have been using Joker 2 for AP for a year now. I had 2*6s5000mh TP batteries for it.
They are gone to battery heaven and now i have purchuased 2*6s5000mh Hyperion CX batts.
They are nice battery but they are about .5 of cm taller then TPs and now they do not fit nice at all inside battery bay in Joker2.

How do you get .5 of cm more in height? Please help!

WIth velcro on them there is very little space left, i had very hard time getting them out once i put them in there.

PM  EMAIL  Attn:RR  Quote
06-07-2009 05:53 AM  9 years agoPost 2
Evil VV

rrNovice

Ottawa, Ontario - Canada

My Posts: All  Forum  Topic

The simple fix was - flip the battery tray upside down.
Lots of room now.

PM  EMAIL  Attn:RR  Quote
06-17-2009 06:32 PM  9 years agoPost 3
andyman_sf

rrApprentice

San Francisco, CA - USA

My Posts: All  Forum  Topic

just wanted to add that the clearance I got from flipping the tray gives me 80mm x 59mm roughly in clearance. Hoping to squeeze a TP 6600 6S prolite v2 with dimensions 76x43x140

PM  EMAIL  GALLERY  Attn:RR  Quote
07-09-2009 09:05 PM  9 years agoPost 4
bmichels

rrNovice

belgium

My Posts: All  Forum  Topic

fliping the battery tray upside down gives 80mm x 59mm on a Joker 2.

Do you know what this "fliping" will give on a MaxiJoker 3' Battery tray ?

thanks

PM  EMAIL  Attn:RR  Quote
07-09-2009 11:59 PM  9 years agoPost 5
GerdrrVeteran - Vellmar/Germany - My Posts: All  Forum  Topic

Here are all the currently availbale battery trays, 55mm (Joker3 stock), 70 mm (Maxi-Joker3 stock) and 95 mm height.

PM  EMAIL  GALLERY  Attn:RR  Quote
07-11-2009 06:24 AM  9 years agoPost 6
Evil VV

rrNovice

Ottawa, Ontario - Canada

My Posts: All  Forum  Topic

And they can be used on Joker2 as well?

PM  EMAIL  Attn:RR  Quote
07-11-2009 07:56 AM  9 years agoPost 7
Gerd

rrVeteran

Vellmar/Germany

My Posts: All  Forum  Topic

No, they do not fit on Joker 2. We have these 95 mm also for Maxi-Joker 2, but first you should turn the bottom plate, then you win about 7 mm.
But then you should mount the side mounting screws of the profiles from the inside and use lense screws. Also you must add chamfers for the countersunk screws from the other side. If you like I can send you the material which is stock 20 mm high and you bore the holes for yourself.

PM  EMAIL  GALLERY  Attn:RR  Quote
07-11-2009 08:30 AM  9 years agoPost 8
Seablade

rrKey Veteran

earth

My Posts: All  Forum  Topic

Gerd, what are the part numbers for those frames? thanks.

"Vini, Vidi, Velcro"

PM  EMAIL  GALLERY  Attn:RR  Quote
07-11-2009 11:56 PM  9 years agoPost 9
Gerd

rrVeteran

Vellmar/Germany

My Posts: All  Forum  Topic

95 mm for Maxi-Joker 2 #725
95 mm for Maxi-Joker 3 #338

PM  EMAIL  GALLERY  Attn:RR  Quote
07-13-2009 01:22 PM  9 years agoPost 10
Evil VV

rrNovice

Ottawa, Ontario - Canada

My Posts: All  Forum  Topic

Thank you for the offfer Gerd

I fliped the bottom plate and drilled my own holes. All is good now.
Hyperions 5000mh 6s fit perfectly.
I was just curious about those 95 mm battery trays beacuse i was considering buying bigger capacity batteries such as 6600mh 6s X2.

Thanx again

VV

PM  EMAIL  Attn:RR  Quote
08-28-2009 08:46 PM  8 years agoPost 11
davejoyce2000

rrNovice

USA

My Posts: All  Forum  Topic

95 mm battery tray for MJ3
Gerd, does the left and right frame of 95 mm battery tray for MJ3 have the same part #338?

PM  EMAIL  Attn:RR  Quote
WATCH
 1 page 1222 views POST REPLY
HomeAircraftHelicopter
e-
Minicopter
Other › Hyperions in battery bay - do not fit right
 Print TOPIC  Make Suggestion 

 3  Topic Subscribe

Sunday, August 19 - 8:30 pm - Copyright © 2000-2018 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online