RunRyder RC
WATCH
 28 pages [ <<    <     7      8     ( 9 )     10      11     NEXT    >> ] 62733 views Topic Closed
Home✈️Aircraft🚁HelicopterKasama Srimok 90 › Post your Kasama Srimok 90 Build Pics, Ideas, Tips and etc HERE..Proudly Made In Thailand :)
06-20-2009 02:54 AM  11 years ago
TmMugen

rrKey Veteran

Tiny Little Red Dot aka Singapore

MyPosts All Forum Topic
1. check rudder control rod guide before each flight. if sliding persist, apply CA. if radial rotation occurs, tail control will be affected.

Git, can you take a pics to show us where this part is affecting?
SHARE  PM  EMAIL  GALLERY  Attn:RR
06-20-2009 03:18 AM  11 years ago
bathmagic

rrVeteran

Berwick,Victoria, Australia

MyPosts All Forum Topic
Git

I have not used a Skookum unit yet i use V-stabi.

BUT i noticed in yoru pictures on the skookum unit it says

"this is the FRONT of the unit"

and its turned to the side on yours ???

Is that correct orientaion of the skookum unit ?

if it has to be at the front your skookum unit would be confused with alieron and elevator cyclics, is that not correct ?

Dale
ENV - Still laying it down !….Ohhh yeh !!!
SHARE  PM  EMAIL  HOMEPAGE  Attn:RR
06-20-2009 04:44 AM  11 years ago
Regie

rrApprentice

Manila, Philippines

MyPosts All Forum Topic
Looks nice! What's the weight without fuel but with blades and a blade transport holder?
SHARE  PM  EMAIL  GALLERY  Attn:RR
06-20-2009 04:47 AM  11 years ago
TmMugen

rrKey Veteran

Tiny Little Red Dot aka Singapore

MyPosts All Forum Topic
Guys:

I got a note from Mr. Kasama that for the first time starting the engine, please have your engine idle at lowest possible..This is only for the first time starting..
SHARE  PM  EMAIL  GALLERY  Attn:RR
06-20-2009 04:50 AM  11 years ago
TmMugen

rrKey Veteran

Tiny Little Red Dot aka Singapore

MyPosts All Forum Topic
Regie:

Not very sure about the exact weight..But I "handcarry" a trex700 and a Srimok90. I am very surprised that they are about the same, in fact the srimok90 seems lighter as commented by one of the flyers.

In reality, Srimok90 looks like a beefed up 50 size..Very compact!! I am going to get a weighing machine this weekend and I WILL weigh this bugger..
SHARE  PM  EMAIL  GALLERY  Attn:RR
06-20-2009 08:50 AM  11 years ago
Git

rrVeteran - Brunei MyPosts All  Forum  Topic

rudder control guide
tm mugen: mine did not slide.. but the teflon tubing did..so i CA'd it to the guide. just a sneak peek.. i added a tail boom bridge

bling rapt: yes it's original from KSM.. my mixture servo plate/mount was in my kit. not sure if it was a free gift or not from the guru.

bathmagic: yes, but you can program the sensors.. the skookum can be placed inverted as well. anywhere along the centreline of the heli..

anyways, i got to go fly it again.. cheerio.. happy building
Alees Rush 750
SHARE  PM  EMAIL  GALLERY  Attn:RR
06-20-2009 11:30 AM  11 years ago
Regie

rrApprentice

Manila, Philippines

MyPosts All Forum Topic
TmMugen, thanks! I will wait for the weight.
SHARE  PM  EMAIL  GALLERY  Attn:RR
06-20-2009 01:50 PM  11 years ago
bathmagic

rrVeteran

Berwick,Victoria, Australia

MyPosts All Forum Topic
Tm Mugen

i understand about the start up comment

Im sure its because the tolerance on the clutch is tight

I started with a real low throttle position and keep bringing it up until the motor would run against the drag it had on the clutch

after 2 flights is was fine

a low idle and it "Just" drags on the blades, its loosening up the more i fly it.

when i built the clutch i remember cutting it out of the bag it comes in and thinking " that smells of rubber"
maybe the material of the liner is differnet from other machines

did anyone else notice that too ?

Dale
ENV - Still laying it down !….Ohhh yeh !!!
SHARE  PM  EMAIL  HOMEPAGE  Attn:RR
06-20-2009 01:52 PM  11 years ago
bathmagic

rrVeteran

Berwick,Victoria, Australia

MyPosts All Forum Topic
blades and padels, Unpainted canopy, No fuel, ready to fly weight 4225 gramsENV - Still laying it down !….Ohhh yeh !!!
SHARE  PM  EMAIL  HOMEPAGE  Attn:RR
06-20-2009 02:16 PM  11 years ago
Ghostrider

rrElite Veteran

San Diego, CA

MyPosts All Forum Topic
blades and padels, Unpainted canopy, No fuel, ready to fly weight 4225 grams
Or 9.31 lbs for those of us on this side.
SHARE  PM  EMAIL  GALLERY  Attn:RR
06-20-2009 02:26 PM  11 years ago
bathmagic

rrVeteran

Berwick,Victoria, Australia

MyPosts All Forum Topic
Thanks Ghostrider

Dale
ENV - Still laying it down !….Ohhh yeh !!!
SHARE  PM  EMAIL  HOMEPAGE  Attn:RR
06-20-2009 02:50 PM  11 years ago
TmMugen

rrKey Veteran

Tiny Little Red Dot aka Singapore

MyPosts All Forum Topic
Bathmagic:

How did you get that telfon sleeve into the rod?
SHARE  PM  EMAIL  GALLERY  Attn:RR
06-20-2009 03:03 PM  11 years ago
TmMugen

rrKey Veteran - Tiny Little Red Dot aka Singapore MyPosts All  Forum  Topic

Kasama Srimok 90. Serial number: 0900131 reporting for maiden flight..!! Not mine though.

Starting the YS91SR is smooth like butter. With advice from KSM, we start with low idle for safety..Spool up the head speed and it is bloodily smooth..!! No bubbling from the tank is noticed..During idle, the Srimok 90 is obviously vibrating lesser than my trex700..The sound from the Srimok 90 is music to ears One comment from my friend flying it: "the Srimok 90 feels light even during running in the engine"

Sorry guys, no video as I do not know how to post video. Some pics for you guys. It is like smoking out the mosquito. LOL, But few more days, I think my friend will wack the hell out of this bugger.

SHARE  PM  EMAIL  GALLERY  Attn:RR
06-20-2009 03:48 PM  11 years ago
TmMugen

rrKey Veteran - Tiny Little Red Dot aka Singapore MyPosts All  Forum  Topic

OK guys..!! THIS IS THE FREAKING HIGHLIGHTsss….!! The torque tube for KSM Srimok 90 is 7075-T9..!! Do a search in Goggle and you will know..KSM Srimok 90 actually uses an Archery shaft for it’s torque tube..!!!!

Easton XX75 Camo Hunter utilizes Easton's 7075-T9 aluminum which has been the standard in durability for decades.

Some basic specs if you are interested:

Alloy/Material - 7075-T9 Aluminum
Nock Type - Conventional Nock
Color/Pattern - 4 Tone Black, Brown, Dark Green and Light Green Camo
Straightness - +/- 002"

SHARE  PM  EMAIL  GALLERY  Attn:RR
06-20-2009 05:10 PM  11 years ago
uk sailor

rrApprentice

UK

MyPosts All Forum Topic
hmmm the model doesn't look much like a "cam bow" when it's finished but let us know how she shoots when your done
SHARE  PM  EMAIL  Attn:RR
06-20-2009 08:22 PM  11 years ago
eckman

rrApprentice - Hull, ENGLAND MyPosts All  Forum  Topic

my canopy done. what you think my paint job?

ready to fly now!!!!
KASAMA SRIMOK90, KASAMA SRIMOK CYBER, T-REX700 WITH KASAMA UPGREAD, ADK Flybarless Conversion.
SHARE  PM  EMAIL  Attn:RR
06-20-2009 08:30 PM  11 years ago
Ghostrider

rrElite Veteran

San Diego, CA

MyPosts All Forum Topic
Very nice!
SHARE  PM  EMAIL  GALLERY  Attn:RR
06-21-2009 01:37 AM  11 years ago
rexxigpilot

rrProfessor

rexxig2@comcast.net

MyPosts All Forum Topic
It would seem I already have 2 dozen spare torque tubes in my quivers! I use 2018 Easton camo hunter arrows. Smart move on Mr. Kasama's part to cut cost.
SHARE  PM  EMAIL  GALLERY  Attn:RR
06-21-2009 01:59 AM  11 years ago
dan-uk

rrApprentice

Bath, England

MyPosts All Forum Topic
Excellent paint job!!!
SHARE  PM  EMAIL  GALLERY  Attn:RR
06-21-2009 02:29 AM  11 years ago
TmMugen

rrKey Veteran

Tiny Little Red Dot aka Singapore

MyPosts All Forum Topic
eckman, very nice paint scheme..what kind of paint and clear coat you use? Seems very clear and shinny..!! Excellent.
SHARE  PM  EMAIL  GALLERY  Attn:RR
WATCH
 28 pages [ <<    <     7      8     ( 9 )     10      11     NEXT    >> ] 62733 views Topic Closed
Home✈️Aircraft🚁HelicopterKasama Srimok 90 › Post your Kasama Srimok 90 Build Pics, Ideas, Tips and etc HERE..Proudly Made In Thailand :)
Print TOPIC

 46  Topic Subscribe

Thursday, January 28 - 9:32 am - Copyright © 2000-2021 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online