RunRyder RC
WATCH
 2 pages [ <<    <     1     ( 2 )    >    >> ] 4575 views POST REPLY
HomeAircraftHelicopterRadio - Servo - Gyro - Gov - Batt › gy520 not holding
06-04-2009 02:25 PM  9 years agoPost 21
Dr.Ben

rrMaster

Richmond, VA, USA

My Posts: All  Forum  Topic

TGO,

Clintstone is correct. Either the speed menu in the ATV menu or speed function in the AFR menu in the MZ will both soften stops. We've done this dating all the way back to the 9Z and the GY501 (p35 of the GY501 manual). It does more than give an expo effect. It effectively mimics the delays found in the menu of the GY601/611 which are specifically targeted to adjust the agressiveness of stops and suppress any bounce. In the case of the MZ's speed function in the Rudder AFR menu where you can pace return of stick/servo to center sep. from movement away from center, it will exactly duplicate the delay function.

Ben Minor

Peak Aircraft/Team Minicopter Team Futaba Team Kontronik USA

PM  EMAIL  GALLERY  Attn:RR  Quote
06-04-2009 04:36 PM  9 years agoPost 22
Clintstone

rrVeteran

GA

My Posts: All  Forum  Topic

Very good explination Ben.

PM  EMAIL  GALLERY  Attn:RR  Quote
WATCH
 2 pages [ <<    <     1     ( 2 )    >    >> ] 4575 views POST REPLY
HomeAircraftHelicopterRadio - Servo - Gyro - Gov - Batt › gy520 not holding
 Print TOPIC  Make Suggestion 

 6  Topic Subscribe

Thursday, August 16 - 5:03 pm - Copyright © 2000-2018 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online