RunRyder RC
WATCH
 1 page 446 views POST REPLY
HomeRC & Power✈️Aircraft🚁Helicoptere-Electric Motors-Controllers-ESCOther › ESC and Throttle channel settings..
04-27-2009 03:46 AM  10 years ago
Topic Vote0Post 1
Chuck Bole

rrElite Veteran

Tulsa Ok. U.S.A.

MyPosts All Forum Topic
ESC and Throttle channel settings..
I'm running two speed controllers on my heli. 1 for the main motor on the rotorhead, this is controlled by the normal Throttle channel.
The other 1 is powering the tail rotor and controlled by Aux2 wich is slaved to Aux3. (So i can use a slide on the side of the TX.) My question is.. Aux 2 and Aux 3 do not have a regular throttle curve.
So i set the top end of the channel to say 80% output when the master channel is at 100%.. So am i using gov mode? I do have the ESC set to gov mode. (Kontronics 80-6-18) It does seem to hold a steady rpm for most of the flight, but if you hammer the tail hard it will sag after apx 3 min..
chuck
thanks
chuck
Team Synergy Field Representative / Scorpion / Thunder Power
SHARE  PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
WATCH
 1 page 446 views POST REPLY
HomeRC & Power✈️Aircraft🚁Helicoptere-Electric Motors-Controllers-ESCOther › ESC and Throttle channel settings..
 Print TOPIC  Make Suggestion 

 1  Topic Subscribe

Thursday, October 24 - 7:03 am - Copyright © 2000-2019 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online