RunRyder RC
WATCH
 2 pages [ <<    <    ( 1 )     2     NEXT    >> ] 2139 views POST REPLY
Home✈️Aircraft🚁Helicoptere-BladeBlade CP Pro › Backordered parts for CP Pro2
04-27-2009 02:09 AM  10 years ago
Topic Vote0Post 1
Lwnemesis

rrVeteran

Seattle, WA

MyPosts All Forum Topic
Backordered parts for CP Pro2
Hi Guys,

I am converting my CP Pro to a Pro 2 and I ordered parts from horizon. They only had the ESC and tail motor heatsink in stock. The main and tail motors, prop and tail components are backordered. Did anyone order this stuff from Horizon? if so, how long did it take you to get them?
SHARE  PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
05-18-2009 06:45 PM  10 years ago
Lwnemesis

rrVeteran

Seattle, WA

MyPosts All Forum Topic
Bump Partless in Seattle
SHARE  PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
05-19-2009 07:02 PM  10 years ago
Mitchilito

rrVeteran

Morehead City, NC USA

MyPosts All Forum Topic
Nemesis,
It's crazy isn't it? EFlight comes out with a heli and doesn't stock the parts for MONTHS.

I've been waiting for tailfins for several months. I finally gave up and ordered aftermarket ones from Helidirect.

Sheesh!
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
05-22-2009 10:08 AM  10 years ago
ch-47c

rrElite Veteran

san jose, ca

MyPosts All Forum Topic
I ordered a N60 tail motor from my LHS about Jan 09. I forgot about it as I found a GWS motor and prop as recommended in a RC Heli article. I finally recieved it in April.
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
05-22-2009 10:09 AM  10 years ago
ch-47c

rrElite Veteran

san jose, ca

MyPosts All Forum Topic
The LHS was a Hobbytown. I don't know who their supplier is, but I figured they sell a lot of micro-helis.
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
05-26-2009 11:32 PM  10 years ago
Gyronut

rrProfessor

Martinsville In.

MyPosts All Forum Topic
💎Sustaining Member
The N60 mtr for the Pro 2 is not the same as the GWS 50XC. The GWS is not rated for 3S operation.Rick
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
05-26-2009 11:52 PM  10 years ago
Lwnemesis

rrVeteran

Seattle, WA

MyPosts All Forum Topic
Yay, they finally got parts in stock and they are cheaper. They have the DD conversion for $14.99 on horizons website and the main motors are in stock. Funny how the individual parts are still out of stock.

Check out the links below:

[url=http://www.horizonhobby.com/Products/Default.aspx?ProdID=EFLH1320]
[url=http://www.horizonhobby.com/Products/Default.aspx?ProdID=EFLH1310]
SHARE  PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
05-30-2009 10:30 AM  10 years ago
ch-47c

rrElite Veteran

san jose, ca

MyPosts All Forum Topic
The N60 mtr for the Pro 2 is not the same as the GWS 50XC. The GWS is not rated for 3S operation.
I know they aren't the same.
ordered a N60 tail motor from my LHS about Jan 09. I forgot about it as I found a GWS motor and prop as recommended in a RC Heli article. I finally recieved it in April.
In RC Heli Issue #11 June/July 2007, RC Heli Hook Up Blade CP Pro with John Adams. Adams who has something to do with Specktrum radios and Horizon, did a modification to his Blade. I was tired of waiting for the N60 and found a GWS motor and prop for around $10 that was the exact same model that he used in the article and I installed it. Whether it is wrong or not, I don't care as he seems to be an expert and it flys great.
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
06-02-2009 03:46 AM  10 years ago
piranhafreak

rrVeteran

Manahawkin NJ

MyPosts All Forum Topic
i got rid of my blade cp pro 2 cause i couldnt find the tail prop for it really annoying as i love the heli just cant get partsMabey one day i will actually land one of these things !!
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
06-02-2009 10:29 PM  10 years ago
Mitchilito

rrVeteran

Morehead City, NC USA

MyPosts All Forum Topic
Outragous!
I feel your pain Paranah. I had to order the "conversion kit" Nemesis found just to have some spares in case I crash.

eFlight has REALLY dropped the ball. I keep wanting to write them a nasty-gram to tell them how cr*ppy this is but I don't know who to send it to!
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
06-02-2009 11:12 PM  10 years ago
Lwnemesis

rrVeteran

Seattle, WA

MyPosts All Forum Topic
the parts are out there. I have seen some of them at my LHS. Its just spotty shipping from china/taiwan or whereever this stuff is made.
SHARE  PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
06-02-2009 11:36 PM  10 years ago
Mitchilito

rrVeteran

Morehead City, NC USA

MyPosts All Forum Topic
What makes it even worse is: I LOVE the machine. It just works so great bone stock and cheap!

Darn it.
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
06-03-2009 09:30 AM  10 years ago
ch-47c

rrElite Veteran

san jose, ca

MyPosts All Forum Topic
Depending on your parts needs, some parts are interchangeable between the Blade CP and the CP Pro. I don't have a CP Pro2, but I'm sure some are still interchangeable. The main deference were the head and electronics.
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
06-03-2009 06:02 PM  10 years ago
Mitchilito

rrVeteran

Morehead City, NC USA

MyPosts All Forum Topic
You're right - the only difference is the tail group. Bad news if you crash.
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
06-03-2009 06:04 PM  10 years ago
Lwnemesis

rrVeteran

Seattle, WA

MyPosts All Forum Topic
Actually the head stayed the same. The electronics changed and the tail changed for the better but the main thing and this is what people are complaining about is these parts are hard to find.
SHARE  PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
06-05-2009 09:54 AM  10 years ago
ch-47c

rrElite Veteran

san jose, ca

MyPosts All Forum Topic
The Blade CP Pro head is not the same as the Blade CP. The head is different. The CP Pro 1 had Bell/Hiller mixers that made the head better that the original. The Blade CP Pro 2 maybe the same as the Blade CP, but as I said earlier, I don't know because I don't have that model at all. I just modified my CP Pro 1.
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
06-05-2009 02:48 PM  10 years ago
Mitchilito

rrVeteran

Morehead City, NC USA

MyPosts All Forum Topic
heads
CH-47, you are right, the PP Plus and CP Pro heads are different.

However, the old CP Pro and the new Pro V2 have the identical head with the Bell mixers.
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
06-07-2009 04:54 AM  10 years ago
ch-47c

rrElite Veteran

san jose, ca

MyPosts All Forum Topic
I see. In my parts bin I have an original CP head. It can be modified to be a CP Pro2? If that's the case, it will give me an option in the future.
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
06-07-2009 10:28 AM  10 years ago
Mitchilito

rrVeteran

Morehead City, NC USA

MyPosts All Forum Topic
Yes it can be modified: you'll need to buy the newer blade grips (which have a mount for the mixers buit in) and the mixers. You'll also need the bell links that go to the swashplate.

I think horizon sells an upgrade kit with all this stuff in it.
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
06-07-2009 10:30 AM  10 years ago
Mitchilito

rrVeteran

Morehead City, NC USA

MyPosts All Forum Topic
Thanks Lawnemesis!
I got my LHS to oreder the "tail upgrade" for me. Now I have a spare everything except tail fins.

Thanks Nemesis!!
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
WATCH
 2 pages [ <<    <    ( 1 )     2     NEXT    >> ] 2139 views POST REPLY
Home✈️Aircraft🚁Helicoptere-BladeBlade CP Pro › Backordered parts for CP Pro2
 Print TOPIC  Make Suggestion 

 2  Topic Subscribe

Friday, October 18 - 9:08 pm - Copyright © 2000-2019 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online