RunRyder RC
WATCH
 1 page 963 views POST REPLY
HomeRC & Power✈️Aircraft🚁HelicopterRadio - Spektrum DSM › Spektrum problem
04-27-2009 01:16 AM  10 years ago
Topic Vote0Post 1
Monkeyking

rrNovice

Argentina

MyPosts All Forum Topic
Spektrum problem
Hi to all

I bought a module for my Futaba 9CAP, the SPMMSFUT7.

Today I was turning on my TREX 600N and I saw that the led on the satellite of the RX was flashing... 5 sec on, 1 off, 15 sec. on, 1 off...

I read the manual but I didnt find any info about that.

I would like to know if you can help me with that, to know why it happened... I dont want to crash my heli for that!!

Hope you can help me!

Thanks,
Kind regards,
Mauro.-

SHARE  PM  EMAIL  Attn:RR  Quote
04-27-2009 01:32 AM  10 years ago
Twrecks600

rrKey Veteran

Round Rock, Texas

MyPosts All Forum Topic
Turn your receiver pack off and turn your transmitter off. Wait 10 secs. Turn your transmitter back on followed by your receiver pack and the light should be steady on.
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
04-27-2009 01:34 AM  10 years ago
LONEWOLF2440

rrElite Veteran

MYRTLE BEACH S.C

MyPosts All Forum Topic
what i would suggestMIKADO LOGO 600 TREX 550
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
04-27-2009 01:53 AM  10 years ago
Monkeyking

rrNovice

Argentina

MyPosts All Forum Topic
ok, I will try that.
But... why this happens?
Have I to re bind?

Thanks!
SHARE  PM  EMAIL  Attn:RR  Quote
04-27-2009 02:00 AM  10 years ago
Twrecks600

rrKey Veteran

Round Rock, Texas

MyPosts All Forum Topic
No, you don't have to rebind. Basically if you turn off the receiver and don't turn off the radio, the receiver thinks that is has had a loss of signal and the lights will flash.
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
04-27-2009 02:03 AM  10 years ago
R/C Speed Nut

rrVeteran

Galesburg, Michigan USA

MyPosts All Forum Topic
The newer RXs have a feature that causes them to slow blink after the RX has detected an interruption in power.
Mike

Funky Chicken?!!..........I thought this was how you do a piro flip!!
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
04-27-2009 02:34 AM  10 years ago
Monkeyking

rrNovice

Argentina

MyPosts All Forum Topic
I tried that... and nothing..
Now, the main RX is flashing a little too.

Is that normal?
SHARE  PM  EMAIL  Attn:RR  Quote
04-27-2009 02:49 AM  10 years ago
trevortraffic

rrNovice

southeast Florida

MyPosts All Forum Topic
Be sure that your transmiter is not too close to the receiver before switching on.
SHARE  PM  EMAIL  Attn:RR  Quote
04-27-2009 03:26 AM  10 years ago
Twrecks600

rrKey Veteran

Round Rock, Texas

MyPosts All Forum Topic
Try re-binding and then following the instructions that I gave you. If that doesn't work, you may have a bad receiver. Has it ever been in a crash??
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
04-27-2009 02:11 PM  10 years ago
dkshema

rrMaster

Cedar Rapids, IA

MyPosts All Forum Topic
Read this and see if it applies to your situation:

http://spektrumrc.com/Articles/Arti...?ArticleID=1855

And check the integrity of the connection in the cable between the main and the satellite receiver.
-----
Dave

* Making the World Better -- One Helicopter at a time! *

Team Heliproz
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
04-29-2009 12:26 AM  10 years ago
Monkeyking

rrNovice

Argentina

MyPosts All Forum Topic
trevortraffic: Be sure that your transmiter is not too close to the receiver before switching on.

That was my problem!!!!!!!!!
Thanks trevortraffic!!!!!!

SHARE  PM  EMAIL  Attn:RR  Quote
WATCH
 1 page 963 views POST REPLY
HomeRC & Power✈️Aircraft🚁HelicopterRadio - Spektrum DSM › Spektrum problem
 Print TOPIC  Make Suggestion 

 4  Topic Subscribe

Tuesday, October 22 - 4:54 am - Copyright © 2000-2019 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online