RunRyder RC
WATCH
 1 page 400 views POST REPLY
HomeRC & Power✈️Aircraft🚁HelicopterRadio - Servo - Gyro - Gov - Batt › 9303 and Solid G Gain settings, Trex 600 nitro,8700G
04-26-2009 11:33 PM  10 years ago
Topic Vote0Post 1
Irish886

rrApprentice

coventry RI

MyPosts All Forum Topic
9303 and Solid G Gain settings, Trex 600 nitro,8700G
I have a been trying to get the gain correct for my Trex and I was wondering what other people are using. I have been aroung 65 on the Gyro gain on the radio not the Gview. If I go to 70 or higher it starts to oscillate when I do a turn and throttle up. So I went lower with the gain but when I was flying with the wind at my side the tail wobbles. What are other people running for gain on the 9303?

Irish
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
04-26-2009 11:50 PM  10 years ago
baddynergy

rrElite Veteran

sierra madre, ca- usa

MyPosts All Forum Topic
65 sounds just about right. Mine is at 68. As long as it doesnt wag your good to go.**Unattended children will be givin a shot of espresso and a puppy**
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
04-27-2009 12:10 AM  10 years ago
Irish886

rrApprentice

coventry RI

MyPosts All Forum Topic
Ok thanks what have you got you ATV at? I have mine at 65 to try ans slow down the tail speed. I don't do much 3D and I want to get used to this Gyro before makeing it more sensitive.

Irish
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
04-27-2009 01:02 AM  10 years ago
baddynergy

rrElite Veteran

sierra madre, ca- usa

MyPosts All Forum Topic
My ATV for piros is 110. Its pretty fast..

Start low and work your way up. 65 should make for a slow piro.
**Unattended children will be givin a shot of espresso and a puppy**
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
04-27-2009 01:03 AM  10 years ago
Irish886

rrApprentice

coventry RI

MyPosts All Forum Topic
I guess !!! Well I will have to get used to the difference from a 401

Irish
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
04-27-2009 03:18 AM  10 years ago
Funky Trex

rrElite Veteran

Westerville, OH - USA

MyPosts All Forum Topic
My 600N is set for 69 in the gyro menu of my 9303. My rudder endpoints are 85 each direction. It has a good speed without being too fast for my style. Out of all of my helis with different gyro/servo combos, this one is my favorite.

BTW, I am running a BLS251... not sure how much difference that makes
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
04-27-2009 01:09 PM  10 years ago
Irish886

rrApprentice

coventry RI

MyPosts All Forum Topic
THanks for the replies. I guess I am close on my gain I just need to get used to the speed of the tail and stop moving my stics so much!!

Irish
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
04-28-2009 03:44 AM  10 years ago
Irish886

rrApprentice

coventry RI

MyPosts All Forum Topic
I went out tonight and I have the gain correct and the engine tuned but I get a kind of slow wobble as I decelerate. When in forward flight it seems ok but I see it again when coming out of a turn and start to accelerate the tail wobbles. I have richened and leaned out the engine so I know I have it right on or only off by one click. I increased the gain till it was oscillating then backed off and it is set to 65 on the 9303. I am using the 600N setiing in the gyro. Is something I am missing on setting the Gyro??

Irish
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
WATCH
 1 page 400 views POST REPLY
HomeRC & Power✈️Aircraft🚁HelicopterRadio - Servo - Gyro - Gov - Batt › 9303 and Solid G Gain settings, Trex 600 nitro,8700G
 Print TOPIC  Make Suggestion 

 1  Topic Subscribe

Thursday, September 19 - 2:11 pm - Copyright © 2000-2019 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online