RunRyder RC
WATCH
 1 page 404 views POST REPLY
HomeAircraftHelicopterJR Heli Vibe 90/50, Sylphide 90, GSR260 › Need quick measurement for Vibe 50
04-23-2009 12:36 AM  9 years agoPost 1
chopper_crazy

rrElite Veteran

Delphos, Ohio

My Posts: All  Forum  Topic

I am putting together a new Vibe 50 and I need a measurement from the flybar arm to the flybar paddle in MM. I am running super stubz but that shouldn't matter. Hopefully I get a quick answer as that is the step I am on. Thanks.

It's a complex, costly, glow powered anti-gravity machine!

PM  EMAIL  GALLERY  Attn:RR  Quote
04-23-2009 12:40 AM  9 years agoPost 2
ch-47c

rrElite Veteran

san jose, ca

My Posts: All  Forum  Topic

Page 29 Vibe manual: 177.5mm Flybar Arm to end of Flybar.

PM  EMAIL  GALLERY  Attn:RR  Quote
04-23-2009 02:37 AM  9 years agoPost 3
chopper_crazy

rrElite Veteran

Delphos, Ohio

My Posts: All  Forum  Topic

I see that and I have that part done. What about how far you thread the paddles on? I don't know how much flybar should be exposed once the paddles are on using super stubz. Thanks.

It's a complex, costly, glow powered anti-gravity machine!

PM  EMAIL  GALLERY  Attn:RR  Quote
04-23-2009 02:49 AM  9 years agoPost 4
AaronJohnson

rrElite Veteran

mason,MI

My Posts: All  Forum  Topic

Just thread the paddles on until they stop and then back them off just enough to position them properly. When you done, measure the distance and it should be the same.

PM  EMAIL  GALLERY  Attn:RR  Quote
04-23-2009 08:08 AM  9 years agoPost 5
Spacey

rrVeteran

Pretoria, South Africa

My Posts: All  Forum  Topic

The Superstubz instructions also give you a minimum they should be threaded on so you can check for safety. Just push them onto the flybar and before you start threadin mark where they are, measure the distance and make sure you screw them on further than this mark. Don't force them while turning.

PM  EMAIL  GALLERY  Attn:RR  Quote
04-23-2009 12:49 PM  9 years agoPost 6
ch-47c

rrElite Veteran

san jose, ca

My Posts: All  Forum  Topic

My bad I didn't read your post more thoroughly.

PM  EMAIL  GALLERY  Attn:RR  Quote
WATCH
 1 page 404 views POST REPLY
HomeAircraftHelicopterJR Heli Vibe 90/50, Sylphide 90, GSR260 › Need quick measurement for Vibe 50
 Print TOPIC  Make Suggestion 

 2  Topic Subscribe

Wednesday, October 17 - 11:50 pm - Copyright © 2000-2018 RunRyder   EMAILEnable Cookies

The RC discussion world needs to consolidate. RR is now one choice for that. Its software is cutting edge. It hosts on-topic advertising. Help RR increase traffic buy making suggestions, posting in RR's new areas (sites) and by spreading the word.

The RunRyder Difference

• Category system to allow Rep/Vendor postings.
• Classifieds with sold (hidden) category.
• Classifieds with separate view new.
• Answer PMs offsite via email reply.
• Member gallery photos with advanced scripting.
• Gallery photo viewer integrated into postings.
• Highly refined search with advanced back end.
• Hosts its own high end fast response servers.
• Hosts thousands of HD event coverage videos.
• Rewrote entire code base with latest technology.
• No off-topic (annoying) click bait advertising.
Login Here
 New Subscriptions 
 Buddies Online