RunRyder RC
WATCH
 1 page 1490 views POST REPLY
HomeAircraftHelicopter
e-
Blade
Blade 400 › 3D New servos on my Blade 400
04-22-2009 07:38 AM  9 years agoPost 1
Buildem336

rrNovice

Vista Ca

My Posts: All  Forum  Topic

I tried these Ds450 servos on my blade 400 and wow they are really good. First thing I noticed that they were smaller, lighter, faster and made way more torque than the HS-65mg servos I was using before plus they are also metal gear and Digital and the price is also right. The HS-65MG at 4.8v is 0.14sec and the DS 450 at 4.8v is 0.12. They can handle 6v without a problem. In flight they feel more responsive and more locked in especially under load like doing 4 point tic tocs. Under power if I push on the swashplate there is zero movement they center awesome. I am also running a CC BEC. The servo leads are shorter so for the back ones that was perfect since they are so close to the RX less wire to worry about and for the front I used a short servo extention. Just thought you guys would like to know of another servo option for our helis. Here are some pics

http://www.neumotors.com/store/page8/page8.html

Notice the room between the servos


I had to oval the hole a little since they are a tad shorter.

PM  EMAIL  Attn:RR  Quote
04-22-2009 02:08 PM  9 years agoPost 2
ddtx2

rrNovice

Venezuela

My Posts: All  Forum  Topic

Thanks for the info!

PM  EMAIL  Attn:RR  Quote
04-23-2009 04:34 AM  9 years agoPost 3
Biblejosh

rrNovice

Tazewell, TN

My Posts: All  Forum  Topic

darn
I wish you would had said something a lil earlier. I got 3 hs68mg's in like two weeks ago. I like them pretty good though.

Hey, where's the reset button?

PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
04-26-2009 04:29 AM  9 years agoPost 4
Biblejosh

rrNovice

Tazewell, TN

My Posts: All  Forum  Topic

darn
I meant Hs65mg's. My bad....

Hey, where's the reset button?

PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
06-25-2009 04:05 PM  9 years agoPost 5
Buildem336

rrNovice

Vista Ca

My Posts: All  Forum  Topic

I have been putting a beating on my DS450 servos for a couple of months and they are performing perfect I highly recomend these servos.

I finally got a chance to make a video flying my new servos.

http://www.youtube.com/watch?v=CgzRUMBRmYY";' class=rrCLK>YouTube - Blade 400 testing out my new MKS DS 450 Servos

PM  EMAIL  Attn:RR  Quote
06-26-2009 06:44 PM  9 years agoPost 6
Mitchilito

rrVeteran

Morehead City, NC USA

My Posts: All  Forum  Topic

Hey, thanks for the hot tip, Buildem. I'll save my pennies for a servo makeover!

PM  EMAIL  GALLERY  Attn:RR  Quote
07-07-2009 12:00 PM  9 years agoPost 7
Mitchilito

rrVeteran

Morehead City, NC USA

My Posts: All  Forum  Topic

DS470
Hey Buildem,
I notice the DS470 is the same size/weight yet considerably faster. Why wouldn't you choose those instead?

PM  EMAIL  GALLERY  Attn:RR  Quote
07-07-2009 04:05 PM  9 years agoPost 8
Buildem336

rrNovice

Vista Ca

My Posts: All  Forum  Topic

I went with these because I wanted the extra torque they offered over the DS470. The DS 450 is already fast enough for me.

PM  EMAIL  Attn:RR  Quote
07-08-2009 03:24 PM  9 years agoPost 9
Mitchilito

rrVeteran

Morehead City, NC USA

My Posts: All  Forum  Topic

Wah-hoo
Just ordered 3 DS450s for my razorblade (got sick of the whimpy/sloppy spektrums).

I originally ordered Hitec 65MGs for it but then realized they weigh 12 grams each - too much for the mini-blade so I put them in my B400 where they are currently kicking ass!!

I like that the Neu's only weigh 9g's and are smaller than the H65s. Thanks Buildem!

Only thing left to to make my razorblade the utimate CP is a Futaba 520 gyro: only TEN GRAMS!! (I'm already down to 255gs )

PM  EMAIL  GALLERY  Attn:RR  Quote
07-10-2009 03:00 PM  9 years agoPost 10
will7104

rrNovice

LaCenter, Wa.

My Posts: All  Forum  Topic

Ino Labs Servo
Does anyone know if you can run an Inolabs 202 servo in digital with a 401 Gyro?

PM  EMAIL  Attn:RR  Quote
WATCH
 1 page 1490 views POST REPLY
HomeAircraftHelicopter
e-
Blade
Blade 400 › 3D New servos on my Blade 400
 Print TOPIC  Make Suggestion 

 3  Topic Subscribe

Wednesday, December 19 - 12:04 am - Copyright © 2000-2018 RunRyder   EMAILEnable Cookies

The RC discussion world needs to consolidate. RR is now one choice for that. Its software is cutting edge. It hosts on-topic advertising. Help RR increase traffic buy making suggestions, posting in RR's new areas (sites) and by spreading the word.

The RunRyder Difference

• Category system to allow Rep/Vendor postings.
• Classifieds with sold (hidden) category.
• Classifieds with separate view new.
• Answer PMs offsite via email reply.
• Member gallery photos with advanced scripting.
• Gallery photo viewer integrated into postings.
• Highly refined search with advanced back end.
• Hosts its own high end fast response servers.
• Hosts thousands of HD event coverage videos.
• Rewrote entire code base with latest technology.
• No off-topic (annoying) click bait advertising.
Login Here
 New Subscriptions 
 Buddies Online