RunRyder RC
WATCH
 2 pages [ <<    <     1     ( 2 )    >    >> ] 1478 views Post Reply
09-18-2009 02:16 AM  11 years ago
Mutt

rrKey Veteran

M ca usa

MyPosts All Forum Topic
i have mine done with the ca on one of my hawks same boom and stuff since 2005 never has come unglued at any time never has failed nothing go with the ca it just takes a pin drop no more then that holds fine.
SHARE  PM  EMAIL  Attn:RR  Quote
09-18-2009 03:44 AM  11 years ago
Gearhead

rrMaster

Vt

MyPosts All Forum Topic
I had CA brake loose that is why I went to the Tape, I never had the Tape come loose from Fuel Jim
Buzz Buzz Buzz
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
09-18-2009 05:35 AM  11 years ago
oldfart

rrProfessor

Vancouver, Canada

MyPosts All Forum Topic
This is what a good heli-community is all about.

Some great ideas here!!

I have tried various glue ideas over the years and when applied properly, they all worked quite well. Now I will have to try BM1's screw idea one of these days. Seems like it would also work very well.
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
09-29-2009 10:14 AM  11 years ago
sdsniper

rrNovice

Kodiak, Alaska USA

MyPosts All Forum Topic
Scrap the guides
Been flying a fully up graded Sport and a raven for 4 years without the guides. I used a 4mm carbon rod weight is low compared to strength have never had an issue since. If you think the carbon rods are not stiff enough just ask a giant scale guy what he uses. GS plane rods are 2 to 4 times the length of our tails ESP if your servo is mounted on the boom
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
WATCH
 2 pages [ <<    <     1     ( 2 )    >    >> ] 1478 views Post Reply
Print TOPIC

 8  Topic Subscribe

Thursday, January 21 - 3:33 pm - Copyright © 2000-2021 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online