RunRyder RC
WATCH
 2 pages [ <<    <     1     ( 2 )    >    >> ] 2921 views POST REPLY
HomeAircraftHelicopterFuel-Helicopters New or Limited ActivityJS › Getting mine up~~~
04-24-2009 06:03 PM  9 years agoPost 21
gondwnhard

rrApprentice

redwood city ca.

My Posts: All  Forum  Topic

where the hell have you bin its a clone of a vibe and if you keep this up your going to get there panties in a twist

PM  EMAIL  GALLERY  Attn:RR  Quote
04-24-2009 06:13 PM  9 years agoPost 22
VooDooX

rrElite Veteran

San Francisco Bay Area CA, US (San Mateo)

My Posts: All  Forum  Topic

and there panties twist and wad easily lol i got banned from audacity forum kinda cuz they all complained about me

Velocity 50 "99.9999999999999% of an atom is empty space." also 01001000 01001001

PM  EMAIL  GALLERY  Attn:RR  Quote
04-24-2009 06:15 PM  9 years agoPost 23
135boom

rrApprentice

Deerfield, Illinois

My Posts: All  Forum  Topic

One note for the Frenzy II owners, you need to grind away part of the rear swash Link or it will hit the tail drive pinion at high negative pitch and some rear cyclic. 3D folks would definitely see this. I stumbled onto it during setup of the heli. I took off about 1/16in from the beefy aluminum arm. There is more than enough material to spare so there is no risk in grinding a bit of material away.

PM  EMAIL  Attn:RR  Quote
04-24-2009 06:18 PM  9 years agoPost 24
VooDooX

rrElite Veteran

San Francisco Bay Area CA, US (San Mateo)

My Posts: All  Forum  Topic

hell ya that things beefy i didn't have any issues tho are you sure your throws aren't too high?

Velocity 50 "99.9999999999999% of an atom is empty space." also 01001000 01001001

PM  EMAIL  GALLERY  Attn:RR  Quote
04-24-2009 06:20 PM  9 years agoPost 25
135boom

rrApprentice

Deerfield, Illinois

My Posts: All  Forum  Topic

The Frenzy is a mix of Raptor, Sceadu, Vibe, and Align all into one machine. Really cool. As an engineer, hey if you don't protect you intellectual property with a patent, don't whine when your idea is used by other people. Some say patents are too expensive... well how much is loss of business worth?

PM  EMAIL  Attn:RR  Quote
04-24-2009 06:23 PM  9 years agoPost 26
135boom

rrApprentice

Deerfield, Illinois

My Posts: All  Forum  Topic

Throws were to the max for initial setup until I set the pitch curve up. I just didn't want to chance hitting the tail drive. I do love this machine though.

PM  EMAIL  Attn:RR  Quote
04-24-2009 06:34 PM  9 years agoPost 27
J. Hall

rrApprentice

Jonesboro, AR

My Posts: All  Forum  Topic

Had to grind a little off mine as well. I was doing back flips Wednesday afternoon, and coming over backwards it just kinda stuck for a moment then came on over.

Jay Hall

PM  EMAIL  GALLERY  Attn:RR  Quote
04-24-2009 10:16 PM  9 years agoPost 28
400driver

rrApprentice

uk/ Spain

My Posts: All  Forum  Topic

Ammo..
looks like 150 South Bridge road to me! Are you selling them in Sing?

More days at home would be nice!

PM  EMAIL  GALLERY  Attn:RR  Quote
04-25-2009 01:57 AM  9 years agoPost 29
135boom

rrApprentice

Deerfield, Illinois

My Posts: All  Forum  Topic

Jay,
You just confirmed my concern. I'm no 3D thrasher like many, but I love to flip around a bit. My style is more F3C and I was worried about sticking of that pushrod.

PM  EMAIL  Attn:RR  Quote
04-25-2009 02:35 PM  9 years agoPost 30
ammo

rrVeteran

Singapore

My Posts: All  Forum  Topic

Ammo..
looks like 150 South Bridge road to me! Are you selling them in Sing?
Hahahaha, looks like someone knows me here

Yes i have them for singapore's customers, but i haven't listed it on my website.

PM  EMAIL  Attn:RR  Quote
05-11-2009 08:53 PM  9 years agoPost 31
choppertime

rrApprentice

Virginia Beach, VA

My Posts: All  Forum  Topic

One note for the Frenzy II owners, you need to grind away part of the rear swash Link or it will hit the tail drive pinion at high negative pitch and some rear cyclic. 3D folks would definitely see this. I stumbled onto it during setup of the heli. I took off about 1/16in from the beefy aluminum arm. There is more than enough material to spare so there is no risk in grinding a bit of material away.
I noticed the exact same issue on mine and did the same grind on the A-arm to take care of it. I thought it was due to putting the aluminum raptor tail pully in instead of the stock plastic one.

PM  EMAIL  GALLERY  Attn:RR  Quote
05-11-2009 09:38 PM  9 years agoPost 32
Mapleleafs

rrVeteran

Ontario, Canada

My Posts: All  Forum  Topic

your wiring job is unreal.....

can you do my heli's...lol

Vbar Trex 700N, Vbar MSH Protos 500, Vbar Logo 400

PM  EMAIL  GALLERY  Attn:RR  Quote
05-29-2009 03:36 AM  9 years agoPost 33
135boom

rrApprentice

Deerfield, Illinois

My Posts: All  Forum  Topic

Unbelievable Machine for the Money
Ok, so we each paid ~$230 shipped for these machines. Has anyone been disappointed yet?

For those that don't own one, yes there are a few minor areas that could use a moment of attention. I'm learning that the clutch is a bit soft and needs improvement, but a simple $3 Rappy clutch lining and life is good. It's not a big deal. I was the one at fault with performing a hot start.

Beyond this minor issue the machine flies fast and like it's on rails. It flips with the best machines out there and tail slides like a rocket and holds it's track without fail. (if you don't have these results with your Frenzy, try a Futaba 611 Gyro)

Bottom line, after a month of flying this thing and literally forgetting I own 4 other brands the Frenzy is an awesome machine and can't be beat for the price. I'm wondering how long this price can hold though. I understand that machine shops worldwide are hurting, but at this price the machine is an absolute steal!!! It's great looking, has all the shiney stuff one could want, and flies equal to or better than any other machine in this class. Did I mention it autos and hangs for a virtual eternity for a .50 class machine?!?

When are they going to put out a JS 3D Frenzy in 90 size for say $319??? I'll be the first in line for one...or two....

PM  EMAIL  Attn:RR  Quote
12-04-2009 03:56 AM  9 years agoPost 34
roccoym

rrNovice

McAllen Tx.

My Posts: All  Forum  Topic

No disappointments here!!! As you stated, you get an awesome bird for the price. I got mine from Chuck Nowell here on RR for 200 shipped. Chuck is an honest guy and has been extremely helpful with my build on this project.

First time I saw this bird fly, I was so impressed, I had one ordered the following day! If anyone decides to get one, you wont be disappointed. My two cents.

PM  EMAIL  GALLERY  Attn:RR  Quote
12-04-2009 01:26 PM  9 years agoPost 35
135boom

rrApprentice

Deerfield, Illinois

My Posts: All  Forum  Topic

Now many months of flying
Still love this machine as I did when I wrote the first blurb. Given this economy, this is THE machine of the year to me!

PM  EMAIL  Attn:RR  Quote
WATCH
 2 pages [ <<    <     1     ( 2 )    >    >> ] 2921 views POST REPLY
HomeAircraftHelicopterFuel-Helicopters New or Limited ActivityJS › Getting mine up~~~
 Print TOPIC  Make Suggestion 

 6  Topic Subscribe

Wednesday, December 12 - 12:56 pm - Copyright © 2000-2018 RunRyder   EMAILEnable Cookies

The RC discussion world needs to consolidate. RR is now one choice for that. Its software is cutting edge. It hosts on-topic advertising. Help RR increase traffic buy making suggestions, posting in RR's new areas (sites) and by spreading the word.

The RunRyder Difference

• Category system to allow Rep/Vendor postings.
• Classifieds with sold (hidden) category.
• Classifieds with separate view new.
• Answer PMs offsite via email reply.
• Member gallery photos with advanced scripting.
• Gallery photo viewer integrated into postings.
• Highly refined search with advanced back end.
• Hosts its own high end fast response servers.
• Hosts thousands of HD event coverage videos.
• Rewrote entire code base with latest technology.
• No off-topic (annoying) click bait advertising.
Login Here
 New Subscriptions 
 Buddies Online