RunRyder RC
WATCH
 12 pages [ <<    <     9      10     ( 11 )     12     NEXT    >> ] 17797 views POST REPLY
HomeAircraftHelicopterHIROBOOther › Sceadu SDX Count
04-29-2010 10:02 PM  8 years agoPost 201
patrik_heli

rrNovice

sweden

My Posts: All  Forum  Topic

hoping to start getting radio installed this weekend provided the damn custom sends it to the post office

PM  EMAIL  Attn:RR  Quote
04-29-2010 10:15 PM  8 years agoPost 202
Bouchah

rrKey Veteran

Willow Spring, N. Carolina USA

My Posts: All  Forum  Topic

Piyaphan1
Where do you get the blue Hirobo velcro straps? Is there a part # for them? Thanks.

PM  EMAIL  GALLERY  Attn:RR  Quote
04-30-2010 06:54 PM  8 years agoPost 203
Piyaphan1

rrApprentice

Bangkok, Thailand

My Posts: All  Forum  Topic

Part no. is 2513-098 RC mechanical cushion band and retails at 800Yen.
One pact comes in 2 pcs., 1 wide, 1 narrow.

I order them from RCchamps in Japan.

Hirobo makes just about everything you could imagine relating RC heli.
I got cap, polo shirts, sunglasses, tools, starter shaft, blade balancer, etc.
You could check in the manual, their website, etc.

http://model.hirobo.co.jp/index.html

and go to Catalogue Download page

Piyaphan
TurbulenceD3 YS-SR3C / TurbulenceD3 YS-SR3C-RR / Lepton

PM  EMAIL  GALLERY  Attn:RR  Quote
05-01-2010 03:19 AM  8 years agoPost 204
Heli Wiz

rrApprentice

Moravia,N.Y. U.S.A.

My Posts: All  Forum  Topic

Here's my front engine cover, basically like the one Piyaphan1 has, but mine is home made. I used 1/16 thin alum. which I bent, drilled and formed to fit! After I made sure the fit and the slotted hole were correct, I then Powder coated it with a high temp black powdercoat. I'm very happy with the finished product. I had to put the HIROBO Logo on it to show my brand loyalty!

PM  EMAIL  GALLERY  Attn:RR  Quote
05-04-2010 01:06 AM  8 years agoPost 205
Heli Wiz

rrApprentice

Moravia,N.Y. U.S.A.

My Posts: All  Forum  Topic

Here's some pics of my bird with the powder coated pipes that I just did!

PM  EMAIL  GALLERY  Attn:RR  Quote
05-05-2010 03:45 AM  8 years agoPost 206
planefxr

rrNovice

San Diego, CA. USA

My Posts: All  Forum  Topic

SDX
Just ordered, it's on the way. I'am going to try the Nova rossi 57 with pipe.

David

PM  EMAIL  GALLERY  Attn:RR  Quote
05-05-2010 12:44 PM  8 years agoPost 207
songxy

rrNovice

Shanghai, China

My Posts: All  Forum  Topic

very nice

PM  EMAIL  Attn:RR  Quote
05-05-2010 03:04 PM  8 years agoPost 208
rexxigpilot

rrProfessor

Florida

My Posts: All  Forum  Topic

David,

I use the 57 on my SDX. It makes great power.

You may want to consider another pipe like the Outrage to go with the NR57. While the NR H5 pipe makes good power, it has some issues. The o-rings and rubber grommets get eaten up very quickly. You will be replacing them every couple of gallons to prevent exhaust leaks.

Also, on the SDX you need to get the correct header for adequate frame clearance.

Follow the directions carefully when setting up the throttle and setting the low/mid speed needle. Use 0.5mm shims on 30%. Run a high HS (2100-2150) to keep the engine firmly on the crank boost. Too low RPM and the engine will keep going in and out of boost.

Good luck and enjoy your SDX.

PM  EMAIL  GALLERY  Attn:RR  Quote
05-05-2010 07:20 PM  8 years agoPost 209
planefxr

rrNovice

San Diego, CA. USA

My Posts: All  Forum  Topic

SDX NR SETUP
Thanks very much REXXIGPILOT. That kind of feedback makes you guys & this site what it is.

Thanks again.

David:

PM  EMAIL  GALLERY  Attn:RR  Quote
06-01-2010 04:03 AM  8 years agoPost 210
PilotPin

rrApprentice

Indiana -- USA

My Posts: All  Forum  Topic

Built mine this this winter. Everything on it is new.
Was able to run two tanks of fuel through it this weekend
for engine breakin. Can't hardle wait to really let it go.

PM  EMAIL  GALLERY  Attn:RR  Quote
06-02-2010 04:23 AM  8 years agoPost 211
godspeed128

rrApprentice

NC

My Posts: All  Forum  Topic

Canopy
A few shots of my new Canopy

There is nothing in this world constant, but inconsistency.

PM  EMAIL  GALLERY  Attn:RR  Quote
06-04-2010 10:37 AM  8 years agoPost 212
Helicrazy4

rrVeteran

West Virginia

My Posts: All  Forum  Topic

SDX will be here next week looking forward to getting the kit This Is my first nitro heli.

PM  EMAIL  Attn:RR  Quote
06-04-2010 05:51 PM  8 years agoPost 213
rudyy

rrElite Veteran

E. Amherst, NY

My Posts: All  Forum  Topic

Nice!

PM  EMAIL  GALLERY  Attn:RR  Quote
06-05-2010 01:10 PM  8 years agoPost 214
doorman

rrProfessor

Sherwood, Arkansas

My Posts: All  Forum  Topic

Good Job.....
godspeed128, that is one good looking SDX.....I think that new canopy is nothing short of "HOT"I am glad to hear that more guys are finding out how great a flying heli this really is.... it even makes me look good and that says a LOT for a heli!!!!! (OK open to flaming!!!!!)

Good Luck with all of them...... I will be starting my 3 (??) next week.... but this one is going to be a 10s set up.... so it should be about as close to insane as we want to get!!! I just want to make sure it will keep up with these 55/57's

Will keep you posted...... Stan

AMA 2918-Team Spin Blades,,Castle Creations, Unique Aircraft

PM  EMAIL  GALLERY  Attn:RR  Quote
06-05-2010 01:13 PM  8 years agoPost 215
TUFF MUFFLER

rrApprentice

RUTLAND,VT

My Posts: All  Forum  Topic

the word sandbager comes to mind.

A positive outlook is all that is required

PM  EMAIL  Attn:RR  Quote
04-17-2011 01:44 AM  7 years agoPost 216
freakyreef

rrKey Veteran

Kansas\Colorado border

My Posts: All  Forum  Topic

Here is mine. Got the first few flights under my belt and am working on adjusting it to my liking (faster cyclic).
The canopy is a bit tough to see on a cloudy day, but a sunny day it seems to show up fine.

Walk on water long enough, eventually you will get your feet wet.

PM  EMAIL  GALLERY  Attn:RR  Quote
04-18-2011 02:46 PM  7 years agoPost 217
nytflyer

rrApprentice

Temasek

My Posts: All  Forum  Topic

my first 50. . .
I managed to get my SDX just recently and at a great price of USD$300. Got most of the electronics. Will be using Hitec 79** HV servos series for my cyclics. Great torque and speed for its price . GY611 + 9256 digital for gyro part (actually, i bought GY701 for this heli but figured it better serve on my Freya EX III . So, im running direct 2s lipo with a Gryphon regulator, Futaba R6008HS 8ch rx, 95mm Rotortech on tails and SWE 600mm DCW symmetrical (133 gms) for mains.Tmrf electric conversion on its way and couple with the latest kontronik 650 series motor running on 10s and a Hobbywing Platinum 120A HV esc to control it. Hope to practise F3C with this. Maybe a SZ-V rotorhead will probably find its way to my SDX! Will post pictures of Insane 10s soon!

PM  EMAIL  GALLERY  Attn:RR  Quote
04-27-2011 02:23 AM  7 years agoPost 218
870heli

rrVeteran

Monson Ma. USA

My Posts: All  Forum  Topic

Sceadu SDX
Well I just got my Third SDX kit. So I have two flying with OS-50's and one in the box. I still have four Sceadu-EVO50's and two EVO-90's all flying. And I just sold two EVO's and gave one EVO-50 to one of my Sons. I gess I am still in this HIROBO thing. I think they work better than anything I have flown. And I have been flying Heli's for 28 years. And had a Hobby Shop.
I have some that have four years on them and still keep on going!
HI stan, I will send you a PM.
870Heli---- Buz

PM  EMAIL  GALLERY  Attn:RR  Quote
04-27-2011 12:44 PM  7 years agoPost 219
Lewd Skywalker

rrApprentice

Manila, Philippines

My Posts: All  Forum  Topic

My first post here was in April 14, 2009, when I got to maiden my SDX (one of the first production kits).

How are your first SDXs holding???

Mine's got one major crash (broken blades, servo tray) and one hard (auto, skids broke) landing, but its basically the same kit. Had been flying mild to hard 3D with it (mostly every Sundays) and so far the ball links needs replacement and small slops had been developing on the wash-out slider. the belt is still good and just replaced for the 3rd time the stock one-way bearing.

I'm running it now with the 55HZ engine and funtech pipe, Mavrikk blades and yes original stock plastic blades

This is one heck of a durable, reliable and sturdy 50-machine! As usual with Hirobos, this is the 50 for long life!

Nice Fusuno canopies! Hoping to get one for mine someday!

BTW, what's the count now? Thanks.

PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
05-07-2011 01:21 PM  7 years agoPost 220
Fabrice

rrNovice

Arras, France

My Posts: All  Forum  Topic

Hello,
here is mine ...

Watch at YouTube

Fabrice

Sceadu Evo 50 - SDX 55 - T14SG V2.02 - CGY 750 www.fabricedelhay.fr

PM  EMAIL  HOMEPAGE  Attn:RR  Quote
WATCH
 12 pages [ <<    <     9      10     ( 11 )     12     NEXT    >> ] 17797 views POST REPLY
HomeAircraftHelicopterHIROBOOther › Sceadu SDX Count
 Print TOPIC  Make Suggestion 

 42  Topic Subscribe

Saturday, December 15 - 6:28 am - Copyright © 2000-2018 RunRyder   EMAILEnable Cookies

The RC discussion world needs to consolidate. RR is now one choice for that. Its software is cutting edge. It hosts on-topic advertising. Help RR increase traffic buy making suggestions, posting in RR's new areas (sites) and by spreading the word.

The RunRyder Difference

• Category system to allow Rep/Vendor postings.
• Classifieds with sold (hidden) category.
• Classifieds with separate view new.
• Answer PMs offsite via email reply.
• Member gallery photos with advanced scripting.
• Gallery photo viewer integrated into postings.
• Highly refined search with advanced back end.
• Hosts its own high end fast response servers.
• Hosts thousands of HD event coverage videos.
• Rewrote entire code base with latest technology.
• No off-topic (annoying) click bait advertising.
Login Here
 New Subscriptions 
 Buddies Online