RunRyder RC
WATCH
 1 page 671 views POST REPLY
HomeRC & PowerAircraftHelicopterEngines Plugs Mufflers Fuel › Let talk OS Hyper 50
04-01-2009 07:15 PM  9 years agoPost 1
ssrobzoom

rrKey Veteran

Tn

My Posts: All  Forum  Topic

What is the typical needle setting for the following:

Enya # 3 plug on a Align 600 Nitro with 600mm Radix blades

15% Nitro Coolpower?

30% Nitro Coolpower?

Is the Hyper designed to run on 15% Nitro?

PM  EMAIL  GALLERY  Attn:RR  Quote
04-01-2009 07:36 PM  9 years agoPost 2
BarracudaHockey

rrMaster

Jacksonville FL

My Posts: All  Forum  Topic

Wherever it ends up at

Yes it will run on 15 percent but the tuning range to get too performance isn't as wide as with 30 but you get longer flights and its cheaper.

Andy
AMA 77227
http://www.jaxrc.com

PM  EMAIL  GALLERY  Attn:RR  Quote
04-01-2009 07:47 PM  9 years agoPost 3
Dr Lodge

rrElite Veteran

Guildford, Surrey - UK

My Posts: All  Forum  Topic

Main needle out 1.25 to 1.5 turns give or take. Depends on your setup, fuel etc. but the right setting is...whatever turns out to be right for you.

Vibe 90, Vibe 50, Vigor CS x2,
Dyna-x, Knight 503D, Logo 10,
TRex 500, Furion, Gaui EP200

PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
04-01-2009 08:38 PM  9 years agoPost 4
flyboy907

rrVeteran

woodstock, ga

My Posts: All  Forum  Topic

do a search for more info if you don't get much on this thread, tons of it out there, I run carbsmart on 100 or 110 with 30%, getting around 1.25 to 1.75 range runs mostly just over 1.25

PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
04-01-2009 09:03 PM  9 years agoPost 5
MartyH

rrProfessor

USA

My Posts: All  Forum  Topic

15% Wildcat, OS#8 plug and about 1 3/8" turns out from closed.

PM  EMAIL  GALLERY  Attn:RR  Quote
04-01-2009 09:32 PM  9 years agoPost 6
AaronJohnson

rrElite Veteran

mason,MI

My Posts: All  Forum  Topic

30% CY performance, OS #8 plug. I am at about 1 1/8 turn I use the Carbsmart set at 110C.

PM  EMAIL  GALLERY  Attn:RR  Quote
04-02-2009 02:37 AM  9 years agoPost 7
helirulz

rrVeteran

Singapore

My Posts: All  Forum  Topic

the 50hyper makes great power on wildcat 15%!
I'm currently burning CP20% but i feel that WC15% has better power.

Cant go wrong with WC IMO

PM  EMAIL  Attn:RR  Quote
04-02-2009 03:06 AM  9 years agoPost 8
Dilbeck

rrElite Veteran

Springdale Arkansas

My Posts: All  Forum  Topic

Run it the way it runs the coolest with the most power... For example, 20% nitro on an OS A3 plug @ 70 deg Fahrenheit @ 1 and 1/4 turns out based on 65% humidity @ an elevation of 1,250 feet and the sensitivity of heat on your finger on the bottom plate may well net you the best power today!!

Clint

PM  EMAIL  GALLERY  Attn:RR  Quote
04-02-2009 03:09 AM  9 years agoPost 9
RayoVac

rrVeteran

raptor4ever is a THIEF!!!

My Posts: All  Forum  Topic

Cool Power 30%, OS 8 plug... about 1.5 turns out.

PM  EMAIL  GALLERY  Attn:RR  Quote
04-02-2009 03:13 AM  9 years agoPost 10
DANBOONE

rrApprentice

Plymouth, IN 46563

My Posts: All  Forum  Topic

Wildcat 30% Curtis, OS 8 plug... about 1.375 turns out.

Thunder Tiger Rep

PM  EMAIL  Attn:RR  Quote
04-02-2009 03:18 AM  9 years agoPost 11
RayoVac

rrVeteran

raptor4ever is a THIEF!!!

My Posts: All  Forum  Topic

O.K. Dan you stalker.. to be more precise... my Mixture Control keeps my head at the temperature I set...no fiddling!!! (but I start around 1.5 turns out).

SMARTASS!!!

PM  EMAIL  GALLERY  Attn:RR  Quote
04-02-2009 05:02 AM  9 years agoPost 12
rccarguy

rrVeteran

Boston MA

My Posts: All  Forum  Topic

Wildcat 30%, 1 1/4 to 1 1/2 turns depending on current weather conditions. First flight of the day I do a temp check at the head and backplate and adjust accordingly. If I'm excessively lazy I just check temp and fly without adjusting as long as the temp is on the cool side.

XCell Spectra G
Radikal G20
Some obsolete nitro helis too...

PM  EMAIL  GALLERY  Attn:RR  Quote
04-02-2009 02:01 PM  9 years agoPost 13
ssrobzoom

rrKey Veteran

Tn

My Posts: All  Forum  Topic

Added this info to original post at top:

Running a Enya # 3 plug on a Align 600 Nitro with 600mm Radix blades

PM  EMAIL  GALLERY  Attn:RR  Quote
WATCH
 1 page 671 views POST REPLY
HomeRC & PowerAircraftHelicopterEngines Plugs Mufflers Fuel › Let talk OS Hyper 50
 Print TOPIC  Make Suggestion 

 4  Topic Subscribe

Friday, September 21 - 9:38 am - Copyright © 2000-2018 RunRyder   EMAILEnable Cookies

The RC discussion world needs to consolidate. RR is now one choice for that. Its software is cutting edge. It hosts on-topic advertising. Help RR increase traffic buy making suggestions, posting in RR's new areas (sites) and by spreading the word.

The RunRyder Difference

• Category system to allow Rep/Vendor postings.
• Classifieds with sold (hidden) category.
• Classifieds with separate view new.
• Answer PMs offsite via email reply.
• Member gallery photos with advanced scripting.
• Gallery photo viewer integrated into postings.
• Highly refined search with advanced back end.
• Hosts its own high end fast response servers.
• Hosts thousands of HD event coverage videos.
• Rewrote entire code base with latest technology.
• No off-topic (annoying) click bait advertising.
Login Here
 New Subscriptions 
 Buddies Online