RunRyder RC
 4  Topic Subscribe
WATCH
 1 page 967 views POST REPLY
HomeAircraftHelicopter
e-
Electric General Discussion
› Best Align motor & esc setup for a Trex600e
01-18-2009 11:47 PM  9 years agoPost 1
relax1

rrVeteran

Tampa, FL

My Posts: All  Forum  Topic

What is the best motor esc combo for the trex600e? Is it 650L motor 14t/15t or 600XL with 10t/11t pinion. Also will the BL75G esc have enough current to run it or would you need the BL100G esc?
I have flown the 600XL with the BLG75g esc on 10t pinion. Let me tell you this is a fun 3D setup.
This will be use for hard 3D flying. I only want to stick with align combinations not interested on buying any other brands.

Thanks

Luis

PM  EMAIL  GALLERY  Attn:RR  Quote
01-19-2009 01:12 AM  9 years agoPost 2
helicraze

rrElite Veteran

Victoria - Australia

My Posts: All  Forum  Topic

Well its either the 600L which is apprently underpowered or the 600XL which is stock and often people have broken shafts, or the 650L which i am unsure.
No point spending money if you're happy with what you have.

PM  EMAIL  GALLERY  Attn:RR  Quote
01-19-2009 02:22 AM  9 years agoPost 3
relax1

rrVeteran

Tampa, FL

My Posts: All  Forum  Topic

I'm doing research for a friend that has an old trex600e with the 600L motor.Its being collecting dust for the longest time.

PM  EMAIL  GALLERY  Attn:RR  Quote
01-19-2009 10:29 PM  9 years agoPost 4
relax1

rrVeteran

Tampa, FL

My Posts: All  Forum  Topic

tt

PM  EMAIL  GALLERY  Attn:RR  Quote
01-20-2009 02:27 PM  9 years agoPost 5
Magic Hook

rrApprentice

Naples, Florida USA

My Posts: All  Forum  Topic

I switched from the 75a esc to the 100 esc and get lower temps on the esc and the xl motor. That said I just ordered a Scorpion motor to replace the xl.

PM  EMAIL  GALLERY  Attn:RR  Quote
01-20-2009 03:22 PM  9 years agoPost 6
Richardmid1

rrProfessor

Leeds, England

My Posts: All  Forum  Topic

A Scorpion motor is what you want and probably cheaper than an Align motor! The stock 75amp ESC is fine with the Scorpion motor.

60% of the time, it works every time!

PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
01-21-2009 01:16 AM  9 years agoPost 7
kenneysme

rrApprentice

blgs. mt.

My Posts: All  Forum  Topic

relax1
Align motors are alittle short on power and stamina for HARD 3d.

PM  EMAIL  Attn:RR  Quote
01-21-2009 10:35 AM  9 years agoPost 8
Richardmid1

rrProfessor

Leeds, England

My Posts: All  Forum  Topic

^^^And you can fry an egg on them after a flight! lol.

60% of the time, it works every time!

PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
01-21-2009 10:27 PM  9 years agoPost 9
papatango

rrVeteran

Toronto, Ontario, Canada

My Posts: All  Forum  Topic

Xera 4025 & Kontronik Jive HV( or Power Jazz) on 12s. The motors are getting wicked reviews, and the customer service is great, not to mention the price. There's a link up in the AP section for Xera 4035.

PM  EMAIL  GALLERY  Attn:RR  Quote
01-24-2009 12:13 AM  9 years agoPost 10
relax1

rrVeteran

Tampa, FL

My Posts: All  Forum  Topic

I have done four back to back 3d flights 100% throttle with 13t pinion. My Trex500 motor gets very hot, but it makes lots of power. This is the original motor since the Trex500 came out.Never any issues
So much to say about the Align motors!

Luis

PM  EMAIL  GALLERY  Attn:RR  Quote
01-26-2009 06:13 PM  9 years agoPost 11
kenneysme

rrApprentice

blgs. mt.

My Posts: All  Forum  Topic

I was reffering to 600e motors.

PM  EMAIL  Attn:RR  Quote
WATCH
 1 page 967 views POST REPLY
HomeAircraftHelicopter
e-
Electric General Discussion
› Best Align motor & esc setup for a Trex600e
 Print TOPIC  Make Suggestion 

 4  Topic Subscribe

Sunday, June 24 - 7:58 pm - Copyright © 2000-2018 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online