RunRyder RC
 1  Topic Subscribe
WATCH
 1 page 298 views POST REPLY
HomeClassifiedAircraftHelicopter
e-
Classifieds - Elec Helicopters
 Sold  SOLD-Belt CP airframe + parts 30.00 shipped US
01-18-2009 07:47 PM  9 years agoPost 1
YuNoHavinStock!

rrNovice

riverton, ut

My Posts: All  Forum  Topic

My Classified Activity
My Classified Feedback
Add Classified Feedback

SOLD-Belt CP airframe with 3 Hs-55's. one of these has a twitch and needs to be replaced. also the main gear is missing a few teeth. I am including a MX400 main gear, but the one way bearings need to be swapped as the one on the MX400 is bad. I have done the DTS mod and it has improved the flight characteristics over the stock config. Here are the extra parts I have with it:
Misc links and balls
1-head button
1-washout base
2-feathering shafts-used
1-flybar case set nip
1-main shaft collar w/ hardware nip
1-misc swashplate parts
1-main blade grip w/ 1 nut and washers
2- head dampers
2 unused tail drive gear sets
1-pakage of hdx 1mm blade shims
2-10t pinions 1 is a rhino gear
lots of servo arms for Hs-55's
2 hs-55's for parts,the motors are burned out.

the main shaft and feathering shaft were just replaced and are new. I stripped the electronics off the belt for my new copterx. 30 bucks shipped to the US.[IMG]Belt CP airframe with 3 Hs-55's. one of these has a twitch and needs to be replaced. also the main gear is missing a few teeth. I am including a MX400 main gear, but the one way bearings need to be swapped as the one on the MX400 is bad. I have done the DTS mod and it has improved the flight characteristics over the stock config. Here are the extra parts I have with it: Misc links and balls 1-head button 1-washout base 2-feathering shafts-used 1-flybar case set nip 1-main shaft collar w/ hardware nip 1-misc swashplate parts 1-main blade grip w/ 1 nut and washers 2- head dampers 2 unused tail drive gear sets 1-pakage of hdx 1mm blade shims 2-10t pinions 1 is a rhino gear lots of servo arms for Hs-55's 2 hs-55's for parts,the motors are burned out. the main shaft and feathering shaft were just replaced and are new. I stripped the electronics off the belt for my new copterx. 30 bucks shipped to the US.


PM  EMAIL  Attn:RR  Quote
WATCH
 1 page 298 views POST REPLY
HomeClassifiedAircraftHelicopter
e-
Classifieds - Elec Helicopters
 Sold  SOLD-Belt CP airframe + parts 30.00 shipped US
 Print TOPIC  Make Suggestion 

 1  Topic Subscribe

Classifieds › HELP-FAQ
Attention Buyers! To receive feedback Post Reply in the seller’s topic. The seller can then click your post's Add Classified Feedback link.
Attention Sellers! Stating price is not mandatory but recommended. Post Reply commentary that interferes with the selling process (and not replied to) will be removed upon request. Click Attn:RR on the offending classified post. Repeated NIB-NIP sales are not allowed. Take it to EBay.
Buyer Beware! RunRyder cannot vouch for any seller's or buyer's credibility and will not accept responsibility for any transactions resulting from the use of this site.

Sunday, June 24 - 4:44 am - Copyright © 2000-2018 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online