RunRyder RC
 1  Topic Subscribe
WATCH
 1 page 519 views POST REPLY
HomeAircraftHelicopter
e-
Elec-Helicopters New or Limited Activity
Next-D › HINT-Before you assemble the side frames!
01-16-2009 06:02 PM  9 years agoPost 1
Sky Dancer

rrVeteran

Bryan, Texas

My Posts: All  Forum  Topic

IMHO, for those who are about to build their Rave, I found it easier to install the servos in the side frames (along with a little PolyZap on the keepers for future servo replacement) before the side frame assembly in step 1-1.

First, I suggest reviewing step 6-2 (for the cyclic servos) and the addendum pages 1 and 2 (for the TR servo).

After installing the servos this way, the rest of the build seems to fly together very quickly.

Don C

Keep up your rotor speed !

PM  EMAIL  GALLERY  Attn:RR  Quote
02-26-2009 03:48 PM  9 years agoPost 2
Z900

rrNovice

Netherlands

My Posts: All  Forum  Topic

Very good tip SkyDancer !

Another one: when using HS65(MG), put the cyclic servo on the right (aileron) HIGH in the frame and the servo on the left (pitch) LOW, in the frame. In the buildvideo the aileron servo was positioned low !

Z

PM  EMAIL  Attn:RR  Quote
WATCH
 1 page 519 views POST REPLY
HomeAircraftHelicopter
e-
Elec-Helicopters New or Limited Activity
Next-D › HINT-Before you assemble the side frames!
 Print TOPIC  Make Suggestion 

 1  Topic Subscribe

Wednesday, June 20 - 12:49 pm - Copyright © 2000-2018 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online