RunRyder RC
 0  Topic Subscribe
 1 page 395 views TOPIC CLOSED
HomeClassifiedAircraftHelicopterClassifieds - Fuel Helicopters Sold  raptor 50 parts & misc stuff for sale
01-16-2009 02:10 AM  9 years agoPost 1



My Posts: All  Forum  Topic

My Classified Activity
My Classified Feedback
Add Classified Feedback

Everything that I am selling works as it did when it was brand new. If anything is wrong with the item, I will list it. Like the paddles and the tail rotors. Prices are always without shipping unless I specify. To see if there will even be a shipping charge, I will need your zip code from you. If it is not much to ship, then no shipping charges. If it is a lot to ship, then at least some of it you will need to pay for shipping. I prefer to use USPS to ship with but if you really would like to use Fed Ex or UPS, I would also do them as well. You can also send me a prepaid shipping label via email that I can print out and put on the package. I PREFER TO BE PAID BY USING PAYPAL BY ACCOUNT BALANCE ONLY. NOT BY USING YOUR CREDIT CARD THREW PAYPAL CUZ THEN I GET SOCKED WITH A FEE!!! I would also take a money order or cashiers check but I would ship the item after the money order or cashiers check cashes into my bank account to be sure that they are valid. Insurance can be put on the shipments if you would prefer. All of these prices are negotiable as well!
These parts are from a Raptor 50 SE heli.

All of the raptor 50 parts below sold all together for a total of $120 shipped as long as you live in the U.S. or you can buy them seperate if you do not want all of them. ====================================================================

Pv0373 clutch bell bearing $4

Pv0361 starter coupling $5

Pv0353 Main blade grips $6

Pv0354 Main hub $5

Pv0358 clutch bell $12

Pv0359 clutch $12

Pv0360 starter shaft $5

Pv0361 starter coupling $5

Red Flybar seesaw ak0004 $6

Pv0002 flybar control arm $6

Pv0004 mixing levers $6

Pv0011 wash out set $7

Pv0015 aileron lever $6

Rear servo tray $15

Three futaba J “Y” splitter harness’s for an extra connection $3 each

Futaba J wire extension $3

manual switch $4

Pv0016 tail pitch control lever $4

Pv0033 servo frame $8

Pv0326 carbon graphite base plate- it has three little strips of velcro on the bottom of the plate and some glue to help hold the velcro to the plate. As we all know velcros sticky backing is not strong enough to stick to the base plate for good from the fuel getting on it and the vibration. I used this velcro to help hold up my extra battery pack underneath the heli for my Maxx flood and nav lites. The plate is still a whole peice but with some velcro on the bottm. So it still works fine. $12

White TAIL ROTOR BLADES $2 a little dinged up but are fine.

All of the raptor 50 parts above sold all together for a total of $120 shipped as long as you live in the U.S. or you can buy them seperate if you do not want all of them. ===============================================================================================================================================================================================================

remote green sensor $15

Muffler $30


.HOBBICO 72mhz FREQUENCY CHECKER WITH ANTENNA AND CARRYING CASE $55 shipped if you live in the u.s.



servo $6

Fm receiver with crystal channel 54 $15

I have the EF Sabre transmitter as well for $10 but it does not have the battery pack in it. You will have to get your own.

I have an AC wall plug that plugs into the back of the EF Sabre transmitter for $1 to charge the battery pack while it is in the transmitter.

main blades, main blades are good but the center piece which the main blades connect to has a ball bonded on that broke off before. center part is free anyways. $2

I have the main motor and tail motor both work like new still.
main motor $20
tail motor $10

I have 2 black paddles for this electric heli $2

Misc. stuff for sale

home made little houses, churches, bird houses with rocks and sea shells on them, all $35 a peice except for the cd/dvd holder which is $45

Iomega external hard drive, hi-speed usb 2.0, 7200rpm, 250gb, only used like 3 times, in brand new condition $180

Two 6x9 speakers, they are Phase Linear speakers, PLRS69
They are barely used, I bought them to replace my old burnt out speakers in the doors of my ram but never used them. I found a different pair i wanted to use instead so they are still perfectly fine and work great! $15

Magliner Gemini Senior Convertible Hand Truck
2 in 1 tuck converts from 2 to 4 wheels in seconds.
1000 lb capacity as a cart, 500 lb capacity as a Hand truck.
Deck in cart position measures 51" x 12". Weighs 45 lbs.
Magliner Stair Climbers C5
Heavy Duty Cast Magnesium Sliders
with replacable low friction polymer
skid bars Tough and quiet.
type u nose
castor locks
The pics have a red circle around what this one has on it. If no red circle, then the whole picture is what it is.
costs $400 brand new
this one is used. asking price $320 or best offer

I have a dodge ram jack for changing your tire that comes with the truck from the factory. I can’t use it obviously because I have a lift kit on my truck. $12

98 Dodge Ram 4x4 3/4 ton V-10 8.0 L 2500 regular cab 8' bed loaded with power windows, locks, mirrors, drivers seat, back sliding rear window tinted limo black, side windows tinted 50%,interior is grey and in good condition, kept clean, oil changes and other maintenance kept up to proper time maintenance, 4 1/2" skyjacker suspension lift kit with 3" body lift. 315x12.50 bf goodwrench all terrain tires with rust free 16x10 chrome rims. I kept the rims rust free in the winter by using WD-40--works great, still has the power and torque when I bought it brand new, I specialty ordered this truck so I am the only owner, cd player radio with tweeters and regular speakers. Two base boxes with amp behind seats, just had brand new heater core put in as well as all new brakes, had all brand new ball joints, gear box, tie rods, and steering knuckes put on, tonneu cover, sprayed in bed liner which I got ASAP after I got the truck so there is no rusting of the bed, heavy duty towing package with square reese hitch and wiring already for trailer lites and brakes. 112,000 miles,
$8,000 or best offer, if you have your own rims and tires or want to get your own, I would like to keep mine and I would take off $1000.
So it would be $7000 obo

DVD Cloner 3.0 Software $35

Gateway 2000 monitor $18

I have a mathmetech train set O scale with at least 6 cars with 2 switches and some signs, the engine puffs smoke and makes a loud train bell sound. The track is that grey track that is out there. Quite a bit of track as well. $150

I have a Lionel O scale train set which is a little smaller than the other train set. It smokes as well. I also have a lot of track for that as well as cars. The track is the kind that is silver rails with brown connectors across the bottom of the rails with the silver pins and holes to connect the track. $120

I have a Nintendo, the original first one that came out with the gun and 2 controllers and a wireless controller with about 8 games including duck hunt and Mario brothers. $100

I have the old Atari system with about 24 games and paddle controls as well as stick controls and racing controls. $100

I have an F-16 Combat Stick that connects to your computer for flying games. $12

I have a PC with Windows XP Professional and Microsoft Office suite 2003. It has an all around see through case with about 4 neon lights in it with also the fans light up as well. It also has a little disco light with a mirror in it and the disco light you can change light patterns from a switch in the back. You can also switch to different patterns the neon lights as well. I have bubble lights on it as well. I also have for the fan guards, a James Bond, skull, fire and other different fan guards. It has 4 to 5 fans to keep it very cool! It looks really cool too! It has 512mb of ram in it with room for more a and big hard drive enough to run a business on. Comes with CD-RW, speakers also. It is also upgradeable. It comes with a really nice monitor as well. I keep my stuff clean and take care of it so it still all looks new! I don't want to sell it but I need the money! $670 for the monitor, external speakers, light up case, and stuff inside and even the printer. The printer is a through in. It is an older deskjet 682c color printer that you have to feed the paper one by one or it will not take any at all or might take more than one paper at a time!! It prints pretty dang good though.

And soon up for sale is!!?? YES YOU GEUSSED IT!!?? THE KITCHEN SINK!!!! LOL!!!


I might have other pictures of what ever you are considering to buy, so ask me.

Any Takers

PM me or better yet, email me!!



If you live near Clinton Twp. Michigan, I work on computers.
From troubleshooting & repair to upgrading, networking,building you a computer to fit your needs, make you bussiness cards and more! Teaching you things on computers that you have always wanted to know.
It is $25 an hour plus 45 cents per mile to and from your place and for going to pick up parts from the store. $80 one time fee to build a you a pc instead of $25 an hour. Then $25 an hour at your place for setup and instruction. I also have used computer parts for sale.

Need your bushes/shrubs outside trimmed? Plus clean up?

01-16-2009 03:35 AM  9 years agoPost 2

rrElite Veteran


My Posts: All  Forum  Topic

My Classified Activity
My Classified Feedback
Add Classified Feedback

Would you happen to have a headder tank with bracket?Im local..

01-16-2009 03:39 AM  9 years agoPost 3

rrElite Veteran


My Posts: All  Forum  Topic

My Classified Activity
My Classified Feedback
Add Classified Feedback

If you have more parts for the Raptor SE V2 like mainand feathering shafts,tail booms blades ect PM me your number/name and time to call..

 1 page 395 views TOPIC CLOSED
HomeClassifiedAircraftHelicopterClassifieds - Fuel Helicopters Sold  raptor 50 parts & misc stuff for sale
 Print TOPIC  Make Suggestion 

 0  Topic Subscribe

Classifieds › HELP-FAQ
Attention Buyers! To receive feedback Post Reply in the seller’s topic. The seller can then click your post's Add Classified Feedback link.
Attention Sellers! Stating price is not mandatory but recommended. Post Reply commentary that interferes with the selling process (and not replied to) will be removed upon request. Click Attn:RR on the offending classified post. Repeated NIB-NIP sales are not allowed. Take it to EBay.
Buyer Beware! RunRyder cannot vouch for any seller's or buyer's credibility and will not accept responsibility for any transactions resulting from the use of this site.

Thursday, June 21 - 7:56 am - Copyright © 2000-2018 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online