RunRyder RC
 3  Topic Subscribe
WATCH
 1 page 571 views POST REPLY
HomeAircraftHelicopterRadio - Spektrum DSM › DX6i Issues
01-14-2009 05:58 AM  9 years agoPost 1
Storm07

rrApprentice

Manchester, CT, USA

My Posts: All  Forum  Topic

Anyone encounter issues with the DX6i transmitter? I just bought mine and today, it started getting very glitchy. If you push the throttle level down harder then normal, it will spike up to about 50% then back down. Makes it difficult when using the rudder, cause if you push too hard, your rpms jump....

"The well educated, never graduate"
Blade 400 3D
Falcon 40

PM  EMAIL  Attn:RR  Quote
01-14-2009 07:08 AM  9 years agoPost 2
w.pasman

rrElite Veteran

Netherlands

My Posts: All  Forum  Topic

Had a new DX7 with a broken wire to the idle-up switch
Otherwise it works fine

PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
01-14-2009 04:25 PM  9 years agoPost 3
Busher

rrKey Veteran

Manchester, England

My Posts: All  Forum  Topic

I have just had a TX replaced, the aileron pot on the tx was faulty, causing it to need 54 points of subtrim on the aileron. I thought I would be ok if I used the subtrim but the beggar kept resetting to the mid point and sending the aileron to one side. It was replaced with a new tx and all seems fine with this one. Could be bad calibration or a bad pot.
I like the radio though.

Good luck
Busher

PM  EMAIL  GALLERY  Attn:RR  Quote
01-18-2009 05:45 AM  9 years agoPost 4
leadtongue

rrNovice

S.Plainfield, New Jersey USA

My Posts: All  Forum  Topic

dx6i glitchy
see my reply to bushers post for dx6i calibration.

Installed servos on my wallet so money flys out faster!

PM  EMAIL  Attn:RR  Quote
WATCH
 1 page 571 views POST REPLY
HomeAircraftHelicopterRadio - Spektrum DSM › DX6i Issues
 Print TOPIC  Make Suggestion 

 3  Topic Subscribe

Saturday, June 23 - 5:22 pm - Copyright © 2000-2018 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online