RunRyder RC
 3  Topic Subscribe
WATCH
 1 page 588 views POST REPLY
HomeAircraftHelicopter
e-
Thunder Tiger
Raptor E325 › Servos for E325 ? have S3110 and HS56
01-12-2009 10:32 PM  9 years agoPost 1
sigurdur

rrNovice

Reykjavik, Iceland

My Posts: All  Forum  Topic

I bought E325 probably 2 years ago. I have been assembling it last few days. At the same time I bought the kit I seem to have bought both Futaba S3110 and HS-56 servos.
I am now wondering which ones to use. The holes on the servos do not seem to fit. I think it is easier (or more robust) to fit the Hitec servos be removing vertical mount fin and drill a center hole between the two on the horizontal mount.

Have been inactive in the hobby for two years and do not fly 3D.

I have to buy a receiver as well. I have a 8 channel Futaba radio (PPM/PCM)and all my receivers are to big. Any recomendations ?

PM  EMAIL  Attn:RR  Quote
01-12-2009 10:50 PM  9 years agoPost 2
Heli 770

rrProfessor

USA.

My Posts: All  Forum  Topic

I would use the HS-56 servos(on 6V. for 3D). Futaba R146iP-6 Ch. or R127DF-7 Ch. and a Deans mini ant. or Revolution whip ant.

PM  EMAIL  Attn:RR  Quote
01-12-2009 11:41 PM  9 years agoPost 3
fenderstrat

rrProfessor

Aston,Pa

My Posts: All  Forum  Topic

the 56's will drop right in and everything lines up with no mods or spacers,just drill mounting holes and you are good to go

Compass helis Support Team
PerformancePlusRC field rep
Mini Titan/SE
TEAM KBDD

PM  EMAIL  GALLERY  Attn:RR  Quote
01-13-2009 03:53 AM  9 years agoPost 4
cybernero

rrNovice

Seoul, Republic of Korea

My Posts: All  Forum  Topic

Futaba S3110 is too small size servo for Mini-Titan's CCPM.
HS56 would be good than S3110.

Actually I'm also using HS56HB in my Mini-Titan.
Have no problems with installing and flying.

But you should drill 2mm dia. hall between the servo's default two hall. And cut or sanding the mount of elevator servo little.(you don't need to do for the aileron and pitch).
That's all you should do.

Good luck.

Everything can be fly / I believe I can fly.

PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
WATCH
 1 page 588 views POST REPLY
HomeAircraftHelicopter
e-
Thunder Tiger
Raptor E325 › Servos for E325 ? have S3110 and HS56
 Print TOPIC  Make Suggestion 

 3  Topic Subscribe

Wednesday, June 20 - 6:19 pm - Copyright © 2000-2018 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online