RunRyder RC
WATCH
 2 pages [ <<    <    ( 1 )     2     NEXT    >> ] 1270 views Post Reply
Home✈️Aircraft🚁HelicopterThunder TigerRAPTOR 90 › Bearing Block to Boom Brace Distance?
08-24-2008 12:45 PM  12 years ago
Topic Vote0Post 1
"Cam"

rrKey Veteran

UK

MyPosts All Forum Topic
Bearing Block to Boom Brace Distance?
I have have a gear missing so can't mesh them, nor work out 2 lengths I need to start making my frame.

Can anyone measure these from their Raptor please?

X = ___
Y = ___

Thank You!
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
08-24-2008 12:49 PM  12 years ago
steve 01

rrProfessor

Grand Rapids MI

MyPosts All Forum Topic
With the stop installed on the mainshaft already (the blue one ) that is the correct distance for the bearing block Happy Building
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
08-24-2008 12:50 PM  12 years ago
steve 01

rrProfessor

Grand Rapids MI

MyPosts All Forum Topic
Unless you building a frame from scratch then I understand your problem
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
08-24-2008 12:53 PM  12 years ago
"Cam"

rrKey Veteran

UK

MyPosts All Forum Topic
The distance between the bearing blocks is fixed.

I need the dimensions of the Boom brace relative to the mast bearing blocks so I get the correct mesh between the tail drive gears (I don't have the red one yet). Thats what the red lines, X and Y are for!

Yes I'm making a frame from scratch.

Thanks.
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
08-24-2008 01:13 PM  12 years ago
steve 01

rrProfessor

Grand Rapids MI

MyPosts All Forum Topic
y=54mm
x=46mm
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
08-24-2008 01:19 PM  12 years ago
"Cam"

rrKey Veteran

UK

MyPosts All Forum Topic
Really? Exactly? With a verneer?

X is about 25
Y does look about 46 thanks

46? You measured the diagonal?
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
08-24-2008 01:22 PM  12 years ago
steve 01

rrProfessor

Grand Rapids MI

MyPosts All Forum Topic
NO I didnt measure diagonal
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
08-24-2008 01:28 PM  12 years ago
steve 01

rrProfessor

Grand Rapids MI

MyPosts All Forum Topic
sorry 13mm to the front hole
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
08-24-2008 01:32 PM  12 years ago
"Cam"

rrKey Veteran

UK

MyPosts All Forum Topic

What's X and Y on an Raptor side frame?
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
08-24-2008 01:34 PM  12 years ago
steve 01

rrProfessor

Grand Rapids MI

MyPosts All Forum Topic
LOL, the first time I went to a frame that was built the second time I scribed an old broken frame to measure it more accurately
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
08-24-2008 01:37 PM  12 years ago
steve 01

rrProfessor

Grand Rapids MI

MyPosts All Forum Topic
SO there ya go,You should be able to finish your frames today
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
08-24-2008 01:42 PM  12 years ago
"Cam"

rrKey Veteran

UK

MyPosts All Forum Topic
Different times zones.

Can you confirm your numbers again please?
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
08-24-2008 02:00 PM  12 years ago
steve 01

rrProfessor

Grand Rapids MI

MyPosts All Forum Topic
measurements
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
08-24-2008 02:12 PM  12 years ago
steve 01

rrProfessor

Grand Rapids MI

MyPosts All Forum Topic
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
08-24-2008 02:29 PM  12 years ago
"Cam"

rrKey Veteran

UK

MyPosts All Forum Topic
I was looking at it from a vertical-to-earth point of view because I have to draw this on CAD the same way up as the rest of the heli, not parallel to that slanted bit on the frame. (green line)

Thanks for trying Steve.

X-and-Y Shown again here on the left photo: maybe more clear.

Hopefully the Green Line will make what I mean clear.

13mm - I don't need the pylon post location (even then I would need two measurements relative to something) - I even have to make my own canopy. Thanks Though.
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
08-24-2008 02:38 PM  12 years ago
steve 01

rrProfessor

Grand Rapids MI

MyPosts All Forum Topic
13mm is that dimension
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
08-24-2008 02:50 PM  12 years ago
"Cam"

rrKey Veteran

UK

MyPosts All Forum Topic
You've measured "Y" as parallel to the edge of the frame which was what I meant as "diagonal". I need it Y as parallel to vertical - along the same axis as the main mast.
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
08-24-2008 03:27 PM  12 years ago
steve 01

rrProfessor

Grand Rapids MI

MyPosts All Forum Topic
Here ya go

SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
08-24-2008 04:36 PM  12 years ago
"Cam"

rrKey Veteran

UK

MyPosts All Forum Topic
Steve thank you

24mm looks right

The Y length I want is NOT 39.40 !!!

You measured this:

I need this:

SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
08-25-2008 10:40 AM  12 years ago
"Cam"

rrKey Veteran

UK

MyPosts All Forum Topic
Still need that last measurement.
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
WATCH
 2 pages [ <<    <    ( 1 )     2     NEXT    >> ] 1270 views Post Reply
Home✈️Aircraft🚁HelicopterThunder TigerRAPTOR 90 › Bearing Block to Boom Brace Distance?
Print TOPIC

 0  Topic Subscribe

Thursday, October 1 - 8:12 am - Copyright © 2000-2020 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online