RunRyder RC
WATCH
 1 page 569 views Post Reply
HomeRC & Power✈️Aircraft🚁Helicoptere-Electric Motors-Controllers-ESCOther › The New SETRPM version on CC HV esc
08-21-2008 02:35 PM  12 years ago
Topic Vote0Post 1
NFFD

rrApprentice

B.C. , Canada

MyPosts All Forum Topic
The New SETRPM version on CC HV esc
I have a question, might be silly but have to ask it.

On the New SETRPM version on the CC esc, you can set 3 different HS with with your idleup's. HS 1 is throttle inputs at less than 50%, HS 2 is throttle inputs between 50%-99%, and HS 3 is inputs above 99%.

When your in the vehicle setup information window, you put in your motor, battery , gearing information, and tell what HS's you want to run at.

My question is when you put in the HS you want, do you set throttle in put to 49% for idleup1 and the esc will gov the HS at what you have put in, or do you have have to dial up, until you get to HS you want?

Hope that makes sense.

Right now I have put in a HS of 1850 for idleup1 at throttle input of 49%, but my HS is around 2150, I have to dial down to around 25% to get the 1850-1900HS.

Thanks for your input

Curtis
Sorry Sir!, But Visa's saying We need to destroy the Card!!
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
08-21-2008 10:37 PM  12 years ago
MrMel

rrProfessor

Gotland

MyPosts All Forum Topic
You need to program your endpoints in the radio to match the CC controller to get it at 0-50, 50-99, 100.

Right now 49% in your radio isnt 49% in the CC ESC if you understand what I mean.

Nothing wrong really, you can run 25% on the radio..
Might be that your 100% is too low though, so you never can get there.
Gone fishing..or hunting..or something
My site: http://heli.dacsa.net - VBar videos and more
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
08-21-2008 11:47 PM  12 years ago
NFFD

rrApprentice

B.C. , Canada

MyPosts All Forum Topic
MrMel

I understand what you mean, How do I match up the endpoints for the TX, and ESC?

Thanks

Curtis
Sorry Sir!, But Visa's saying We need to destroy the Card!!
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
08-21-2008 11:54 PM  12 years ago
MrMel

rrProfessor

Gotland

MyPosts All Forum Topic
Dont rememeber off hand exact procedure, but head over to heli.freak site and check out Bobs videos, there is a video for how to do it.Gone fishing..or hunting..or something
My site: http://heli.dacsa.net - VBar videos and more
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
08-22-2008 12:03 AM  12 years ago
NFFD

rrApprentice

B.C. , Canada

MyPosts All Forum Topic
Okay, Found the steps on HF, Thanks alot MrMel

Curtis
Sorry Sir!, But Visa's saying We need to destroy the Card!!
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
08-29-2008 03:34 PM  12 years ago
NFFD

rrApprentice

B.C. , Canada

MyPosts All Forum Topic
I posted this question elsewhere, but will ask it here too.

On the 3 desired HS settings for the set Rpm mode. Does the first HS setting read the throttle % in Normal Mode, or in Idleup1?

I have my normal mode at 0,0,0,0,0, then move to idleup1 for spoolup,and flying HS. So for my intended flying HS, I should put this in what line, first line at below 50%, or second line at 50-99% ?
Hope this makes sense

Thanks alot

Curtis
Sorry Sir!, But Visa's saying We need to destroy the Card!!
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
08-29-2008 05:32 PM  12 years ago
NFFD

rrApprentice

B.C. , Canada

MyPosts All Forum Topic
I got my answer from Joe Ford at CC.

It reads the settings in all modes, Normal,idleup1,idleup2.

cheers
Sorry Sir!, But Visa's saying We need to destroy the Card!!
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
WATCH
 1 page 569 views Post Reply
HomeRC & Power✈️Aircraft🚁Helicoptere-Electric Motors-Controllers-ESCOther › The New SETRPM version on CC HV esc
Print TOPIC

 2  Topic Subscribe

Monday, September 28 - 3:02 pm - Copyright © 2000-2020 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online