RunRyder RC
WATCH
 3 pages [ <<    <    ( 1 )     2      3     NEXT    >> ] 2397 views Post Reply
Home✈️Aircraft🚁HelicopterAlignT-REX 600N › My 600 nsp kit just arrived!!(let the insanity begin!!!)
08-21-2008 02:07 AM  12 years ago
Topic Vote0Post 1
RICH.L

rrKey Veteran

gentry arkansas

MyPosts All Forum Topic
My 600 nsp kit just arrived!!(let the insanity begin!!!)
This kit looks SWEET!!

I finally get to put a full kit together from scratch that isn't halfway put together by someone else at a factory!!

The align muffler looks pretty nice and I did some searching and most say the align has almost the same power as the jk hatori sb50 muffler!(not sure if I should try the muffler or sell it and buy the hatori)?

The kit came with align c/f blades,pretty good blades or not??
I will still get some decent radix sb's soon but wanted to know what everyone thinks of the align blades?

thank's
rich
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
08-21-2008 02:27 AM  12 years ago
yoshgixxer

rrVeteran

york PA usa

MyPosts All Forum Topic
the align pipe is killer! i ditched my mp5 for it, i told you you would like the nsp that thing is bad a$$!!!

as far as the align blades, there really nice too! they dont have the pop of a wider cord blade like the 600sb's...but it is really hard to bog the head down with the align blades,i felt more comfortable trying new stuff on the align's cuz i didnt have the fear of killin head speed,you already have it why not give it all a shot!

i should have my 700 tomorrow and that will be my first kit i have to build from scratch! i know how your fealing!
dude..wheres my heli?????ama#902014
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
08-21-2008 02:34 AM  12 years ago
jmiceli11

rrApprentice

Erie, PA, USA

MyPosts All Forum Topic
Just build that thing Rich! And then get it out to field and fly.

John
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
08-21-2008 03:03 AM  12 years ago
w12martin

rrVeteran

Chengdu, Sichuan, China

MyPosts All Forum Topic
BELIEVE ME!!! YOU DON'T NEED TO CHANGE BLADES AND MUFFLER! BOTH ARE TOP NOTCH
SHARE  PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
08-21-2008 07:54 AM  12 years ago
louk05

rrKey Veteran

Flying in BelAir Maryland

MyPosts All Forum Topic
I like the align muffler over the hatori any day. its louder but well worth it. and as for the bladez they are nice as well. yes it is hard to bog the motor down and they still have a great flip and roll rate. If you are just starting then these blades are more than you will need for a long time to come. i cant out fly them but i just love the pop of the cy sb blades. but you will still love them. i would have 3 blades i like 1 cy sb's in number 1 then rotor tech 610's then the d blades. i like them more than my v blade tst's
So just fly them you cant go wrong and the nsp is one sweet kit. i have the blue one and love it. its fully upgraded already with nothing left to do but fly it.
Fly Hard,Crash Hard,Upgrade, Align,AMA#906056
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
08-21-2008 07:56 AM  12 years ago
deafheliflyer

rrKey Veteran

Arizona

MyPosts All Forum Topic
hi
Ive flown both.. for the TT engine.. Hatori beats Align hands down.. Sorry

Align is LAME pipe for TT53 redline.
Crash-Prone and overcoming it!!!
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
08-21-2008 08:13 AM  12 years ago
louk05

rrKey Veteran

Flying in BelAir Maryland

MyPosts All Forum Topic
Not sure but it kicks but on the O.S All day long. Align on o.s hands down..
. I have the hatori sb18 on my 700 and cant wait for the Align 90 pipe to come out. i also went from a mp2 to mp5 to hatori to align on my 600 o.s 50 hyper and the hatori is not as loud but not as much power either. so Align all the way.
Fly Hard,Crash Hard,Upgrade, Align,AMA#906056
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
08-21-2008 08:37 AM  12 years ago
yueman

rrNovice

Taiwan,Taipei

MyPosts All Forum Topic
I just a questions. And where did you get 600NSP??

But 600NSP sounds like good about their parts.

Thank for your sharing.
SHARE  PM  EMAIL  HOMEPAGE  Attn:RR  Quote
08-21-2008 08:49 AM  12 years ago
louk05

rrKey Veteran

Flying in BelAir Maryland

MyPosts All Forum Topic
600NSP sound like good about there parts?? Are you asking if the 600NSP has good parts or is it easy to fix or it sounds like they have good parts???.

Yes it has all the best 600 parts on it already. no need to upgrade anything. and yes easy and cheap to fix. Unless you start bending all that nice pretty aluminum up. they have 2 versions blue is what i have and black. You can get them at hobbyhut.com or heliproz.com and plenty more. just go to the home page here on rr and you will see all tge adds you can click on any one and it will take you to the online shop. hope this helps and you can not go wrong with the 600NSP best looking and one of the nicest helis out there.
Fly Hard,Crash Hard,Upgrade, Align,AMA#906056
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
08-21-2008 12:06 PM  12 years ago
RICH.L

rrKey Veteran

gentry arkansas

MyPosts All Forum Topic
I got my nsp combo kit from helihobby for $687!!

I already have the blades and muffler so I am going to give them a try and see how they perform.

I need a voltage drop down from the regulator to my gy601 to go from 6 volts to 4.8 volts,what are people using to drop the voltage down.(this is my first regulator)

I did also order infinivation dampers,the large hitec servo wheels and a swash setup tool.

I still need to get servo's yet and a futaba fasst receiver.

I decided to run the hitec hs6965's on cyclic and throttle,.08 for speed should be plenty fast for me!!

thank's
rich
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
08-22-2008 05:01 AM  12 years ago
HeliSmith

rrVeteran

Chico, CA

MyPosts All Forum Topic
That price was a mistake by the way we had to correct it.

Glad you are happy with your kit you will love how it flies. I love my 600NSP so much..
SHARE  PM  EMAIL  HOMEPAGE  Attn:RR  Quote
08-22-2008 05:18 AM  12 years ago
yoshgixxer

rrVeteran

york PA usa

MyPosts All Forum Topic
align makes a nice little step down for the gyro,i think its like 6 bucksdude..wheres my heli?????ama#902014
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
08-22-2008 08:40 AM  12 years ago
HeliSmith

rrVeteran

Chico, CA

MyPosts All Forum Topic
You may also solder in a rectifier diode. In my tutorial I am using a 1N4001 rectifier diode but please substitute a 3A part such as 1N5404 for this application. Also if you aren't sure you can pull this off first try do it to a servo extension cable instead.

http://www.helismith.com/9257_step_down.htm
SHARE  PM  EMAIL  HOMEPAGE  Attn:RR  Quote
08-22-2008 12:18 PM  12 years ago
RICH.L

rrKey Veteran

gentry arkansas

MyPosts All Forum Topic
helismith,
I know I must have got a killer deal on that nsp kit,I see it is now $787 for the kit from helihobby!!

not only that but when I was pricing out the kit I also checked modefo's and they told me there was no way that kit could only be $687 because that is more than cost,and then he said "I have no idea what they are sending you from helihobby"

well I got exactly what I wanted!!

so I would just solder in the diode on my futaba s9251 servo?

What does the diode do that I don't need a step down?

rich
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
08-22-2008 05:15 PM  12 years ago
HeliSmith

rrVeteran

Chico, CA

MyPosts All Forum Topic
I am going to PM you a link on another forum where they are talking about this.
SHARE  PM  EMAIL  HOMEPAGE  Attn:RR  Quote
08-23-2008 03:05 AM  12 years ago
yoshgixxer

rrVeteran

york PA usa

MyPosts All Forum Topic
hows the build coming along?dude..wheres my heli?????ama#902014
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
08-24-2008 02:10 PM  12 years ago
RICH.L

rrKey Veteran

gentry arkansas

MyPosts All Forum Topic
The build is going SLOWLY!!!

The quality of this NSP kit is outstanding,everything fits just perfect and I don't think I have ever seen this much metal on any of my heli's before!!

The only downfall in my opinion is the instructions SUCK,plain and simple!!

hopefully I can get it going next weekend,my servo's and fasst receiver won't be here until mid week.

I did find an align step down on ebay and that was only $3.99,and that should be here by midweek also!!

I bet this thing is going to fly super,I have never put together such a nice machine before this one!!!

OH well back to the building.

rich
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
08-25-2008 12:08 AM  12 years ago
yoshgixxer

rrVeteran

york PA usa

MyPosts All Forum Topic
yea all align directions suck...there is no instructions other to put lock tite here..or lube there...and some link lengths..other then that its all pictures...dude..wheres my heli?????ama#902014
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
08-29-2008 01:40 AM  12 years ago
RICH.L

rrKey Veteran

gentry arkansas

MyPosts All Forum Topic
My servo's just showed up today and my align step down will be here on friday!!

I sure hope things work out so I can get the heli going over the holiday weekend.

Any tips for installing the clutch?

I noticed that you don't use the nut from the engine just the two screws on the clutch hub.

Are the align blades already balanced or do I need to balance them?

Man I can't wait to try this thing out,it looks so well put together it's not even funny!!

rich
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
08-29-2008 03:08 AM  12 years ago
yoshgixxer

rrVeteran

york PA usa

MyPosts All Forum Topic
use the clutch nut!!!crank down the clutch nut first to drawn the hub down on the engine so it pulls the crank off the back plate,then tighten the lock screws,once you get the engine slid in just make sure you can spin the bell with out it touching the clutch,also this would be a good time to mount your gov sensor,mount the sensor and slide the engine in with the fan on,but WITH OUT the fan shroud so you can see if the magnet is going directly over the sensor with a 1-2mm gap

i checked my D blades and they were good, they should not need balanced but i would check em jsut to make sure
dude..wheres my heli?????ama#902014
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
WATCH
 3 pages [ <<    <    ( 1 )     2      3     NEXT    >> ] 2397 views Post Reply
Home✈️Aircraft🚁HelicopterAlignT-REX 600N › My 600 nsp kit just arrived!!(let the insanity begin!!!)
Print TOPIC

 8  Topic Subscribe

Saturday, September 26 - 3:30 pm - Copyright © 2000-2020 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online