I have enclosed several close ups of my Raptor wiring routing.
Photo 1- Raptor 60 w/70 OS motor routing..
Photo 2- Raptor 30 w/37 OS motor (Non 2.4 w/ JR 770 JR receiver)
(this is the oldest helo in the fleet...)
Photo 3= Raptor 50 Titan muffler side and receiver/battery
Now All Raptors are pretty much the same, no matter what size!
Your best bet is to run the wiring where it is not too tight!
The next thing--- BEFORE the "Anti-Zip Tie" crowd jumps in
that the Raptors in the photos are regularly
taken apart for
maintenance due to the stress's put on them.
As Dood said:
Remember to use fuel line for Anti-Chaffing or rubbing issues.
Use Velcro or zip tie protection if you do not regularly take
the helo apart for service/maintenance/inspections.........
Additionally all Gyros are mounted on the rear of mainshaft..
I hope the photos help and upload some of yours when your done
to see how it looks..