RunRyder RC
WATCH
 11 pages [ <<    <     9      10     ( 11 )    >    >> ] 13801 views Post Reply
08-19-2008 03:05 AM  12 years ago
Horacio

rrVeteran

CA

MyPosts All Forum Topic
kcordell-

I see the 6 cell escs are readily avaiable, I thought you were referring to the new 4 cell, thats the one I'm after.

http://www.runryder.com/t446328p1/
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
08-19-2008 03:08 AM  12 years ago
THX1138

rrElite Veteran

Indianapolis, IN

MyPosts All Forum Topic
The new CC firmware really does make a big difference. I think I am gonna try the CC45 on mine. I think if I keep the collective pitch down to like 12deg or so it shouldn't spike the amps too much and it will still fly like a banshee!

Lou
Just give me five dudes and two flashbangs...
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
08-21-2008 02:55 AM  12 years ago
Horacio

rrVeteran

CA

MyPosts All Forum Topic
http://www.runryder.com/t454161p1/

Looks like it wasn't just my kit.
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
08-26-2008 04:25 AM  12 years ago
Horacio

rrVeteran

CA

MyPosts All Forum Topic
Just managed to strip the set screw hole in my 11 tooth pinion. Anyone in Cali want to sell theirs? I dont want to wait until the end of the week to get it from MA.
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
08-26-2008 04:34 AM  12 years ago
bparro

rrVeteran

indianapolis,in

MyPosts All Forum Topic
you can try to use green locktite to glue it on without the set screw.
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
08-26-2008 04:53 AM  12 years ago
laddy

rrVeteran

Midland Texas

MyPosts All Forum Topic
I did the same thing. A RevCo 11T pinon gear will fit it. It is tall enough
http://www.readyheli.com/RevCo_Hard...n_p/ho-1011.htm
Texas
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
08-26-2008 06:34 AM  12 years ago
skidzup

rrNovice

visalia CA 93277

MyPosts All Forum Topic
Horacio,If you need it PM me with an address and I can send it out u.s.p.s in the morning.I have both pinions un-used as I am using a 2700 kv motor with a 15 tooth pinion for 3200 headspeed. Works sweet!!All these micros somehow turned my 450 into my BIG machine!?!?!?
SHARE  PM  EMAIL  Attn:RR  Quote
08-26-2008 03:20 PM  12 years ago
Horacio

rrVeteran

CA

MyPosts All Forum Topic
skidz-

I appreciate the offer. Just decided to get the Revco one as I needed some other stuff from RH.

Thanks
Tim
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
08-26-2008 04:18 PM  12 years ago
skidzup

rrNovice

visalia CA 93277

MyPosts All Forum Topic
Good deal.All these micros somehow turned my 450 into my BIG machine!?!?!?
SHARE  PM  EMAIL  Attn:RR  Quote
08-26-2008 11:49 PM  12 years ago
ddavison

rrVeteran

Brownsville, Pennsylvania

MyPosts All Forum Topic
Another option is to drill straight through the existing set screw hole and tap threads in the new hole for the set screw. it works I did it rather than wait for the new gear.DaveDavison,GasGob,WhiplashGas,Spectra,JRXG11MV,12X
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
08-27-2008 02:32 AM  12 years ago
buster1

rrKey Veteran

Manhattan, NY

MyPosts All Forum Topic
or just dremel a notch in the head of the set screw and use a small screw driver to remove it - done this numerous times before,
Jeff
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
08-27-2008 02:33 AM  12 years ago
HFG

rrApprentice

Toronto, Canada

MyPosts All Forum Topic
Pinion is stuck ..... sounds like the whole kit is a right off , buy a new kit
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
08-30-2008 01:42 AM  12 years ago
Horacio

rrVeteran

CA

MyPosts All Forum Topic
Just got my pinion, now I have a Hard One!

Went to mount the motor...the wires seem to rub against the frame. Are you guys just dealing with it?
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
08-30-2008 04:23 AM  12 years ago
kcordell

rrElite Veteran

O Fallon, MO

MyPosts All Forum Topic
Motor wires were difficult. Mine are bent against the frame too.
As long as they don't chafe, no problem. If you look at my motor from underneath, it is not mounted square across the frame. That isn't a problem at all and a way to get the wires out of the way a little bit.
Team Synergy/Rail, Team Scorpion, YS Engines, VelTye
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
08-30-2008 06:14 AM  12 years ago
Horacio

rrVeteran

CA

MyPosts All Forum Topic
cool thanks.
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
WATCH
 11 pages [ <<    <     9      10     ( 11 )    >    >> ] 13801 views Post Reply
Print TOPIC

 15  Topic Subscribe

Thursday, September 24 - 3:21 am - Copyright © 2000-2020 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online