RunRyder RC
 4  Topic Subscribe
WATCH
 2 pages [ <<    <    ( 1 )     2     NEXT    >> ] 1651 views TOPIC CLOSED
HomeAircraftHelicopter
e-
Mikado
Other › logo 10 running gear
03-09-2008 10:39 AM  10 years agoPost 1
jjh23

rrApprentice

great britain, south west

My Posts: All  Forum  Topic

ive tried to sell my logo but nobody seems to want it so im going to keep it and upgrade the running gear and keep it, im going to get some 6s packs and change the motor to a century 600+ and
i was thinking about using a align ESC, although im not sure the servos will be upto the extra power they are jr nes-331 servos,
ive got a CSM560 micro gyro with a jr8700g tail servo so that is ok
any thoughts on the 331, what is a good servo to use for cyclic

PM  EMAIL  GALLERY  Attn:RR
03-09-2008 09:16 PM  10 years agoPost 2
jjh23

rrApprentice

great britain, south west

My Posts: All  Forum  Topic

ive done a search for the 3421's but none of my suppliers keep them.

any help would be nice

PM  EMAIL  GALLERY  Attn:RR
03-09-2008 09:51 PM  10 years agoPost 3
TOSH

rrElite Veteran

UK.Peterborough

My Posts: All  Forum  Topic

http://www.espritmodel.com/index.as...TS&Category=153

Here`s your servos

http://runryder.com/t414637p1/

Here`s your motor and you can trust this bloke 100%. l`d get it now at the price it wont be there long.

Flybars. Who needs `em.

PM  EMAIL  GALLERY  Attn:RR
03-09-2008 09:53 PM  10 years agoPost 4
TOSH

rrElite Veteran

UK.Peterborough

My Posts: All  Forum  Topic

OH
and that gyro and tail servo work very well in the logo 10.

Flybars. Who needs `em.

PM  EMAIL  GALLERY  Attn:RR
03-09-2008 10:40 PM  10 years agoPost 5
jjh23

rrApprentice

great britain, south west

My Posts: All  Forum  Topic

excellent thanks tosh i have sent him a PM just sit and wait now

as for those servos will i need anything else to connect them up as my current servos are just bottom dollar and the 9650's are didgital

PM  EMAIL  GALLERY  Attn:RR
03-09-2008 10:54 PM  10 years agoPost 6
TOSH

rrElite Veteran

UK.Peterborough

My Posts: All  Forum  Topic

No worries, they work just the same.

Flybars. Who needs `em.

PM  EMAIL  GALLERY  Attn:RR
03-09-2008 10:59 PM  10 years agoPost 7
jjh23

rrApprentice

great britain, south west

My Posts: All  Forum  Topic

that motor had already gone

think i will order 1 from midland if they got them in stock,

PM  EMAIL  GALLERY  Attn:RR
03-18-2008 08:48 PM  10 years agoPost 8
Pyrock

rrKey Veteran

SF Bay Area

My Posts: All  Forum  Topic

You may want to consider upgrading your gears to Mod .7 and make it bulletproof. It's pretty straight forward and gives you that piece of mind.

Trex 500, Stretched Logo 10 3D, Ion-X, Gaui 200

PM  EMAIL  GALLERY  Attn:RR
03-18-2008 09:18 PM  10 years agoPost 9
Jag72

rrProfessor

South of Boston

My Posts: All  Forum  Topic

Logo
The Century 600 plus is a GREAT motor for that logo 10 on 6s...As everyone here probably already knows...I use them on all my logo 10's and love them..

The servos to get are either the 3421's or the futaba 9650's ...or the Hitec 5245's...but I would get the jr's or futaba's first if possible..

I use the Hitec 5245's in one machine but wouldn't really recommend them due to some inherent issues with these servos.

The Align 75A esc is perfect...that exactly what I am using on 3 of my machines...

as TOSH already stated...that gyro and tail servo are perfect for the logo as well..

here's mine..of course I packed full sized servos into my logo 10 though..

BTW...pyrock is right...the .7mod does make life easier on this setup..

Anthony

PM  EMAIL  GALLERY  Attn:RR
03-18-2008 09:40 PM  10 years agoPost 10
TOSH

rrElite Veteran

UK.Peterborough

My Posts: All  Forum  Topic

l`ve added a couple of braces to the battery tray on mine.

Flybars. Who needs `em.

PM  EMAIL  GALLERY  Attn:RR
03-18-2008 09:42 PM  10 years agoPost 11
Jag72

rrProfessor

South of Boston

My Posts: All  Forum  Topic

TOSH
Good Idea man....

BTW...what ESC is that you're using?

PM  EMAIL  GALLERY  Attn:RR
03-18-2008 09:45 PM  10 years agoPost 12
TOSH

rrElite Veteran

UK.Peterborough

My Posts: All  Forum  Topic

Jag
That`s a Jazz 80 in disguise and a dawn mist bec l got some time ago.

Flybars. Who needs `em.

PM  EMAIL  GALLERY  Attn:RR
03-18-2008 10:22 PM  10 years agoPost 13
jjh23

rrApprentice

great britain, south west

My Posts: All  Forum  Topic

well here it is at the moment, im going to get ordering soon, hopefully will see a big difference,
im going to get the century 600+, align ESC, and i will probably go with the 9650's, and wait for a big improvement

PM  EMAIL  GALLERY  Attn:RR
03-19-2008 02:37 PM  10 years agoPost 14
Jag72

rrProfessor

South of Boston

My Posts: All  Forum  Topic

Logo
Hey man...you should REALLY think about upgrading that head to the newer LLS style and maybe getting a metal swashplate to boot...

The new head and metal swash will make a huge difference onthat machine..

PM  EMAIL  GALLERY  Attn:RR
06-15-2008 08:23 PM  10 years agoPost 15
jjh23

rrApprentice

great britain, south west

My Posts: All  Forum  Topic

right here i am again

im at last going to order some bits for my logo 10
a 75amp align ESC and century 600+ motor

im going with 5 cell li-po's, would a 21 tooth pinion be ok for forward flight , no 3d yet

as for servo's i want to go with the hitec 5254's cos of price, havent got enought for the 9650's
what are the hitec's like, jag72 you say you had a couple problems with these???

PM  EMAIL  GALLERY  Attn:RR
06-15-2008 09:26 PM  10 years agoPost 16
norsman

rrKey Veteran

paradise PA

My Posts: All  Forum  Topic

I just went with all that ,century motor,align esc and a 20t pinnion on my logo10.And just bouight a 5c evolight 4350 for it.Need any help seekout the one they call Jag he is the logomaster PS jag goto my post and tell me what went wrong

PM  EMAIL  GALLERY  Attn:RR
06-15-2008 11:44 PM  10 years agoPost 17
jjh23

rrApprentice

great britain, south west

My Posts: All  Forum  Topic

norsman
what flight times you getting??

i wasnt sure what pinion to order, i remember reading somewhere about the 21 tooth,
what servo's are you useing, not the hitec's by any chance

PM  EMAIL  GALLERY  Attn:RR
06-16-2008 12:12 AM  10 years agoPost 18
norsman

rrKey Veteran

paradise PA

My Posts: All  Forum  Topic

Well mine came with a hacker C50 motor and hackermaster,which logo master Jag told me to trash and buy the century with the 75amp align esc.6cell's should run 20t pinnion and 5cell should be 21t but I plane on trying my 20t with a 5cell I just bought.My servo's are JR 3421's and I've never had a problem,on my tail is a futaba 9253. Lars

PM  EMAIL  GALLERY  Attn:RR
06-16-2008 12:19 AM  10 years agoPost 19
norsman

rrKey Veteran

paradise PA

My Posts: All  Forum  Topic

I will say this JJ,this is my first full size electric heli and with my hacker motor ,when you nailed it hard it would shake hard climing,I thought it was to much motorbut now with this century it's the same.When I hit it hard I get a violent shake from nose to tail bad.So I run a 80% idle up and it's smooth and shake free.maybe it's the 6cell I'm running??

PM  EMAIL  GALLERY  Attn:RR
06-16-2008 06:51 PM  10 years agoPost 20
jjh23

rrApprentice

great britain, south west

My Posts: All  Forum  Topic

i see , well ive sold my trex 450 to fund some better parts in the logo, nose to tail shake is too low a headspeed, i cant find the 3421's in the uk,
im going to get the 600+ motor and align ESC, i will order a 21 pinion then
i would like to find out a bit more about the hitec servo's

what sort of times you getting, although i cant really compare it to the 450 but i was getting 6 minutes and putting 70% back in the packs on the 450, if i can get that time with the logo i will be more than happy

PM  EMAIL  GALLERY  Attn:RR
WATCH
 2 pages [ <<    <    ( 1 )     2     NEXT    >> ] 1651 views TOPIC CLOSED
HomeAircraftHelicopter
e-
Mikado
Other › logo 10 running gear
 Print TOPIC  Make Suggestion 

 4  Topic Subscribe

Thursday, June 21 - 7:57 am - Copyright © 2000-2018 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online