RunRyder RC
 1  Topic Subscribe
WATCH
 1 page 672 views POST REPLY
HomeAircraftHelicopter
e-
Blade
Blade 400 › 3D ds285 servo install problems
03-08-2008 10:36 AM  10 years agoPost 1
grumpyoldman

rrNovice

perth Western Australia

My Posts: All  Forum  Topic

Hi all,

just installed 3 ds285 servos, now it wont initialise(gyro led keeps blinking)
Do i have to rebind it to the dx6i.
Need some information on where the servos are plugged in to the AR6100
I replaced one servo at a time so i am confident i have plugged them in to the right channel
but would like to confirm. Also colours on the DS285 servo leads are orange/red/green
Stock servos are orange/red/black am i right in presuming the orientation is green to the bottom of AR61100

thanks

grumpy

PM  EMAIL  GALLERY  Attn:RR  Quote
03-08-2008 11:11 AM  10 years agoPost 2
grumpyoldman

rrNovice

perth Western Australia

My Posts: All  Forum  Topic

servo update
just realised, does the tail servo have to be changed as well ( all digital servos)

thanks

PM  EMAIL  GALLERY  Attn:RR  Quote
03-08-2008 01:38 PM  10 years agoPost 3
whirlydude

rrApprentice

USA

My Posts: All  Forum  Topic

Yes, I would try re-binding. I have noticed when changes things in and out it works best to re-bind afterwards. No, you do not have to change your tail servo out. As long as the 3 servos going to the swash are the same thats all that matters. Your tail servo can be whatever you perfer. As far as the receiver,I leave 1 empty for binding, 2 esc, 3 ail (left rear servo) 4 elev, 5 rudd, 6 gyro lead, 7 pitch servo (right rear) The colors on the wiring for servos differ, but white is signal-top, red-positive, black-ground is bottom. Some are orange red and black, some are orange red and brown. My gyro is green red and black with a yellow lead. Do control tests to make sure everything is working properly, before hooking up the motor. Hope this helped,& Happy Flyin!

PM  EMAIL  Attn:RR  Quote
WATCH
 1 page 672 views POST REPLY
HomeAircraftHelicopter
e-
Blade
Blade 400 › 3D ds285 servo install problems
 Print TOPIC  Make Suggestion 

 1  Topic Subscribe

Tuesday, June 19 - 4:15 am - Copyright © 2000-2018 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online