RunRyder RC
 4  Topic Subscribe
WATCH
 1 page 946 views POST REPLY
HomeAircraftHelicopter
e-
Align
T-REX 500 › Scorpion 3026-1900KV for 5S as compared to Align 500-1600KV
03-07-2008 10:13 PM  10 years agoPost 1
SpeedJunk

rrApprentice

Brisbane, California

My Posts: All  Forum  Topic

I am going to use TP3300 5SXV for my 500. I like the Align 500-1600KV great power with 6S. Would like to know if Scorpion 3026-1900KV has better performance with 5S setup. WIll also add a light weight onboard digital camcorder. Thanks for feedbacks. Have a great week-end to all.

PM  EMAIL  Attn:RR  Quote
03-07-2008 11:20 PM  10 years agoPost 2
LoveMyTrex

rrVeteran

Hamilton,VA

My Posts: All  Forum  Topic

I would think the scorpion 1900kv would have pretty good power on 5s, probably quite a bit better then the stock on 5s. maybe comprobable to stock on 6s.

this is based on what I have read here about how powerfull scorpion motors are, and much pouring over the motor stats listed on the inov8tive designs site.

I wish align would make a proper list of data on the 500 motor like the scopions due

600N 55HZ/SAB-55 600V's
700N 91HZ/SB-20 690V2 V's
90SG 91HZ/SB-20 710V2 V's

PM  EMAIL  GALLERY  Attn:RR  Quote
03-08-2008 08:52 AM  10 years agoPost 3
dkfuji

rrApprentice

The O.C., CA

My Posts: All  Forum  Topic

I am running a Scorpion 3026 1900kv on 6s with 12t pinion. At 85% throttle I got over 4 mins of mild 3d (before tail failure) and burying it at local park this morning. When I charged the battery I put back 1137 into the FP2500. Motor has awesome performance (for the price) and very efficient. On 5s, you will have to run 13t or 14t with the Scorpion. You'll need 14t or 15t with the Align to get similar headspeed but the Scorpion will have more climb out power and less bog under full load.

Fly hard, have fun and take it home in one piece...

PM  EMAIL  GALLERY  Attn:RR  Quote
03-08-2008 10:46 PM  10 years agoPost 4
SpeedJunk

rrApprentice

Brisbane, California

My Posts: All  Forum  Topic

Thanks for the info. As for the mishap, it happens to most of us all the time as long as you push to learn more aggressive moves and that is why we fly them. I also understand it hurts when you open your wallet for the parts, meanwhile, Align is more then happy to furnish us more parts. I'll get the 1900KV from innov8tives when they back to stock.

PM  EMAIL  Attn:RR  Quote
03-08-2008 11:17 PM  10 years agoPost 5
docjoe

rrElite Veteran

Stockton, CA United States

My Posts: All  Forum  Topic

I have been using the Scorpion 3025-1600kv on 6s with my Trex 500 and this is a big improvement over my stock motor. It comes down cool after 4 minutes of near continuous hard 3D and aggressive flying. The ESC is also cool. I'm running a 15T pinion at about 85% throttle curve in Idle Up. This motor rocks! The 1900 is supposed to be very good on 5s.

Joe
We haven't seen Colonel Angus around these parts for years!

PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
WATCH
 1 page 946 views POST REPLY
HomeAircraftHelicopter
e-
Align
T-REX 500 › Scorpion 3026-1900KV for 5S as compared to Align 500-1600KV
 Print TOPIC  Make Suggestion 

 4  Topic Subscribe

Friday, June 22 - 9:28 pm - Copyright © 2000-2018 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online