RunRyder RC
 2  Topic Subscribe
WATCH
 1 page 782 views POST REPLY
HomeAircraftHelicopter
e-
Thunder Tiger
Raptor E325 › Mounting e325 Electronics
03-06-2008 05:36 AM  10 years agoPost 1
TheMan

rrNovice

Edmonton, Alberta, Canada

My Posts: All  Forum  Topic

Anyone out there with photos of the e325 stock TT motor and ESC mounting? I'm just at the point of mounting mine but want to do it right.

Thanks.

PM  EMAIL  Attn:RR  Quote
03-06-2008 02:40 PM  10 years agoPost 2
redvtr1000

rrVeteran

covington, GA

My Posts: All  Forum  Topic

Pretty hard to screw this part up after you get to looking at it though it probably won't feel right because of the way the plate mounts and the wires exit the motor.

I don't have a photo but I could take one later if you really need it. Basically, the wires on the motor will exit just over the screw hole on the left side(iirc) if you assemble per the manual, I've seen posts that say you can flip the plate over and get the wires to run out in front and go right under the battery tray. I have my esc mounted on the base plate of the frame underneath the battery, light pressure from a couple zip ties holds it in place.

I mount my batteries with the leads facing the nose of the heli, I will then pass them back under the battery tray in the opening underneath the tray on the front. Then, my battery and esc plug together underneath the tray and that keeps the wires from interfering with putting the cano on.

PM  EMAIL  GALLERY  Attn:RR  Quote
03-06-2008 02:59 PM  10 years agoPost 3
Dr Lodge

rrElite Veteran

Guildford, Surrey - UK

My Posts: All  Forum  Topic

That sounds exactly like my setup too. IIRC my ESC is positioned so the wires to the ESC are at the front, and those going to the battery are nearest the motor.

Vibe 90, Vibe 50, Vigor CS x2,
Dyna-x, Knight 503D, Logo 10,
TRex 500, Furion, Gaui EP200

PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
03-08-2008 03:15 PM  10 years agoPost 4
Coolpowered

rrKey Veteran

Youngstown, ohio

My Posts: All  Forum  Topic

Check my gallery, there are a few pics of the mini without the canopy.

YRCHA CLUB MEMBER

PM  EMAIL  GALLERY  Attn:RR  Quote
03-08-2008 04:39 PM  10 years agoPost 5
Tradhunt

rrKey Veteran

Fairfield, Ca. USA

My Posts: All  Forum  Topic

I've alway's mounted mine like this....

PM  EMAIL  GALLERY  Attn:RR  Quote
03-09-2008 06:01 PM  10 years agoPost 6
hotairflyer

rrApprentice

Northern AZ

My Posts: All  Forum  Topic

I like your setup tradhunt, very clean!

Lama2,T-rex, Mini Titan, BL-BCPP, B400, PicooZ

PM  EMAIL  HOMEPAGE  Attn:RR  Quote
03-09-2008 06:14 PM  10 years agoPost 7
Tradhunt

rrKey Veteran

Fairfield, Ca. USA

My Posts: All  Forum  Topic

Thanks, Ya I like it mounted that way keep's everything out of the way but it still lets you get to the motor wire's to do some work or whatever.

PM  EMAIL  GALLERY  Attn:RR  Quote
WATCH
 1 page 782 views POST REPLY
HomeAircraftHelicopter
e-
Thunder Tiger
Raptor E325 › Mounting e325 Electronics
 Print TOPIC  Make Suggestion 

 2  Topic Subscribe

Sunday, June 24 - 12:15 pm - Copyright © 2000-2018 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online