RunRyder RC
 2  Topic Subscribe
WATCH
 1 page 484 views POST REPLY
HomeAircraftHelicopterRadio - Servo - Gyro - Gov - Batt › Radio problem question Futaba
03-05-2008 02:13 AM  10 years agoPost 1
alien

rrApprentice

Middletown N.Y.

My Posts: All  Forum  Topic

Hi everone I have a Futaba 9ch super heli radio and when I throttle up with the throttle stick it has to move at least 2 1/2 lines before it starts to engage the throttle once past that point it works fine. Also when it gets to that point when throttle down it disengages at the same point it has a little bit to go to reach the bottom. Can any one out there maybe knows what could be wrong. And could it be in the gimble throttle stick or maybe in its program. I did check my atv and other parts of the program and I did not notice anything or maybe I am missing somthing. Hopefully some one out there knows. Thank You.

PM  EMAIL  GALLERY  Attn:RR  Quote
03-05-2008 03:20 AM  10 years agoPost 2
Ken Filloon

rrVeteran

Highland, Michigan

My Posts: All  Forum  Topic

Check your throttle curve settings.

PM  EMAIL  GALLERY  Attn:RR  Quote
03-05-2008 04:30 AM  10 years agoPost 3
idigrc2

rrVeteran

Chico, CA

My Posts: All  Forum  Topic

inh the three knobs in the middle, one changes the throttle curve and the other one does the pitch and see if that helps

I once choked a smurf to see what color it would trun

PM  EMAIL  GALLERY  Attn:RR  Quote
03-05-2008 06:56 AM  10 years agoPost 4
alien

rrApprentice

Middletown N.Y.

My Posts: All  Forum  Topic

Hi Kfilloon I went to my throttle curves and reset them and also played with delay and also throttle trims and also regular trim and now the throttle stick is now working the way it should I now have Full throttle both ways. I dont know which one did it although I think it was the curves. Anyway thank you for giveing me that surgestion. I also did check the 3 middle knobs like idigrc2 said Too and reset them too. Again Thank you Guys.

PM  EMAIL  GALLERY  Attn:RR  Quote
03-05-2008 12:07 PM  10 years agoPost 5
pH7

rrKey Veteran

Sterling Heights, MI - USA

My Posts: All  Forum  Topic

On a super, you also want to INHibit the two sliders on the side of the transmitter.

PM  EMAIL  GALLERY  Attn:RR  Quote
03-05-2008 03:30 PM  10 years agoPost 6
BarracudaHockey

rrMaster

Jacksonville FL

My Posts: All  Forum  Topic

You want to inhibit both the knobs and on the super the sliders.

Andy
AMA 77227
http://www.jaxrc.com

PM  EMAIL  GALLERY  Attn:RR  Quote
WATCH
 1 page 484 views POST REPLY
HomeAircraftHelicopterRadio - Servo - Gyro - Gov - Batt › Radio problem question Futaba
 Print TOPIC  Make Suggestion 

 2  Topic Subscribe

Wednesday, June 20 - 12:34 am - Copyright © 2000-2018 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online