RunRyder RC
 9  Topic Subscribe
WATCH
 2 pages [ <<    <     1     ( 2 )    >    >> ] 2949 views POST REPLY
HomeAircraftHelicopterThunder TigerRAPTOR 50 › Wires, wires, wires
03-08-2008 06:29 AM  10 years agoPost 21
legoman67

rrElite Veteran

Nanoose Bay B.C, Canada

My Posts: All  Forum  Topic

Legoman
The 611 is inside a half of a reciever crash box the other half is on the other side holding the GV-1. there is plexi with holes cut out so you can still push the buttons one the 611 and GV-1.

you can find the boxes at heliproz or you can also pick up a project box at radio shack.
that is a great idea, i may just have to try that...

OK HELI, how do you get your wire inside the fuel line? do you cut the connectors off?

PM  EMAIL  GALLERY  Attn:RR  Quote
03-08-2008 03:17 PM  10 years agoPost 22
OK HELI

rrApprentice

Billings, Montana - USA

My Posts: All  Forum  Topic

the wires aren't inside the fuel line. take a piece of fuel line about 1 in. and slide it on a zip tie then ziptie around the wires, slide the end of the ziptie through a hole and take another ziptie and slide it on the end of the first one to keep it in the hole.
the blue is heat shrink and it was a pain to slide it on without taking off the connectors but it was possible.heres some pics.sorry theyre not as clear.
the first one is attached to the frame and the sec. is just wrapping the wires together. the fuel line just makes for a nice cushion so there is no cutting into the wires.

Raptor 50 Titan with DX7, GY401, and TT Redline 53 is Awsome!

PM  EMAIL  GALLERY  Attn:RR  Quote
03-09-2008 10:53 PM  10 years agoPost 23
andythilo

rrApprentice

Saffron Walden, Essex, UK

My Posts: All  Forum  Topic

Here's my R50 before I had to sell it. I hate messy wiring.

PM  EMAIL  GALLERY  Attn:RR  Quote
03-10-2008 02:58 AM  10 years agoPost 24
craigjag1612

rrNovice

Staunton, va

My Posts: All  Forum  Topic

My R30
I hid the wires on the backside of the frame.

[/img]

[/img]

Craig:

PM  EMAIL  GALLERY  Attn:RR  Quote
03-10-2008 03:08 AM  10 years agoPost 25
OK HELI

rrApprentice

Billings, Montana - USA

My Posts: All  Forum  Topic

craig
how did you avoid the belt and gear running it down the backside..I wanted to do that but I was to worried about the belt and belt pulleys.

Raptor 50 Titan with DX7, GY401, and TT Redline 53 is Awsome!

PM  EMAIL  GALLERY  Attn:RR  Quote
03-10-2008 03:19 AM  10 years agoPost 26
craigjag1612

rrNovice

Staunton, va

My Posts: All  Forum  Topic

wires
I drilled several small holes in the frame big enough to put zip ties into. I kept the wires real close to the frame to avoid the gears ect. You just have to be carefull and watch where you zip tie them to, to keep the wires out of the way.

Craig:

PM  EMAIL  GALLERY  Attn:RR  Quote
03-12-2008 11:04 AM  10 years agoPost 27
pgrandao

rrNovice

Portugal

My Posts: All  Forum  Topic

My Ratpor 30




PM  EMAIL  Attn:RR  Quote
WATCH
 2 pages [ <<    <     1     ( 2 )    >    >> ] 2949 views POST REPLY
HomeAircraftHelicopterThunder TigerRAPTOR 50 › Wires, wires, wires
 Print TOPIC  Make Suggestion 

 9  Topic Subscribe

Thursday, June 21 - 7:23 pm - Copyright © 2000-2018 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online