RunRyder RC
WATCH
 2 pages [ <<    <    ( 1 )     2     NEXT    >> ] 1386 views POST REPLY
HomeAircraftHelicopter
e-
Align
T-REX 500 › GY611+9256
02-07-2008 08:42 PM  10 years agoPost 1
trexflyer2003

rrVeteran

northridge ca,91324

My Posts: All  Forum  Topic

Does anybody use GY611+9256 on your T500?
If yes. Do you have any problem with CG?

I plan to switch to this combo and I use 2 FP2170mA packs.

Thanks

PM  EMAIL  GALLERY  Attn:RR  Quote
02-08-2008 09:42 PM  10 years agoPost 2
niz

rrNovice

brunei

My Posts: All  Forum  Topic

T500 gy611 9256
I use gy611 9256 w 600ep tail servo plate mounted on the 500 tail servo mount.. Gain 37% 3dmod .. Fp2500 3s1p x2.. Everytngs perfect!

PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
02-09-2008 12:31 AM  10 years agoPost 3
trexflyer2003

rrVeteran

northridge ca,91324

My Posts: All  Forum  Topic

Thanks niz

I am using 2 FP 2170 packs. Right now, I use 9650 on tail and I have to locate the packs all the way down. I am afraid I will have a CG issue with tail heavy.

thanks

PM  EMAIL  GALLERY  Attn:RR  Quote
02-09-2008 12:49 AM  10 years agoPost 4
gixxernoob

rrApprentice

fairfax, va

My Posts: All  Forum  Topic

I use Logictech 6100T/6100G combo that was intended for the T600 but I'm using it on my T500 w/o issues on CG. I'm using (2) AirThunder Packs over and under configuration.


M's Ichiro (51)

PM  EMAIL  GALLERY  Attn:RR  Quote
02-09-2008 02:50 AM  10 years agoPost 5
Paul Susbauer

rrApprentice

Hillsboro, OR

My Posts: All  Forum  Topic

Yup, using that gyro/servo w/o issues. 5S 4000 Maxamps pack.

Ineptitude - If you can't learn to do something well, learn to enjoy doing it poorly.

PM  EMAIL  GALLERY  Attn:RR  Quote
02-09-2008 03:53 AM  10 years agoPost 6
trexflyer2003

rrVeteran

northridge ca,91324

My Posts: All  Forum  Topic

I use Logictech 6100T/6100G combo that was intended for the T600 but I'm using it on my T500 w/o issues on CG. I'm using (2) AirThunder Packs over and under configuration.
___________________________________________

gixxernoob

Where do you have your ESC at? on the side or under the batteries?

Thanks

PM  EMAIL  GALLERY  Attn:RR  Quote
02-10-2008 09:27 PM  10 years agoPost 7
trexflyer2003

rrVeteran

northridge ca,91324

My Posts: All  Forum  Topic

Hi,

I ordered 611+9256 for my T500. Will have it next Thrus.
If you use this combo on your T500, Could you please post some pics to show how you mount 611 on your T500.

Thanks alot.

PM  EMAIL  GALLERY  Attn:RR  Quote
02-11-2008 12:16 AM  10 years agoPost 8
menace

rrKey Veteran

Sydney, Australia

My Posts: All  Forum  Topic

wouldnt a 401 be more than efficient?

!boo!

PM  EMAIL  GALLERY  Attn:RR  Quote
02-11-2008 02:03 AM  10 years agoPost 9
Raptorz499

rrKey Veteran

NJ

My Posts: All  Forum  Topic

Probably...but why not go for the best!!
I will be using the 611 as well and can't wait to fly!!

PM  EMAIL  GALLERY  Attn:RR  Quote
02-11-2008 02:40 AM  10 years agoPost 10
trexflyer2003

rrVeteran

northridge ca,91324

My Posts: All  Forum  Topic

401 is more than enough for my flying skill.
I have heard reputation of 611 for along time and would like to own one.

I know somebody out there is using it on T500. Can I have some pic please.

PM  EMAIL  GALLERY  Attn:RR  Quote
02-11-2008 03:11 AM  10 years agoPost 11
Paul Susbauer

rrApprentice

Hillsboro, OR

My Posts: All  Forum  Topic

Look at this one from my gallery;

Ineptitude - If you can't learn to do something well, learn to enjoy doing it poorly.

PM  EMAIL  GALLERY  Attn:RR  Quote
02-11-2008 03:20 AM  10 years agoPost 12
trexflyer2003

rrVeteran

northridge ca,91324

My Posts: All  Forum  Topic

Thanks Paul Susbauer

PM  EMAIL  GALLERY  Attn:RR  Quote
02-11-2008 03:39 AM  10 years agoPost 13
Paul Susbauer

rrApprentice

Hillsboro, OR

My Posts: All  Forum  Topic

The servo mounting plate I used by the way is one I had sitting around from a tail servo mount for a raptor. I just used the stock plastic screw mounts and split it in half for the wider screw spacing...worked like a champ...

--Paul

Ineptitude - If you can't learn to do something well, learn to enjoy doing it poorly.

PM  EMAIL  GALLERY  Attn:RR  Quote
02-11-2008 03:50 AM  10 years agoPost 14
Raptorz499

rrKey Veteran

NJ

My Posts: All  Forum  Topic

Looks good Paul!! Howz it flyin' for ya?!?!

PM  EMAIL  GALLERY  Attn:RR  Quote
02-11-2008 04:09 AM  10 years agoPost 15
gixxernoob

rrApprentice

fairfax, va

My Posts: All  Forum  Topic

I use Logictech 6100T/6100G combo that was intended for the T600 but I'm using it on my T500 w/o issues on CG. I'm using (2) AirThunder Packs over and under configuration.
___________________________________________

gixxernoob

Where do you have your ESC at? on the side or under the batteries?

Thanks

-----------------

I have my ESC mounted on the right side frame looking from the back. Batteries are located one on top and one on the bottom.


M's Ichiro (51)

PM  EMAIL  GALLERY  Attn:RR  Quote
02-11-2008 04:15 AM  10 years agoPost 16
trexflyer2003

rrVeteran

northridge ca,91324

My Posts: All  Forum  Topic

Thanks gixxernoob

I order tail servo mount for Trex600 and use it on my T500 to mount 9256.

Do I have to modify Carbon plate to fit it on the bracket of T500?

Thanks

PM  EMAIL  GALLERY  Attn:RR  Quote
02-11-2008 04:18 AM  10 years agoPost 17
menace

rrKey Veteran

Sydney, Australia

My Posts: All  Forum  Topic

if ya got the money, go for it

!boo!

PM  EMAIL  GALLERY  Attn:RR  Quote
02-11-2008 06:36 AM  10 years agoPost 18
Paul Susbauer

rrApprentice

Hillsboro, OR

My Posts: All  Forum  Topic

I don't know about the 600 servo mount, but the plate I used just bolted in. The mounts are spaced closer.

With the 611 and the 9256, the tail holds awesome. I have yet to ever have the tail blow out at all with it. With the 5S 4000's I'm running, it actually is perfectly balanced...

--Paul

Ineptitude - If you can't learn to do something well, learn to enjoy doing it poorly.

PM  EMAIL  GALLERY  Attn:RR  Quote
02-11-2008 01:04 PM  10 years agoPost 19
gixxernoob

rrApprentice

fairfax, va

My Posts: All  Forum  Topic

Do I have to modify Carbon plate to fit it on the bracket of T500?

--------------------

I did have to trim (i use scissors or you can dremel it) the top a little bit on the T600 CF tail servo mount.. I'll try to post pics if you want...


M's Ichiro (51)

PM  EMAIL  GALLERY  Attn:RR  Quote
02-11-2008 03:43 PM  10 years agoPost 20
bl8zn

rrVeteran

New Jersey

My Posts: All  Forum  Topic

Throw a 9257 on there to save weight. I'm not able to blow the tail with my flying. I put the "brain" between the frames on the bottom plate to save it from pontential damage from a crash.

PM  EMAIL  GALLERY  Attn:RR  Quote
WATCH
 2 pages [ <<    <    ( 1 )     2     NEXT    >> ] 1386 views POST REPLY
HomeAircraftHelicopter
e-
Align
T-REX 500 › GY611+9256
 Print TOPIC  Make Suggestion 

 3  Topic Subscribe

Tuesday, December 18 - 3:11 pm - Copyright © 2000-2018 RunRyder   EMAILEnable Cookies

The RC discussion world needs to consolidate. RR is now one choice for that. Its software is cutting edge. It hosts on-topic advertising. Help RR increase traffic buy making suggestions, posting in RR's new areas (sites) and by spreading the word.

The RunRyder Difference

• Category system to allow Rep/Vendor postings.
• Classifieds with sold (hidden) category.
• Classifieds with separate view new.
• Answer PMs offsite via email reply.
• Member gallery photos with advanced scripting.
• Gallery photo viewer integrated into postings.
• Highly refined search with advanced back end.
• Hosts its own high end fast response servers.
• Hosts thousands of HD event coverage videos.
• Rewrote entire code base with latest technology.
• No off-topic (annoying) click bait advertising.
Login Here
 New Subscriptions 
 Buddies Online