RunRyder RC
 14  Topic Subscribe
WATCH
 4 pages [ <<    <     2      3     ( 4 )    >    >> ] 9188 views POST REPLY
HomeAircraftHelicopter
e-
Blade
Other › Awesome Feigao Brushless Setup - Main & Tail
03-06-2008 03:36 PM  10 years agoPost 61
Skarn

rrVeteran

Pasadena, MD

My Posts: All  Forum  Topic

Derrik,

I have the same setup (using BP esc's) for under $100 at:

http://www.bphobbies.com

I don't think he was including the battery though in the price.

Skarn

PM  EMAIL  Attn:RR  Quote
03-06-2008 03:40 PM  10 years agoPost 62
derrik504

rrApprentice

marrero,La

My Posts: All  Forum  Topic

yea thats what i was thinking but still a good price thanks man for the link.

PM  EMAIL  Attn:RR  Quote
03-06-2008 03:40 PM  10 years agoPost 63
derrik504

rrApprentice

marrero,La

My Posts: All  Forum  Topic

man the site is down rite now that sucks.

PM  EMAIL  Attn:RR  Quote
03-12-2008 12:49 AM  10 years agoPost 64
DSW

rrApprentice

Oviedo, Florida 32765

My Posts: All  Forum  Topic

Ok, about to give up!
Got the setup all installed. Programmed Rud-to-Rud mix on my X9303 to initialize T9 for Tail Motor; work great.
Release Throttle Hold, while holding right rudder. Spool-up main rotor and center rudder stick.
Can't stop tail from spinning, tried reversing gyro.

Full right rudder input stops tail motor, left input goes full speed.

What am I missing?

PM  EMAIL  GALLERY  Attn:RR  Quote
03-12-2008 01:32 AM  10 years agoPost 65
vsnyder8

rrVeteran

Ft Wayne, IN

My Posts: All  Forum  Topic

Try reversing on your radio, you may have to switch the gyro back, but see what happens first, Reversing the gyro makes it think the tail is going the wrong way (or corrects for wrong way), it sounds like your servo setting is backwards.

Good luck
Van

PM  EMAIL  Attn:RR  Quote
03-12-2008 01:34 AM  10 years agoPost 66
irush

rrApprentice

Greensboro, NC

My Posts: All  Forum  Topic

sounds like you have your rudder channel reversed. With the motor at full speed with full left rudder, is the nose actually going left? I usually arm mine with left rudder.

stupid gravity......

PM  EMAIL  GALLERY  Attn:RR  Quote
03-12-2008 03:13 AM  10 years agoPost 67
DougsRC

rrProfessor

Mass.

My Posts: All  Forum  Topic

I just put on the feiago motor and 6 amp ESC with a cheesy telebee gyro and I absolutely LOVE it ! Holds as good as any belt drive I ever tried.

Watch at YouTube

PM  EMAIL  GALLERY  Attn:RR  Quote
03-12-2008 04:41 PM  10 years agoPost 68
derrik504

rrApprentice

marrero,La

My Posts: All  Forum  Topic

i put the set up that tutelar has on hisexcept i got the bphobbie ESC's and i cant seem to find a pinion.i bought one from the lhs and it does not fit it was a 10tooth from e-flite.any suggestions will be greatly wellcomed.

PM  EMAIL  Attn:RR  Quote
03-12-2008 04:44 PM  10 years agoPost 69
derrik504

rrApprentice

marrero,La

My Posts: All  Forum  Topic

i am also useing the gyro off of my blade400

PM  EMAIL  Attn:RR  Quote
03-12-2008 08:07 PM  10 years agoPost 70
Skarn

rrVeteran

Pasadena, MD

My Posts: All  Forum  Topic

Get the pinion from Horizon Hobby. I got the 8t one for my Fiegao.

Skarn

PM  EMAIL  Attn:RR  Quote
03-12-2008 08:15 PM  10 years agoPost 71
derrik504

rrApprentice

marrero,La

My Posts: All  Forum  Topic

i got the wrong shaft it is 2.3 shaft.i had to order one from bp will be getting them in a couple of days to fit the 2.3 shaft.

PM  EMAIL  Attn:RR  Quote
03-12-2008 08:16 PM  10 years agoPost 72
derrik504

rrApprentice

marrero,La

My Posts: All  Forum  Topic

ordered one with a collar and one press on will see what works best.

PM  EMAIL  Attn:RR  Quote
03-12-2008 10:49 PM  10 years agoPost 73
DSW

rrApprentice

Oviedo, Florida 32765

My Posts: All  Forum  Topic

Reversed servo was the problem.

Thanks, vsnyder8 and irush!

One question, I seem to recall, with the stock setup, the tail motor would run in both directions, depending on rudder stick input. I could pirouette on the training gear in either direction on the ground. Should it now?

PM  EMAIL  GALLERY  Attn:RR  Quote
03-13-2008 01:07 AM  10 years agoPost 74
vsnyder8

rrVeteran

Ft Wayne, IN

My Posts: All  Forum  Topic

The tail on the blade cp only spins one direction, the opposing force of the main blade turns the heli the other direction, the tail blade is probably free wheeling which makes it look like it is spinning the other direction.

Van

PM  EMAIL  Attn:RR  Quote
03-18-2008 07:18 PM  10 years agoPost 75
derrik504

rrApprentice

marrero,La

My Posts: All  Forum  Topic

i got my cp in seperate and hhgyro from my blade 400 and it is one bad lil heli now.i am using the setup tutelar has on his and i recumend it to anyone.thanks tutelar for sharing with us.

PM  EMAIL  Attn:RR  Quote
03-18-2008 08:36 PM  10 years agoPost 76
tutelar-rc

rrKey Veteran

Nobleton, Ontario - Canada

My Posts: All  Forum  Topic

Glad to hear you are enjoying it - mine is still going strong!

Happy Flying!

PM  EMAIL  GALLERY  Attn:RR  Quote
03-20-2008 04:37 PM  10 years agoPost 77
Gyronut

rrProfessor

Martinsville In.

My Posts: All  Forum  Topic

Nice video Doug.

Rick

PM  EMAIL  GALLERY  Attn:RR  Quote
03-21-2008 01:25 PM  10 years agoPost 78
zaw

rrKey Veteran

Lebanon, NH - USA

My Posts: All  Forum  Topic

I can't wait to get mine.
I found GWS Motor+Props kit at LHS here so i installed and its working pretty good until I get my BL from BP.

I don't know because of gyro suck or ESC is giving too much power to the motor then gyro is asking, I found my self keep having to trim to Rudder Left about 30 points on Futaba 6EXH because its wants to spin clockwise very slowly in the air. Once I set the trim right, its lock in good and I can hover down in basement without any rudder input at all.

I have Esky HH gyro with Esky Brush Gyro. BP hobbies kit is coming hopefully this Saturday.

ಠ_ಠ HBK2 built with inexpensive parts! ٩๏̯͡๏)۶ Gaui425

PM  EMAIL  GALLERY  Attn:RR  Quote
03-22-2008 06:32 PM  10 years agoPost 79
zaw

rrKey Veteran

Lebanon, NH - USA

My Posts: All  Forum  Topic

Bad luck, I just suck with this.

I got my kit today, with small bullts connectors on each end, flew great it was windy out too.
then tail spin out of control and had to drop it, broke paper clip, replaced, checked out everthing is fine tail initlize etc. Took it back out and beeping on tail seem louder but spin good lift off then tail stalled, landed and smoke came out of the motor and ESC smell burnt and all the wires melted inside the tail boom.

$65 down the drain

ಠ_ಠ HBK2 built with inexpensive parts! ٩๏̯͡๏)۶ Gaui425

PM  EMAIL  GALLERY  Attn:RR  Quote
03-26-2008 03:50 AM  10 years agoPost 80
zaw

rrKey Veteran

Lebanon, NH - USA

My Posts: All  Forum  Topic

on closer look look like one of the wires from the motor is broken and probably caused to burn out the ESC. I already open it and probably can't return it any more, I use clips to test it and it beeps properly and spin up. I also found a thread to fix them things. Probably get Medusa set later, after I do some side jobs for my heli funds.

ಠ_ಠ HBK2 built with inexpensive parts! ٩๏̯͡๏)۶ Gaui425

PM  EMAIL  GALLERY  Attn:RR  Quote
WATCH
 4 pages [ <<    <     2      3     ( 4 )    >    >> ] 9188 views POST REPLY
HomeAircraftHelicopter
e-
Blade
Other › Awesome Feigao Brushless Setup - Main & Tail
 Print TOPIC  Make Suggestion 

 14  Topic Subscribe

Saturday, June 23 - 11:00 pm - Copyright © 2000-2018 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online