Raptor 90 SE (not an upgraded 90 or 60)
Metal Mixing Arms
Metal Clutch Block
95mm V Paddles
No main or tail blades
Has 60 size boom
No Carbon Baseplate (lost it somewhere)
Arizona helis Canopy (paint chips on bottom, but looks decent)
OS 91 CSPEC-PS (needs a pump)(head is dented but still runs good)
MPII (dented on inside where it doesn't show on heli)
KO-PROPO 2123 Collective Servo.
Spare new hardened flybar
Spare Main bearings
Plastic Tail Blades
The extra motor mount and plastic fan shown in pics are not included
This machine was my regular flyer until July when I bought a synergy. I flew 690mm blades and 95mm tails on the short boom. It is a nice reliable heli. I never had any problems with it. While taking pics, I remembered that the servo tray was repaired long ago with G10 (see pic). 1 metal A-arm was replaced with a plastic one. Also the carbon tail fin has a crack, but it is still strong and has flown this way for months. Consider the engine/pipe a gimme. The engine just needs a new pump to run. It has a lot of fuel through it, but would be a great starter motor for someone stepping up to a 90.