RunRyder RC
WATCH
 1 page 441 views Post Reply
HomeRC & Power✈️Aircraft🚁HelicopterRadio - Servo - Gyro - Gov - Batt › Setting on JR 3810/8103 with Multigov,(Self Solved)
08-05-2007 05:35 AM  13 years ago
Topic Vote0Post 1
windheli

rrNovice

Adelaide, SA

MyPosts All Forum Topic
Setting on JR 3810/8103 with Multigov,(Self Solved)
Luckily passed Honolulu last month and got chance to get Multigov direct from Bob
now get time to install the muligov on my Raptor 50. But can't find any setting description about how to set the "RPM select function" JR3810adt for Multigov.I use Gear channel for the selection. Is there anybody can help me on this issue?
Thanks a lot,Have nice flys in the weekend!
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
08-07-2007 02:27 PM  13 years ago
windheli

rrNovice

Adelaide, SA

MyPosts All Forum Topic
Hi guys,
I think JR 3810 is kind of old radio. but i still made it by my own. I followed the guide of the 10X on Bob's site coz 3810 and 10X are the same time products.
my setting is following, just in case someone meet the same problem as me:
JR 3810ADT
Plug the "RPM Select" input to the GEAR of your receiver.
Set programmable mix 1 to be "GEAR->GEAR", then go to mix 2 to tie "#FMOD->GEAR" and set SW: GEAR.
Go back to programmable mix 1 and store the two endpoints L at 100 and H at 0.
The MultiGov SPEED#'s should now change on the LCD as you flip your radio's flight mode switch when the GEAR is ON. If the SPEED#s are reversed, just reverse the channel that "RPM Select" is plugged into with your radio. When the GEAR is OFF there is only SPEED1 for three Flight mode.

Good luck
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
08-07-2007 02:30 PM  13 years ago
z11355

rrMaster

New England

MyPosts All Forum Topic
I dont have a Multigov but on the 8103, you need to use Aux2 for
the control if you want auto RPM select (it's the only channel that
can be made to track the flight mode switch automatially)
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
08-07-2007 02:39 PM  13 years ago
windheli

rrNovice

Adelaide, SA

MyPosts All Forum Topic
I use the AUX2 for Gyro SENS. and GEAR channel for RPM select, It is working now.
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
WATCH
 1 page 441 views Post Reply
HomeRC & Power✈️Aircraft🚁HelicopterRadio - Servo - Gyro - Gov - Batt › Setting on JR 3810/8103 with Multigov,(Self Solved)
Print TOPIC

 1  Topic Subscribe

Tuesday, September 22 - 11:53 pm - Copyright © 2000-2020 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online